Construction and Expected Performance of the Hadron Blind Detector for the PHENIX Experiment at RHIC

A Milov; W Anderson; B Azmoun; C-Y Chi; A Drees; A Dubey; M Durham; Z Fraenkel; J Harder; T Hemmick; R Hutter; B Jacak; J Kamin; A Kozlov; M Naglis; P O'Connor; R Pisani; V Radeka; I Ravinovich; T Sakaguchi; D Sharma; A Sickles; S Stoll; I Tserruya; B Yu; C Woody

doi:10.1088/0954-3899/34/8/s77 10.1088/0954-3899/34/8/s78

Home/Archive/arXiv

arXiv · physics/0701273

Construction and Expected Performance of the Hadron Blind Detector for the PHENIX Experiment at RHIC

View original source ↗Read source document ↗Export metadata ↓

Abstract

A new Hadron Blind Detector (HBD) for electron identification in high density hadron environment has been installed in the PHENIX detector at RHIC in the fall of 2006. The HBD will identify low momentum electron-positron pairs to reduce the combinatorial background in the $e^{+}e^{-}$ mass spectrum, mainly in the low-mass region below 1 GeV/c$^{2}$. The HBD is a windowless proximity-focusing Cherenkov detector with a radiator length of 50 cm, a CsI photocathode and three layers of Gas Electron Multipliers (GEM). The HBD uses pure CF$_{4}$ as a radiator and a detector gas. Construction details and the expected performance of the detector are described.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeX RIS

A Milov, W Anderson, B Azmoun, C-Y Chi, A Drees, A Dubey, M Durham, Z Fraenkel, J Harder, T Hemmick, R Hutter, B Jacak, J Kamin, A Kozlov, M Naglis, P O'Connor, R Pisani, V Radeka, I Ravinovich, T Sakaguchi, D Sharma, A Sickles, S Stoll, I Tserruya, B Yu, C Woody. 2007-01-23. Construction and Expected Performance of the Hadron Blind Detector for the PHENIX Experiment at RHIC. https://doi.org/10.1088/0954-3899%2F34%2F8%2Fs77%2010.1088%2F0954-3899%2F34%2F8%2Fs78

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗

arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗

arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗