arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · cond-mat/0102021

The electronic state of vortices in YBa2Cu3Oy investigated by complex surface impedance measurement

Yoshishige Tsuchiya·Katsuya Iwaya·Kentarou Kinoshita·Tetsuo Hanaguri·Haruhisa Kitano·Atsutaka Maeda·Kenji Shibata·Terukazu Nishizaki·Norio Kobayashi
View original source ↗Read source document ↗Export metadata ↓

Abstract

The electromagnetic response to microwaves in the mixed state of YBa2Cu3Oy(YBCO) was measured in order to investigate the electronic state inside and outside the vortex core. The magnetic-field dependence of the complex surface impedance at low temperatures was in good agreement with a general vortex dynamics description assuming that the field-independent viscous damping force and the linear restoring force were acting on the vortices. In other words, both real and imaginary parts of the complex resistivity, ρ_1, and ρ_2, were linear in B. This is explained by theories for d-wave superconductors. Using analysis based on the Coffey-Clem description of the complex penetration depth, we estimated that the vortex viscosity ηat 10 K was (4 \sim 5) \times 10^{-7} Ns/m^2. This value corresponds to ω_0 τ\sim 0.3 - 0.5, where ω_0 and τare the minimal gap frequency and the quasiparticle lifetime in the vortex core, respectively. These results suggest that the vortex core in YBCO is in the moderately clean regime. Investigation of the moderately clean vortex core in high-temperature superconductors is significant because physically new effects may be expected due to d-wave characteristics and to the quantum nature of cuprate superconductors. The behavior of Z_s as a function of B across the first order transition (FOT) of the vortex lattice was also investigated. Unlike Bi2Sr2CaCu2Oy (BSCCO), no distinct anomaly was observed around the FOT in YBCO. Our results suggest that the rapid increase of X_s due to the change of superfluid density at the FOT would be observed only in highly anisotropic two-dimensional vortex systems like BSCCO. We discuss these results in terms of the difference of the interlayer coupling and the energy scale between the two materials.

Explore related subjects

cond-mat.supr-con

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yoshishige Tsuchiya, Katsuya Iwaya, Kentarou Kinoshita, Tetsuo Hanaguri, Haruhisa Kitano, Atsutaka Maeda, Kenji Shibata, Terukazu Nishizaki, Norio Kobayashi. 2001-03-09. The electronic state of vortices in YBa2Cu3Oy investigated by complex surface impedance measurement. https://doi.org/10.1103/physrevb.63.184517

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Growth of superconducting boron doped diamond on 4inch silicon wafers

Superconducting boron-doped diamond (BDD) films were grown on 4-inch silicon wafers by microwave plasma chemical vapour deposition using gas-phase B/C ratios ranging from 6536 to 36421 ppm. Surface morphology, boron incorporation and superconducting properties were investigated as a function of gas-phase boron concentration. No systematic variation in apparent lateral grain size was observed across the series. Superconductivity was observed in all films except that grown at a B/C ratio of 6536 ppm within the measured temperature range down to 2 K. The superconducting transition temperature initially increased with increasing B/C ratio, reaching a maximum T$_c$ of 4.03 K at 24691 ppm, before decreasing at higher gas-phase B/C ratios. The corresponding resistive upper critical field at 2 K reached 3.091 T. Raman spectroscopy showed an increase in boron incorporation with increasing gas-phase B/C ratio up to 30303 ppm, followed by a slight decrease at 36421 ppm. Spatial measurements across the film grown at 24691 ppm showed T$_c$ values of 4.02, 4.19 and 3.33 K at the centre, intermediate and edge positions, respectively, with Raman spectroscopy showing a corresponding spatial variation in boron concentration. Comparison with previous growth on 2-inch wafers showed that substantially higher gas-phase B/C ratios were required to obtain comparable boron concentrations and superconducting properties on 4-inch wafers, indicating reduced boron incorporation efficiency during large-area growth. These results demonstrate the feasibility of producing superconducting BDD over a substantial area of a 4-inch silicon wafer while identifying boron incorporation and radial uniformity as key parameters for further wafer-scale optimisation.

cond-mat.supr-con↗
arXiv2026

Multigap superconductivity in Ising superconductors: The case of (LaSe)1.14(NbSe2)m misfit layer compounds

Strong spin-orbit coupling and broken inversion symmetry in transition metal dichalcogenides give rise to Ising superconductivity, a spin-protected pairing state first identified in monolayer NbSe$_2$ through in-plane critical fields far exceeding the Pauli limit. More recently, Ising superconductivity has been proposed as a potential route to unconventional and even topological superconductivity in bulk misfit compounds. Here, we investigate the superconducting order parameter of layered misfit compounds composed of alternating transition metal dichalcogenide and rocksalt layers, which host extremely doped, electronically decoupled NbSe$_2$ sheets within a three-dimensional crystal. Using directional scanning tunneling spectroscopy on the misfit superconductors (LaSe)$_{1.14}$(NbSe$_2$) and (LaSe)$_{1.14}$(NbSe$_2$)$_2$, we uncover a strongly anisotropic multigap superconducting state: a fragile gap on the $Γ$-centered Fermi-surface pocket coexists with a robust, intrinsic gap on the K and K$'$ pockets. These features are in quantitative agreement with momentum-resolved gaps $Δ(\mathbf{k})$ obtained from anisotropic Migdal-Eliashberg calculations. The marked fragility of the $Γ$-centered gap, combined with the strong sensitivity of the critical temperature to non-magnetic disorder, points to pairing beyond conventional $s$-wave symmetry, potentially involving a topological order parameter. These results establish NbSe$_2$-based misfit compounds as a tunable bulk platform for multigap, unconventional superconductivity, with Ising protection offering a promising route toward topological pairing.

cond-mat.supr-con↗
arXiv2026

Thermal Hall effect in elemental niobium, a two-gap superconductor

Niobium holds a pivotal place in superconductivity history: it is not only the elemental superconductor with the highest critical temperature, but also a long-standing candidate for multiband pairing whose evidence has remained controversial. A two-gap scenario was proposed as early as 1959, yet experimental proof stayed elusive. Here, through thermal Hall effect measurements, we unambiguously demonstrate a crossover in transverse thermal transport below $T_{\rm c}$, where the dominant carrier switches from hole-like to electron-like upon cooling. This crossover is a clear hallmark of two distinct superconducting condensates. Fitting our data to a two-gap Bardeen-Rickayzen-Tewordt (BRT) model yields a second energy gap of approximately 0.22 $k_{\rm B}T_{\rm c}$, only 11\% of the dominant gap. This small gap size accounts for the difficulty in resolving the two-gap structure in earlier experiments. Crucially, the temperature at which the electron-like contribution to longitudinal thermal conductivity begins to dominate coincides with the onset of the sign reversal in the thermal Hall coefficient, confirming consistency between the two methods, and providing crucial information on the assignment of the superconducting gaps to their respective hole- or electron-like Fermi surface sheets. These findings not only resolve a longstanding controversy, but also establish that multigap superconductivity is far more common than previously assumed, and demonstrate the thermal Hall effect as a powerful probe for resolving gap multiplicities in superconductors.

cond-mat.supr-con↗