arXiv Science⌕ Search

arXiv · 2611.23183

Effect of superplastic deformation on the intergranular corrosion resistance of austenitic steel 321 with different types of UFG structure: A case of homogeneous and heterogeneous microstructure obtained by ECAP

Abstract

The effects of superplasticity (SP) on the structure, hardness, and intergranular corrosion (IGC) resistance of UFG 321L steel are reported. By increasing the number of the ECAP cycles (N) and varying the ECAP temperature, and annealing temperature, the degree of the microstructural heterogeneity was changed. Regardless of the microstructural homogeneity degree, UFG steels demonstrated the possibility of realizing the SP effect at temperatures below the onset temperature of dynamic recrystallization. The dependence of ductility of the UFG steel on the test temperature is non-monotonic with a minimum at 450-600C. The maximum elongation to failure (~250%) was achieved at a SP temperature of 800C. The SP deformation of the UFG steel is controlled by the power law creep. It is shown that the hardness of UFG steel samples after SP is equal than the hardness of UFG steels annealed at the same temperature. It is also shown what SP leads to a decrease in the IGC resistance of the UFG steel. Heterostructured steel have reduced ductility, as well as lower resistance to IGC after tension tests at room temperature (RT). The minimum IGC resistance is ensured at N=2, and the maximum - at N=4. The IGC resistance of homogeneous UFG samples after tension testing exceeds the IGC resistance of coarse-grained steel. Tension test at a RT has the greatest negative effect on the IGC resistance of heterostructured steel, and the least negative effect on the IGC resistance of homogeneous steel. Increasing the number of ECAP cycles enhances the ductility of the UFG steel at 750-900C. Increasing the ECAP temperature results in a simultaneous decrease in ductility and flow stress. Heterostructured steel exhibits minimal values of the activation energy of SP deformation. Increasing the number of ECAP cycles and increasing the ECAP temperature lead to an increase in the activation energy of SP deformation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A. V. Nokhrin, V. I. Kopylov, M. K. Chegurov, S. V. Shotin, C. V. Likhnitskii, N. V. Melekhin, D. A. Zotov, K. A. Rubtsova, O. E. Pirozhnikova, N. N. Berendeev, D. D. Kulagin. 2026-11-17. Effect of superplastic deformation on the intergranular corrosion resistance of austenitic steel 321 with different types of UFG structure: A case of homogeneous and heterogeneous microstructure obtained by ECAP. https://arxiv.science/abs/2611.23183

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Evidence for crystal-field-selected octupolar order in wolframite oxides

Magnetic order can involve higher-rank moments such as octupoles, which are difficult to identify in strongly distorted crystals. Here we present evidence for predominantly octupolar order in the monoclinic wolframites MgReO$_4$ and ZnReO$_4$. Muon spin spectroscopy detects magnetic transitions near 83 and 126 K, respectively, with similar precession frequencies in both compounds. An ab initio effective Hamiltonian shows that strong crystal fields split the spin--orbit quartet, isolating low-energy doublets with weak dipolar character. Exchange selects octupole-dominated order in distinct collinear antiferromagnetic structures, with moments along $b$ in MgReO$_4$ and tilted within the $ac$ plane in ZnReO$_4$. The estimated dipole moments of 0.06 and 0.12 $μ_{\mathrm{B}}$ per Re, respectively, are consistent with the absence of a resolved magnetic contribution in neutron powder diffraction. A single-ion model illustrates how octupolar states generate local fields with a vanishing net dipole moment. These findings support a crystal-field route to hidden magnetism beyond double perovskites.

cond-mat.mtrl-sci↗

Substrate Role in Polaron Formation on Single-layer Transition Metal Dihalides

Single-layer transition metal dihalides grown on conducting substrates were shown to host stable polarons. Here, we investigate small polarons in a single layer of the insulator MnBr$_2$, which was grown by molecular beam epitaxy on three different substrates: graphene on Ir(110), graphene on Ir(111), and Au(111). Polarons on these substrates can be created, converted, and moved by the STM tip when a tunneling current flows at a proper bias voltage. Four polaron species are observed in MnBr$_2$ grown on graphene Ir(110), three of which resemble the species previously observed for CoCl$_2$ on graphite, whereas MnBr$_2$ grown on the other substrates exhibits only two of these four species. Changing the substrate from graphene on Ir to Au(111) increases polaron number density by an order of magnitude. These large differences demonstrate that the choice of conducting substrate plays a decisive role in determining polaron phenomenology in substrate-supported single-layer insulators. Two unique observations are reported for polarons in MnBr$_2$ on graphene supported by Ir(110): First, mobile polarons are guided by the periodic potential originating from the super-moiré of MnBr$_2$ with graphene and Ir(110); second, polarons remain stable up to 300\,K.

cond-mat.mtrl-sci↗

Systematic comparison of approximations and functionals in first-principle calculations of aluminum-based III-V ferroelectric nitrides

We revisit first-principles predictions of structural, ferroelectric, and electronic properties in aluminum-based III-V nitride alloys, focusing on Al1-xScxN and Al1-xBxN. Using density functional theory within a unified 48-atom supercell framework, we systematically assess the role of chemical disorder and exchange-correlation approximations by comparing the virtual crystal approximation (VCA) and special quasirandom structures (SQS), as well as PBE, PBESol, SCAN, and SCAN+rVV10 functionals. We demonstrate that, even amongst the similar PBE and PBESol functionals, large quantitative and qualitative differences emerge. In particular, VCA or SQS PBESol modeling (a popular functional) underestimates the stability domain of the ferroelectric wurtzite phase in Al1-xScxN compared to SQS PBE or SQS SCAN. We demonstrate that the 5-fold coordinated hexagonal phase predicted in 2002 by Farrer and Bellaiche [Phys. Rev. B 66, 201203] is a metastable state whose energy lies between that of the four-fold coordinated ferroelectric wurtzite phase and the energy of the six-fold coordinated rocksalt phase below the transition point. In contrast, Al1-xBxN shows a much faster destabilization of the wurtzite ferroelectric phase, with bond breaking which strongly distorts the wurtzite structure (with enhanced polarization) and eventually favors a zincblende phase and a threefold coordinated hexagonal layer phase. Our analysis highlights the critical importance of both local disorder and exchange-correlation treatment in the quantitative prediction of the functional properties of III-V nitride ferroelectrics.

cond-mat.mtrl-sci↗