arXiv Science⌕ Search

arXiv · 2611.21415

Shared-State Inverse Synthesis of Dual-Mode Conformal Metasurfaces for Low Scattering and Telemetry

Abstract

A conformal surface that alternates between sectoral low scattering and directive telemetry poses a shared-hardware inverse problem when both modes must use one finite passive impedance alphabet, although their spatial codebooks may differ. This paper formulates and solves that mixed continuous--discrete problem at the effective impedance-boundary level. Reference-centered Tikhonov preimages prescribe restricted radiation data; inverse-source null-space freedom then moves each current within its data-equivalent class toward impedance profiles quantizable by the same alphabet. A line-searched Gauss--Newton update, common-state assignment and projected-centroid updates, and exact forward refinement determine the currents, two codebooks, and one passive library. Data invariance, the current-to-impedance differential, the optimal state update, monotonic mismatch reduction, and a forward perturbation bound are derived. A full-mutual-coupling two-dimensional TM study of a $4λ_0$-diameter cylinder uses 64 physical cells and one shared eight-state library. On a 256-unknown validation model, the worst power ratio over $\pm10^{\circ}$ monostatic sectors and incidence angles from $-30^{\circ}$ to $30^{\circ}$ is $-11.6$~dB relative to a PEC cylinder; telemetry directivity is 13.1~dB with $-13.6$-dB peak sidelobes and a $1^{\circ}$ pointing error. A separate Fourier--Galerkin formulation, converged through 513 complex modes without reoptimization, gives $-11.36$~dB and 13.02~dB for the corresponding worst-sector and directivity metrics. The results establish feasibility at the effective impedance-boundary level; they do not establish unit-cell, bias-network, or platform-level realizability.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mohamed R. Khodja, Ghala A. Alomar. 2026-11-16. Shared-State Inverse Synthesis of Dual-Mode Conformal Metasurfaces for Low Scattering and Telemetry. https://arxiv.science/abs/2611.21415

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermoelectric properties of metal-semiconductor percolation composites

We analyze the thermoelectric response of composite materials comprising homogeneous semiconductor hosts with randomly distributed metallic inclusions. We demonstrate that the properties of such materials are strongly affected by the percolation transition (with background conductivity). We show that in the vicinity of the percolation threshold, the power factor and the thermoelectric figure of merit strongly depend on both the concentration and arrangement of inclusions. Finally, we identify promising regimes for enhancing the power factor in realistic composites.

physics.app-ph↗