arXiv Science⌕ Search

arXiv · 2611.19004

Tunable Multi-Frequency-Band Generator and Detector of AC Signals Based on a Spin Hall Device with Two Antiferromagnetic Layers

Abstract

Antiferromagnetic (AFM) spin Hall oscillators offer an electrical route to compact terahertz sources, while AFM spin Hall diodes can be used as a promising detectors of terahertz signals, however, their attainable frequency and the redout efficiency are constrained by the dynamics of a single AFM layer. We theoretically and numerically investigate a spin Hall multilayer junction Pt/AFM/Pt/AFM/Pt comprising two canted AFM layers, driven by independent drive DC currents flowing in the outer platinum (Pt) layers. Using a model based on the coupled Landau-Lifshitz-Gilbert-Slonczewski equations for four AFM sublattices and a phase-dependent two-interface spin Hall magnetoresistance model, we show that the device manifests itself as a DC current-driven oscillating spin Hall magnetoresistance. When an additional DC (AC) signal current is applied to the junction, the device generates an output AC (DC) voltage. Our model predicts current-driven, locked, co- and counter-rotational states of the net magnetization at Neel-vector frequencies in the top and bottom AFM layers, respectively. These states result in a multi-frequency response of the spin Hall magnetoresistance at the sum and difference frequencies. The counter-rotation regime additionally activates the phase-sensitive mixing contribution, producing a fourth harmonic. In contrast, the co-rotation regime provides a difference-frequency channel on the order of 100 GHz, although mutual locking prevents this output from being tuned continuously toward zero. Our estimations show that the device matched to an external load can generate output AC power of 1.2 nW at the second harmonic and 0.8 pW at the fourth harmonic, and can produce a DC voltage of about 1 mV for a 6 mA input signal current.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Oleh Shtanko, Volodymyr Prokopenko, Oleksandr Prokopenko. 2026-11-13. Tunable Multi-Frequency-Band Generator and Detector of AC Signals Based on a Spin Hall Device with Two Antiferromagnetic Layers. https://arxiv.science/abs/2611.19004

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermoelectric properties of metal-semiconductor percolation composites

We analyze the thermoelectric response of composite materials comprising homogeneous semiconductor hosts with randomly distributed metallic inclusions. We demonstrate that the properties of such materials are strongly affected by the percolation transition (with background conductivity). We show that in the vicinity of the percolation threshold, the power factor and the thermoelectric figure of merit strongly depend on both the concentration and arrangement of inclusions. Finally, we identify promising regimes for enhancing the power factor in realistic composites.

physics.app-ph↗