arXiv · 2611.14745
Development of Sapphire-Based Solid-State Neutron Detectors for Fusion Environments
Abstract
Single-crystal diamond is the reference solid-state technology for fast neutron detection in fusion devices. Despite this, its complex manufacturing increases their costs and puts limitations on their geometry. Moreover, the limits in their long-term stability and their behaviour in harsh environments further constraint its applications. Synthetic sapphire (Al2O2) is a promising alternative as a solid state detector material: it is available in large, low-cost wafers and features both a wider bandgap and a higher displacement energy compared to diamond. Despite this, it has so far received little-to-no attention as a neutron detector. This work presents the first steps of a development programme for sapphire-based fast neutron detectors. Eight prototypes with 4.5 x 4.5 mm2 and 9 x 9 mm2 active areas and 625 um thickness were fabricated from commercial wafers with Al-Si electrodes and coupled to different electronic configurations. All prototypes detected 5.47 MeV alpha particles from a 241Am source, confirming the viability of both the fabrication process and the use of sapphire as an active material. The small signals (30-40 mV over a peak-to-peak noise of about 8 mV) and the count rate increasing with bias indicate that sapphires will require higher electric fields than the ones experimented in the work (up to about 2.5 kV). Geant4 simulations were also used to estimate the response of a sapphire detector to 14.06 MeV (DT) neutrons, highlighting the perspectives of the detector as a fusion diagnostic.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Matteo Hakeem Kushoroa, Stephanie Cancelli, Gabriele Croci, Benno Margesin, Federica Mantegazzini, Enrico Perelli Cippo. 2026-11-10. Development of Sapphire-Based Solid-State Neutron Detectors for Fusion Environments. https://arxiv.science/abs/2611.14745
Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.