arXiv Science⌕ Search

arXiv · 2611.12706

The Weight Is in the Reading: Hidden States in Memristors, Memlumors, and Electrochemical Transistors

Abstract

Physical synapses are routinely described by a single number, the weight, that is identified with a conductance, a current, or a luminescence yield. This identification conflates two different objects: the internal state that the device stores, and the signal obtained when that state is read. Building on Chua's formulation of memristive systems, we separate the state variable, which evolves with the excitation history, from the observation map that converts it into a measured signal, and we define the weight as the outcome of a specified read protocol. Three platforms show the consequences: a memristor, in which the same voltage writes and reads; a memlumor, in which light both modifies the state and produces the photoluminescence that reports it; and an organic electrochemical transistor (OECT), in which the gate writes and the channel reads. In the transistor, two states prepared by different histories give the same channel current at a specific drain bias and become distinguishable again when the bias is changed, while the stored charge persists and the gate current continues to separate them. Published experiments provide precedents: a drain-bias-dependent cancellation of the OECT transient, and trapped charges in perovskite memlumors that are invisible to conventional time-resolved photoluminescence but revealed by a read-write-read sequence. A synaptic weight is therefore not a property of the material alone but of the material together with its readout, and reports of synaptic behavior should specify what is stored, what is measured, and how one is inferred from the other.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gonzalo Rivera-Sierra, Heyi Zhang, Daiki Nishioka, Takashi Tsuchiya, Juan Bisquert. 2026-11-09. The Weight Is in the Reading: Hidden States in Memristors, Memlumors, and Electrochemical Transistors. https://arxiv.science/abs/2611.12706

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermoelectric properties of metal-semiconductor percolation composites

We analyze the thermoelectric response of composite materials comprising homogeneous semiconductor hosts with randomly distributed metallic inclusions. We demonstrate that the properties of such materials are strongly affected by the percolation transition (with background conductivity). We show that in the vicinity of the percolation threshold, the power factor and the thermoelectric figure of merit strongly depend on both the concentration and arrangement of inclusions. Finally, we identify promising regimes for enhancing the power factor in realistic composites.

physics.app-ph↗