arXiv Science⌕ Search

arXiv · 2611.12431

Mechanisms of Zener diode and ohmic contact resulting from a heavily doped p-n junction: A novel explanation in terms of impurity-photovoltaic-effect resulting from infrared self-emission at room-temperature

Abstract

In textbooks, a quantum-mechanical tunneling mechanism based on electron-wavefunction is used to explain Zener diode as well as ohmic contact resulting from a heavily doped p-n junction. In this study, an attempt in particle description is made to explain these devices. Any object at room-temperature emits infrared (IR) photons. The process of heavy doping can cause many defects. The self-absorption of the IR emission could be achieved through sub-band-gap excitations due to defects, creating carriers. In a heavily doped p-n junction device, some of the IR-generated carriers diffuse into the junction which has a built-in field. The built-in field sweeps out the carriers, creating IR photocurrent. The reverse leakage current of the p-n junction is regarded as the IR photocurrent according to a precedent where impurity-photovoltaic-effect is used to explain circuit devices (arXiv:2510.18226). Heavy doping results in not only a great many IR-generated carriers but also an avalanche effect at low voltage, producing Zener breakdown. Additionally, the impurity-photovoltaic-effect can make a reasonable contribution to explaining the temperature dependence of Zener breakdown. If the doping is very heavy, the heavily doped p-n junction can be altered to create an ohmic contact, which can also be explained in terms of impurity-photovoltaic-effect. Not only quantum mechanics, but also this photovoltaic mechanism in particle description can explain the above devices. Considering the wave-particle duality, the combination of quantum-mechanical and photovoltaic mechanisms is suggested to explain these devices. Each mechanism plays a big or small role in the explanation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jianming Li. 2026-11-11. Mechanisms of Zener diode and ohmic contact resulting from a heavily doped p-n junction: A novel explanation in terms of impurity-photovoltaic-effect resulting from infrared self-emission at room-temperature. https://arxiv.science/abs/2611.12431

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermoelectric properties of metal-semiconductor percolation composites

We analyze the thermoelectric response of composite materials comprising homogeneous semiconductor hosts with randomly distributed metallic inclusions. We demonstrate that the properties of such materials are strongly affected by the percolation transition (with background conductivity). We show that in the vicinity of the percolation threshold, the power factor and the thermoelectric figure of merit strongly depend on both the concentration and arrangement of inclusions. Finally, we identify promising regimes for enhancing the power factor in realistic composites.

physics.app-ph↗