arXiv Science⌕ Search

arXiv · 2611.11037

Demonstration of High fmax (> 80 GHz) in Recessed-Gate and Passivated $\mathrm{Al_{0.60}Ga_{0.40}N}$ Channel RF HEMTs

Abstract

In this work, ultra-wide bandgap (UWBG) $\mathrm{Al_{0.60}Ga_{0.40}N}$ channel high-electron-mobility transistors (HEMTs) with an $\mathrm{Al_{0.81}Ga_{0.19}N}$ barrier and an $\mathrm{Al_{0.86}Ga_{0.14}N}$ back barrier were fabricated. The devices featured a recessed T-gate structure and $\mathrm{SiO_2}$ passivation. Scaled devices achieved a cutoff frequency ($f_{\mathrm{T}}$) of 35 GHz, a maximum oscillation frequency ($f_{\mathrm{max}}$) of 82 GHz, and an average breakdown field $> 3 \mathrm{MV/cm}$, while maintaining a reasonable current collapse of $\sim 20\%$ under a 40 V drain bias in pinch-off condition. Devices with larger dimensions demonstrated a high off-state breakdown voltage of 883 V and an $f_{\mathrm{T}}$ of 24 GHz, yielding a high Johnson's figure of merit ($\mathrm{JFOM}$) of 21.19 $\mathrm{THz \cdot V}$. Across all device geometries, a high $I_{\mathrm{ON}}/I_{\mathrm{OFF}}$ ratio exceeding $10^6$ was observed with drain and gate leakage currents strictly below $10^{-6} \mathrm{A/mm}$. This work demonstrates an optimized design for $\mathrm{AlGaN}$ channel RF HEMTs and their excellent potential for X- to Ka-band applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Meherab Hossain, Ruixin Bai, Swarnav Mukhopadhyay, Brahmani Challa, Guangying Wang, Surjava Sanyal, Md Tahmidul Alam, Khush Gohel, Rafael A. Choudhury, Shubhra S. Pasayat, Chirag Gupta. 2026-11-08. Demonstration of High fmax (> 80 GHz) in Recessed-Gate and Passivated $\mathrm{Al_{0.60}Ga_{0.40}N}$ Channel RF HEMTs. https://arxiv.science/abs/2611.11037

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite arXiv Science by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related papers

Terahertz emission from $α$-W/CoFe epitaxial spintronic emitters

We report efficient terahertz (THz) generation in epitaxial $α$-W/Co$_{60}$Fe$_{40}$ spintronic emitters. Two types of emitters have been investigated; epitaxial $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ and $α$-W$(001)$/Co$_{60}$Fe$_{40}(001)$ deposited on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$) and MgO($001$) substrates, respectively. First principle calculations of the electronic band structure at the W$(001)$ surface reveal Dirac-type surface states, similar to that reported previously for the W$(110)$ surface. The generated THz radiation is about $10\%$ larger for $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ grown on single crystalline Al$_{2}$O$_{3}$($11\bar{2}0$), which is explained by the fact that the $α$-W$(110)$/Co$_{60}$Fe$_{40}(110)$ interface for this emitter is more transparent to the spin current due to the presence of Ångstr\" om-scale interface intermixing at the W/CoFe interface. Our results also reveal that the generation of THz radiation is larger when pumping with the laser light from the substrate side, which is explained by a larger part of the laser light due to interference effects in the film stack being absorbed in the ferromagnetic Co$_{60}$Fe$_{40}$ layer in this measurement configuration.

physics.app-ph↗

Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel

As terahertz (THz) frequencies emerge as promising candidates for next-generation wireless networks, accurate characterization of propagation mechanisms in indoor/outdoor environments becomes essential for system design and performance optimization. This article presents an experimental and theoretical investigation of structure-induced indoor surface scattering on THz channels, examining how material properties and structural configurations jointly govern channel power and angular distribution. Six representative indoor surfaces are characterized, revealing that intrinsic structural inhomogeneity - particularly the quasi-periodic earlywood-latewood arrangement in pine wood - induces measurable angular scattering whose dominant lobes and angular shifts are reproduced by a beam-propagation modeling (BPM) framework. Material-covered surface configurations are further investigated, demonstrating that thin dielectric covering layers can substantially modify reflection characteristics through thickness- and frequency- dependent thin-film interference effects. Wide-angle bistatic measurements in a conference room show that folded curtains broaden the measured angular distribution of detectable received power. These findings suggest that structure-induced surface scattering mechanisms may provide scattering-assisted propagation opportunities for indoor non-line-of-sight THz scenarios.

physics.app-ph↗

Thermoelectric properties of metal-semiconductor percolation composites

We analyze the thermoelectric response of composite materials comprising homogeneous semiconductor hosts with randomly distributed metallic inclusions. We demonstrate that the properties of such materials are strongly affected by the percolation transition (with background conductivity). We show that in the vicinity of the percolation threshold, the power factor and the thermoelectric figure of merit strongly depend on both the concentration and arrangement of inclusions. Finally, we identify promising regimes for enhancing the power factor in realistic composites.

physics.app-ph↗