arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2611.06347

Interference-Aware Instantaneous Frequency and Amplitude Estimator for Multicomponent Signals

Sylvain Meignen·Kévin Polisano
View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, we introduce a novel instantaneous frequency (IF) estimator for multicomponent signals (MCSs), that takes into account the potential presence of interference in the time-frequency (TF) plane. Our approach optimizes the spectrogram window locally in the TF domain to enhance signal representation, adapting to isolated or interfering modes. This optimization leads to the definition of candidate IF points, which are then gathered together using a novel ridge detection approach, and, finally, IF estimates are obtained by adapting a spline fitting procedure to the potential presence of crossing modes. An extra benefit of the proposed technique is that it also gives access to estimates of the instantaneous amplitudes of the modes, and thus to that of the ideal TF signature of the signal. The proposed IF estimation method compares favorably with state-of-the-art techniques especially on MCSs containing modes with very different frequency modulation.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sylvain Meignen, Kévin Polisano. 2026-11-04. Interference-Aware Instantaneous Frequency and Amplitude Estimator for Multicomponent Signals. https://arxiv.org/abs/2611.06347

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

DDA-Net: Accurate TDD Channel Estimation via Deep Unfolding the Doppler-Delay-Angle Representation of Channel Signals

In TDD massive MIMO systems, channel estimation under sparse frequency-hopping pilots is challenging: each snapshot captures only one narrow pilot block that hops across frequency, with tens of milliseconds between adjacent snapshots. Finite-window leakage and off-grid effects weaken the ideal Doppler-delay-angle (DDA) sparsity, limiting both classical sparse recovery and purely data-driven approaches lacking an explicit structured transform-domain model. We propose DDA-Net, a model-driven 3D deep unfolding network for joint multi-snapshot channel state reconstruction. DDA-Net integrates an ADMM-based formulation with a closed-form data-consistency update that avoids tensor inversion, a lightweight Doppler-domain learned prior, and delay oversampling to mitigate basis mismatch. It consistently outperforms strong baselines across three channel settings from 3GPP TR 38.901: UMa-NLOS, UMi-NLOS, and CDL-B. Ablations confirm that window-level 3D processing and explicit Doppler modeling yield target-dependent improvements. With minimal target-domain fine-tuning, the UMa-pretrained model surpasses both its zero-shot version and counterparts trained from scratch with the same number of target-domain samples. The Doppler-domain design proves consistently superior to its time-domain equivalent, with a wider margin after fine-tuning. These results demonstrate that combining exact physical data consistency with a learned DDA-domain prior is an effective and sample-efficient approach to channel state acquisition under sparse frequency-hopping pilots.

eess.SP↗
arXiv2026

Optimal symmetric low-rank BD-RIS configuration maximizing the determinant of a MIMO link

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) significantly improve wireless performance by allowing tunable interconnections among elements, but their design in multiple-input multiple-output (MIMO) systems has so far relied on complex iterative algorithms or suboptimal approximations. This work introduces a simple yet powerful approach: instead of directly maximizing the achievable rate, we maximize the absolute value of the determinant of the equivalent MIMO channel. We derive a closed-form symmetric unitary scattering matrix whose rank is exactly twice the channel's degrees of freedom ($2r$). Remarkably, this low-rank solution achieves the same determinant value as the optimal unitary BD-RIS. Using log-majorization theory, we prove that the rate loss relative to the optimal unitary BD-RIS vanishes at high signal-to-noise ratio (SNR) or when the number of BD-RIS elements becomes large. Moreover, the proposed solution can be perfectly implemented using a $q$-stem BD-RIS architecture with only $q=2r-1$ stems, requiring a minimum number of reconfigurable circuits. The resulting Max-Det solution is orders of magnitude faster to compute than existing iterative methods while achieving near-optimal rates in practical scenarios. This makes high-performance BD-RIS deployment feasible even with large surfaces and limited computational resources.

eess.SP↗
arXiv2026

Constrained Tensor Decomposition-Based Target Sensing for Sparse Non-Uniform Array-Enabled AFDM ISAC Systems

Sparse non-uniform array-enabled affine frequency division multiplexing (AFDM) is a promising candidate for integrated sensing and communication (ISAC), while its performance critically depends on accurate target parameter estimation. In this paper, we propose a constrained tensor decomposition-based sensing framework for delay, Doppler, and angle estimation. Specifically, a manifold-constrained alternating least squares algorithm is developed by exploiting the sparse array geometry structure, enabling robust factor matrix extraction and direct angle estimation. In addition, we analyze the uniqueness condition of the tensor decomposition. From the decomposed factor matrices, delays and Doppler shifts are coarsely estimated by pulse compression, and refined by an iterative one dimensional golden-section search.Moreover, the Cramér-Rao bound (CRB) is derived to characterize the fundamental performance limit of the considered estimation problem. Finally, simulation results validate the effectiveness of the proposed estimation algorithm.

eess.SP↗