arXiv Science⌕ Search

arXiv · 2611.01442

Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization

Abstract

This paper studies dual path following for a quadrotor carrying a three-degree-of-freedom arm. The center of mass of the combined system must follow a vehicle path and the end effector must follow a second path, while the arm respects its joint limits and avoids its singular postures. The vehicle and the arm are mechanically coupled, so one controller must handle both paths. With the center of mass and the end-effector path coordinates as outputs, and a dynamic extension of the thrust, the system admits a normal form without internal dynamics. We characterize the states where this normal form fails. We formulate the transverse feedback linearizing controller as a quadratic program that relaxes only the speed of the end effector along its path and imposes safety and actuator limits as inequality constraints. The program reduces to a scalar problem with a closed-form solution. If it remains strictly feasible for all time, the feedback is locally Lipschitz, both paths are invariant and attractive, and every constraint holds. In the physics engine Drake, the controller resolves a conflict between the two speed references by slowing the end effector while both paths remain invariant. By contrast, a cascade with a safety filter leaves both paths. Code and animations are available at https://gradslab.github.io/am_dual_pf-/

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hamza Tariq, Adeel Akhtar. 2026-11-01. Dual Path Following for an Aerial Manipulator Under State and Input Constraints via Transverse Feedback Linearization. https://arxiv.org/abs/2611.01442

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Design of an Underwater Vehicle With Orientation-Adjustable Thrusters and Adaptive Tracking Control

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.

cs.RO↗

FlowDrive: moderated flow matching with data balancing for trajectory planning

Learning-based planners are sensitive to the long-tailed distribution of driving data. Common maneuvers dominate datasets, while dangerous or rare scenarios are sparse. This imbalance can bias models toward the frequent cases and degrade performance on critical scenarios. To tackle this problem, we compare balancing strategies for sampling training data and find reweighting by trajectory pattern an effective approach. We then present FlowDrive, a flow-matching trajectory planner that learns a conditional rectified flow to map noise directly to trajectory distributions with few flow-matching steps. We further introduce moderated, in-the-loop guidance that injects small perturbation between flow steps to systematically increase trajectory diversity while remaining scene-consistent. On nuPlan and the interaction-focused interPlan benchmarks, FlowDrive achieves state-of-the-art results among learning-based planners and approaches methods with rule-based refinements. After adding moderated guidance and light post-processing (FlowDrive*), it achieves overall state-of-the-art performance across nearly all benchmark splits. Our code is available at https://github.com/einsteinguang/flow_drive_planner.

cs.RO↗

DexCanvas: Bridging Human Demonstrations and Robot Learning for Dexterous Manipulation

A dexterous hand succeeds or fails through contact, yet every scalable record of human manipulation (video, vision-based hand tracking, motion capture) observes how the hand moves and misses how it pushes. We present DexCanvas, a hybrid real-synthetic dataset of 7,000 hours of dexterous hand-object interaction with per-frame contact points and contact forces, grown from 70 hours of optical motion capture that spans 21 manipulation types, from power and precision grasps to in-hand manipulation. The forces come from a real-to-sim pipeline: one reinforcement learning (RL) policy, conditioned on object geometry and manipulation type, drives an actuated MANO hand in physics simulation to reproduce each captured object trajectory, and the simulator measures the contacts that produce the reproduced motion. The policy reproduces 87.5% of the demonstrations and still succeeds on 80.9% of rollouts from perturbed initial object poses; these perturbed rollouts expand the 70 captured hours a hundredfold. On six YCB objects absent from the capture set it succeeds 72.5% of the time. The contact channels make better policies: a Diffusion Policy that observes DexCanvas contact features succeeds 82.2% of the time, against 67.5% without them, over 18,522 trials. Contact-driven retargeting carries the same demonstrations to two dexterous robot hands, where the RL stage again produces stable rollouts. A first release of 111,857 force-annotated trajectories is publicly available on Hugging Face.

cs.RO↗