arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.41857

When the Simulator Fails, Not the Policy: Auditing Contact Artifacts in Simulated Robot Benchmarks

Alex Zhou·Junhao Wu·Xueyang Zhou·Yixiao Huo·Hongcheng Gao·Di Zhu·Zhenghao Zhang·Yongchao Chen
View original source ↗Read source document ↗Export metadata ↓

Abstract

Simulation benchmarks score robot policies by success rate, and every failed episode counts against the policy. Many of these failures are the simulator's fault, not the policy's; we find the cause and fix it. Testing a vision language action model and a world action model in simulation, we find that the policy often places the object and the simulator then ejects it, and that the benchmark's own scripted demonstrations fail the same way. We present SimuGuard, an auditing plugin for LIBERO, RoboTwin, RoboCasa and RoboDojo. It leaves the evaluation unchanged. At every physics step, it records the state and flags an object that starts moving at a contact faster than the robot's contact or gravity account for. It replays a recorded episode bit for bit, and it reruns the episode with one simulation parameter changed. With it we trace these episodes on RoboTwin to the collision detection of the physics engine: for geometry one to two centimeters apart, the engine reports a penetration of about two centimeters, and the solver throws the object out at several meters per second. The cause is one constant: the distance algorithm discards triangles below a fixed area threshold, which valid triangles fall below at the centimeter scale. With that constant changed and nothing else, episodes with an artifact fall from 12 in 100 to none, and the success rate on five container tasks rises from 89% to 98%. Success rates in simulation thus count failures that the simulator causes. Benchmarks on PhysX 5.3.1 or earlier should rerun in a repaired engine. Where the engine cannot change, they should report the success rate together with the range it spans when every flagged episode fails or passes: 75.8% to 98.5% around a reported 83.1% for LingBot-VA.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alex Zhou, Junhao Wu, Xueyang Zhou, Yixiao Huo, Hongcheng Gao, Di Zhu, Zhenghao Zhang, Yongchao Chen. 2026-10-30. When the Simulator Fails, Not the Policy: Auditing Contact Artifacts in Simulated Robot Benchmarks. https://arxiv.org/abs/2610.41857

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Design of an Underwater Vehicle With Orientation-Adjustable Thrusters and Adaptive Tracking Control

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.

cs.RO↗
arXiv2026

FlowDrive: moderated flow matching with data balancing for trajectory planning

Learning-based planners are sensitive to the long-tailed distribution of driving data. Common maneuvers dominate datasets, while dangerous or rare scenarios are sparse. This imbalance can bias models toward the frequent cases and degrade performance on critical scenarios. To tackle this problem, we compare balancing strategies for sampling training data and find reweighting by trajectory pattern an effective approach. We then present FlowDrive, a flow-matching trajectory planner that learns a conditional rectified flow to map noise directly to trajectory distributions with few flow-matching steps. We further introduce moderated, in-the-loop guidance that injects small perturbation between flow steps to systematically increase trajectory diversity while remaining scene-consistent. On nuPlan and the interaction-focused interPlan benchmarks, FlowDrive achieves state-of-the-art results among learning-based planners and approaches methods with rule-based refinements. After adding moderated guidance and light post-processing (FlowDrive*), it achieves overall state-of-the-art performance across nearly all benchmark splits. Our code is available at https://github.com/einsteinguang/flow_drive_planner.

cs.RO↗
arXiv2026

DexCanvas: Bridging Human Demonstrations and Robot Learning for Dexterous Manipulation

A dexterous hand succeeds or fails through contact, yet every scalable record of human manipulation (video, vision-based hand tracking, motion capture) observes how the hand moves and misses how it pushes. We present DexCanvas, a hybrid real-synthetic dataset of 7,000 hours of dexterous hand-object interaction with per-frame contact points and contact forces, grown from 70 hours of optical motion capture that spans 21 manipulation types, from power and precision grasps to in-hand manipulation. The forces come from a real-to-sim pipeline: one reinforcement learning (RL) policy, conditioned on object geometry and manipulation type, drives an actuated MANO hand in physics simulation to reproduce each captured object trajectory, and the simulator measures the contacts that produce the reproduced motion. The policy reproduces 87.5% of the demonstrations and still succeeds on 80.9% of rollouts from perturbed initial object poses; these perturbed rollouts expand the 70 captured hours a hundredfold. On six YCB objects absent from the capture set it succeeds 72.5% of the time. The contact channels make better policies: a Diffusion Policy that observes DexCanvas contact features succeeds 82.2% of the time, against 67.5% without them, over 18,522 trials. Contact-driven retargeting carries the same demonstrations to two dexterous robot hands, where the RL stage again produces stable rollouts. A first release of 111,857 force-annotated trajectories is publicly available on Hugging Face.

cs.RO↗