arXiv Science⌕ Search

arXiv · 2610.39119

CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments

Abstract

As a representative form of embodied robotic interaction, aerial grasping requires close coordination between the aerial platform and manipulator. Most existing systems perform aerial grasping with static or slowly moving targets under fixed scenarios. Dynamic and precise grasping across different conditions introduces additional challenges, including target motion, localization drift, dynamic coupling, and external disturbances. In this work, we present CAPTURER, a dexterous aerial manipulator for centimeter-level grasping across diverse environments. To achieve the challenging goal, we first develop an onboard perception system for state estimation and target detection. Drift correction and global pose transformation are introduced to improve target localization during flight. A cooperative motion planner is proposed to coordinate the mobility of the aerial platform with the dexterity of the manipulator according to the relative target state. To maintain grasping accuracy under disturbances, we design a disturbance-rejection controller to compensate for dynamic coupling, model uncertainty, and external disturbances. The capability of CAPTURER is validated through indoor and outdoor experiments with both static and moving targets. The results demonstrate that CAPTURER achieves centimeter-level grasping accuracy for a marker pen measuring only 1.5 cm in diameter at flight speeds exceeding 1.5 m/s.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Meng Wang, Jindou Jia, Sicheng Zhou, Zeshuai Chen, Kexin Guo, Xiang Yu, Lei Guo. 2026-10-29. CAPTURER: A Dexterous Aerial Manipulator for Dynamic and Precise Grasping across Diverse Environments. https://arxiv.org/abs/2610.39119

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Design of an Underwater Vehicle With Orientation-Adjustable Thrusters and Adaptive Tracking Control

Unmanned underwater vehicles (UUVs) are essential for marine exploration and research. However, conventional designs often struggle with limited maneuverability in complex and dynamic underwater environments. This paper presents an orientation-adjustable thruster UUV (OAT-UUV) with vector thrusters, enabling full six-degree-of-freedom (6-DOF) motion. and composite maneuvers. To overcome challenges associated with uncertain model parameters and environmental disturbances, a vision-based tracking control system based on a novel feedforward adaptive model predictive controller (FF-AMPC) is proposed to achieve robust object tracking, which integrates realtime state feedback with adaptive parameter updating. Extensive experiments, including closed-loop tracking and composite motion tests in real-world environment, have been conducted. The obtained results demonstrate that the orientation-adjustable propulsion design significantly improves the underwater maneuverability, while the FF-AMPC controller achieves a 49.1% hovering improvement compared to conventional controller.

cs.RO↗

FlowDrive: moderated flow matching with data balancing for trajectory planning

Learning-based planners are sensitive to the long-tailed distribution of driving data. Common maneuvers dominate datasets, while dangerous or rare scenarios are sparse. This imbalance can bias models toward the frequent cases and degrade performance on critical scenarios. To tackle this problem, we compare balancing strategies for sampling training data and find reweighting by trajectory pattern an effective approach. We then present FlowDrive, a flow-matching trajectory planner that learns a conditional rectified flow to map noise directly to trajectory distributions with few flow-matching steps. We further introduce moderated, in-the-loop guidance that injects small perturbation between flow steps to systematically increase trajectory diversity while remaining scene-consistent. On nuPlan and the interaction-focused interPlan benchmarks, FlowDrive achieves state-of-the-art results among learning-based planners and approaches methods with rule-based refinements. After adding moderated guidance and light post-processing (FlowDrive*), it achieves overall state-of-the-art performance across nearly all benchmark splits. Our code is available at https://github.com/einsteinguang/flow_drive_planner.

cs.RO↗

DexCanvas: Bridging Human Demonstrations and Robot Learning for Dexterous Manipulation

A dexterous hand succeeds or fails through contact, yet every scalable record of human manipulation (video, vision-based hand tracking, motion capture) observes how the hand moves and misses how it pushes. We present DexCanvas, a hybrid real-synthetic dataset of 7,000 hours of dexterous hand-object interaction with per-frame contact points and contact forces, grown from 70 hours of optical motion capture that spans 21 manipulation types, from power and precision grasps to in-hand manipulation. The forces come from a real-to-sim pipeline: one reinforcement learning (RL) policy, conditioned on object geometry and manipulation type, drives an actuated MANO hand in physics simulation to reproduce each captured object trajectory, and the simulator measures the contacts that produce the reproduced motion. The policy reproduces 87.5% of the demonstrations and still succeeds on 80.9% of rollouts from perturbed initial object poses; these perturbed rollouts expand the 70 captured hours a hundredfold. On six YCB objects absent from the capture set it succeeds 72.5% of the time. The contact channels make better policies: a Diffusion Policy that observes DexCanvas contact features succeeds 82.2% of the time, against 67.5% without them, over 18,522 trials. Contact-driven retargeting carries the same demonstrations to two dexterous robot hands, where the RL stage again produces stable rollouts. A first release of 111,857 force-annotated trajectories is publicly available on Hugging Face.

cs.RO↗