arXiv Science⌕ Search

arXiv · 2610.38794

Joint Antenna Position and Beamforming Optimization for Movable Antenna Enabled Near-Field ISAC Imaging

Abstract

Near-field (NF) integrated sensing and communication (ISAC) systems enable simultaneous two-dimensional (2D) radar imaging and multi-user downlink communication. However, fixed-position antenna arrays can exhibit high sidelobes in the point spread function (PSF), which degrade imaging performance and cause ghost-target artifacts. Movable antennas (MAs) offer additional spatial degrees of freedom to suppress these sidelobes while meeting communication requirements, without increasing the number of antenna elements. In this paper, we investigate MA-enabled NF ISAC by jointly optimizing the transmit and receive antenna positions and the transmit beamforming to minimize a weighted sum of the integrated sidelobe level (ISL) and peak sidelobe level (PSL) of the 2D PSF, subject to communication-rate, illumination-power, transmit-power, and antenna-placement constraints. To tackle the resulting non-convex problem, we propose a hybrid alternating optimization (AO) framework that combines particle swarm optimization with a genetic algorithm. Our numerical results demonstrate that the proposed scheme achieves the lowest ISL among the considered array configurations and reduces the PSL by at least 5 dB compared with the benchmarks. The optimized array is further shown to resolve two closely spaced targets whose reflectivities differ by 6dB, outperforming random, Mills Cross, and rectangular arrays while satisfying the imposed minimum user-throughput requirements.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Luis Ebner, Alireza Navi, Mohamed-Amine Lahmeri, Sebastian Lotter, Lutz Lampe, Robert Schober. 2026-10-28. Joint Antenna Position and Beamforming Optimization for Movable Antenna Enabled Near-Field ISAC Imaging. https://arxiv.org/abs/2610.38794

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

DDA-Net: Accurate TDD Channel Estimation via Deep Unfolding the Doppler-Delay-Angle Representation of Channel Signals

In TDD massive MIMO systems, channel estimation under sparse frequency-hopping pilots is challenging: each snapshot captures only one narrow pilot block that hops across frequency, with tens of milliseconds between adjacent snapshots. Finite-window leakage and off-grid effects weaken the ideal Doppler-delay-angle (DDA) sparsity, limiting both classical sparse recovery and purely data-driven approaches lacking an explicit structured transform-domain model. We propose DDA-Net, a model-driven 3D deep unfolding network for joint multi-snapshot channel state reconstruction. DDA-Net integrates an ADMM-based formulation with a closed-form data-consistency update that avoids tensor inversion, a lightweight Doppler-domain learned prior, and delay oversampling to mitigate basis mismatch. It consistently outperforms strong baselines across three channel settings from 3GPP TR 38.901: UMa-NLOS, UMi-NLOS, and CDL-B. Ablations confirm that window-level 3D processing and explicit Doppler modeling yield target-dependent improvements. With minimal target-domain fine-tuning, the UMa-pretrained model surpasses both its zero-shot version and counterparts trained from scratch with the same number of target-domain samples. The Doppler-domain design proves consistently superior to its time-domain equivalent, with a wider margin after fine-tuning. These results demonstrate that combining exact physical data consistency with a learned DDA-domain prior is an effective and sample-efficient approach to channel state acquisition under sparse frequency-hopping pilots.

eess.SP↗

Optimal symmetric low-rank BD-RIS configuration maximizing the determinant of a MIMO link

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) significantly improve wireless performance by allowing tunable interconnections among elements, but their design in multiple-input multiple-output (MIMO) systems has so far relied on complex iterative algorithms or suboptimal approximations. This work introduces a simple yet powerful approach: instead of directly maximizing the achievable rate, we maximize the absolute value of the determinant of the equivalent MIMO channel. We derive a closed-form symmetric unitary scattering matrix whose rank is exactly twice the channel's degrees of freedom ($2r$). Remarkably, this low-rank solution achieves the same determinant value as the optimal unitary BD-RIS. Using log-majorization theory, we prove that the rate loss relative to the optimal unitary BD-RIS vanishes at high signal-to-noise ratio (SNR) or when the number of BD-RIS elements becomes large. Moreover, the proposed solution can be perfectly implemented using a $q$-stem BD-RIS architecture with only $q=2r-1$ stems, requiring a minimum number of reconfigurable circuits. The resulting Max-Det solution is orders of magnitude faster to compute than existing iterative methods while achieving near-optimal rates in practical scenarios. This makes high-performance BD-RIS deployment feasible even with large surfaces and limited computational resources.

eess.SP↗

Constrained Tensor Decomposition-Based Target Sensing for Sparse Non-Uniform Array-Enabled AFDM ISAC Systems

Sparse non-uniform array-enabled affine frequency division multiplexing (AFDM) is a promising candidate for integrated sensing and communication (ISAC), while its performance critically depends on accurate target parameter estimation. In this paper, we propose a constrained tensor decomposition-based sensing framework for delay, Doppler, and angle estimation. Specifically, a manifold-constrained alternating least squares algorithm is developed by exploiting the sparse array geometry structure, enabling robust factor matrix extraction and direct angle estimation. In addition, we analyze the uniqueness condition of the tensor decomposition. From the decomposed factor matrices, delays and Doppler shifts are coarsely estimated by pulse compression, and refined by an iterative one dimensional golden-section search.Moreover, the Cramér-Rao bound (CRB) is derived to characterize the fundamental performance limit of the considered estimation problem. Finally, simulation results validate the effectiveness of the proposed estimation algorithm.

eess.SP↗