arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.38094

PyPSA-Libya: An Open-Source Energy System Model for National Decarbonization and Hydrogen Export Pathways

Mohamed Abuella
View original source ↗Read source document ↗Export metadata ↓

Abstract

Libya possesses significant renewable energy potential that remains largely untapped. This paper presents PyPSA-Libya, a national-scale model built on the PyPSA-Earth framework, designed to explore optimal transition pathways for the Libyan power sector. We present two primary studies: (1) an electricity-only capacity expansion analysis comparing a zero-emission constraint against an unconstrained baseline at 36-cluster resolution, and (2) a sector-coupled hydrogen export study evaluating the levelized cost of exporting 70 TWh/year of hydrogen to Europe under three technological scenarios and a 100 EUR/tonne CO2 carbon tax regime. Results indicate that while solar PV dominates the domestic capacity mix, integration of hydrogen production significantly alters grid storage requirements. Furthermore, under carbon pricing, steam methane reforming with carbon capture (SMR-CC) frequently out-competes pure green electrolysis, establishing a lower-cost compliance pathway for cross-border export. The model, data, and configuration files are released under an open-source license to support transparent energy planning in Libya.

Explore related subjects

cs.CEcs.SYeess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mohamed Abuella. 2026-10-28. PyPSA-Libya: An Open-Source Energy System Model for National Decarbonization and Hydrogen Export Pathways. https://arxiv.org/abs/2610.38094

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Calculation and rejection diverge in language models tested at known mechanical limits

When a language model returns engineering quantities with the status "solved", software that trusts it passes them on, even when the requested design is physically impossible. Such failures could reflect poor calculation, how the answer is requested, or a failure to judge feasibility. We set beam loads and disk speeds at known percentages above or below plastic collapse or burst, measured each model's limit calculation separately and tested 12 models in 4,860 calls, including follow-up experiments on new designs. We find that a model can recognize an impossible design when asked only whether it is feasible, yet accept the same design, reporting "solved", when asked for a full answer. Three models accepted beams 10 to 30% beyond collapse despite precise limit calculations in separate questions, and many accepted replies stated the violation. Asked only about feasibility, Opus 5 and Gemini 3.8 Flash rejected every impossible new design they were given, including those accepted in full answers, without false alarms. Rewording when to decline or changing the answer format raised rejection on the original beams, but not consistently on new designs. Software and benchmarks using a model's status should test feasibility judgment and full-answer rejection separately, and report the exact prompt.

cs.CE↗
arXiv2026

Algebraic Operations on Tensor Trains

The tensor train (TT) model is widely used to approximate high-dimensional tensors, enabling efficient handling of data that may exceed available memory. TT helps address the curse of dimensionality in applications such as system identification and dynamic programming. In some applications, TT is known as a ``matrix product state" (MPS). The last product is also known under the acronym MPO--MPS. The proposed algorithms achieve an improved trade-off between computational efficiency and accuracy compared to state-of-the-art methods.

cs.CE↗
arXiv2026

Advancing global crop simulations with differentiable modelling

Global gridded crop models (GGCMs) are crucial for assessing the performance of food producing systems, for example under climate change or their contribution to environmental challenges. However, systematic calibration of their parameters remains a long-standing challenge. Persisting uncertainties in these parameters propagate into future crop projections, thereby affecting and potentially biasing food security assessments. Here we present a fully process-based differentiable GGCM implementation that offers a fundamentally new approach to parameter calibration, uncertainty quantification, yield loss attribution, and management optimization. Using automatic differentiation, we optimize selected model parameters against site-scale carbon and water flux observations, reducing normalized root-mean-square errors at held-out sites by 24.8-36.2% compared to the default state-of-the-art model. Without calibration against yield data, the optimized model better captures detrended yield anomalies across 61.2-64.3% of global crop area and reduces low-yield errors by 3.4-43.5% for wheat, rice, maize and soybean. It also ranks among the best performers in comparison with GGCMI Phase 3 models. Future simulations show that calibration reduces the projected end-of-century rice production increase from 55.1% to 22.1% under SSP5-8.5. Parameter ensembles further reveal that parameterizations with comparable historical skill can produce markedly different future production responses. Beyond calibration, differentiability enables the attribution of crop losses under extreme events and supports the design of adaptive crop management strategies. For the 2018 European drought, we identify spring heat and water limitation as major contributors to wheat yield losses and develop more effective irrigation strategies for mitigating simulated regional yield losses.

cs.CE↗