arXiv Science⌕ Search

arXiv · 2610.37535

Predict the Swing, Match the Speed: Robotic Pipe Stabbing With Learned Stereo Vision and Residual Reinforcement Learning

Abstract

A joint of pipe run into the hole swings from the elevator over the well and strikes a fixed stabbing guide at whatever speed the swing has. StabBot, a robotic stabbing system, predicts the swing and meets the pipe at its own speed. A pendulum Kalman filter tuned from the pipe tally tracks the joint in stereo images. A six-axis arm with an open V-shaped roller head closes in at matched velocity, confirms the last millimetres by touch, aims the pin over the box when the elevator hangs off centre, and follows the block down with lateral compliance. A ResNet-18 keypoint network locates the pipe, pin nose and box mouth in 3-D, and a residual reinforcement-learning policy refines the capture. On 200 paired random jobs with nine sizes from 2-3/8-in. tubing to 20-in. casing, StabBot seated every joint with the pipe touching only rollers, against 74% for a conventional fixed guide. Median contact speed fell from 18.4 to 2.3 cm/s and median peak head-pipe force from 11.3 to 1.4 kN, and the force was lower in all 200 jobs (Wilcoxon $p < 10^{-30}$). The network locates the pipe with 0.4-mm median error in 2.3 ms per stereo pair. With the network in the loop, success stayed at 100% under 20 mm of added noise, 300-ms delay, 85% frame loss, 20-mm calibration offset, 20-cm elevator offset and 40-cm swings. All results come from a 1:4 Froude-scaled MuJoCo model and are reported at full scale.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mohamed Ashraf Mostafa, Taher El-Fakharany, Samir Khaled. 2026-10-27. Predict the Swing, Match the Speed: Robotic Pipe Stabbing With Learned Stereo Vision and Residual Reinforcement Learning. https://arxiv.org/abs/2610.37535

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Investigating Active Sampling for Hardness Classification with Vision-Based Tactile Sensors

Hardness is one of the most important object properties that humans and robots perceive through touch. This paper investigates active sampling strategies for sample-efficient hardness classification with vision-based tactile sensors (VBTS), using information-theoretic measures of model uncertainty. We evaluated three probabilistic classifier models and two active sampling strategies and a random sampling baseline on a hardness classification task, with our own dataset of VBTS samples collected by a robot and a previously published dataset. In addition, we conducted a human study on the hardness classification task with the same objects as our dataset. Our findings indicate that the active sampling approaches, driven by variance and entropy as measures of model uncertainty, perform best with accuracy reaching 90%, compared to human accuracy of 48%, demonstrating the effectiveness of using VBTS for hardness classification. More information can be found at: https://fheller1.github.io/ActiveHardness

cs.RO↗

CLEAR-IR: Clarity-Enhanced Active Reconstruction of Infrared Imagery

This paper presents CLEAR-IR (Clarity Enhanced Active Reconstruction of Infrared Imagery), a novel framework for enabling robust robotic perception in dark environments using active infrared (IR) sensing. IR streams are less susceptible to noise than RGB in low light conditions but are dominated by structured light emitter patterns that hinder high level tasks such as object detection, tracking, and localisation. CLEAR-IR addresses this by reconstructing clean, RGB styled images from emitter populated IR inputs using a dual stream architecture inspired by DeepMAO, enabling standard RGB trained vision pipelines to operate without visible light. Evaluation across object detection, ArUco marker detection, and visual SLAM demonstrates that CLEAR-IR produces reliable perception in conditions ranging from well lit to completely dark, where passive RGB based enhancement methods fail entirely due to the physical absence of sensor signal.

cs.RO↗

Learning to Feel the Future: DreamTacVLA for Contact-Rich Manipulation

Vision-Language-Action (VLA) models have shown remarkable generalization by mapping web-scale knowledge to robotic control, yet they remain blind to physical contact. Consequently, they struggle with contact-rich manipulation tasks that require reasoning about force, texture, and slip. While some approaches incorporate low-dimensional tactile signals, they fail to capture the high-resolution dynamics essential for such interactions. To address this limitation, we introduce DreamTacVLA, a framework that grounds VLA models in contact physics by learning to feel the future. Our model adopts a hierarchical perception scheme in which high-resolution tactile images serve as micro-vision inputs coupled with wrist-camera local vision and third-person macro vision. To reconcile these multi-scale sensory streams, we first train a unified policy with a Hierarchical Spatial Alignment (HSA) loss that aligns tactile tokens with their spatial counterparts in the wrist and third-person views. To further deepen the model's understanding of fine-grained contact dynamics, we finetune the system with a tactile world model that predicts future tactile signals. To mitigate tactile data scarcity and the wear-prone nature of tactile sensors, we construct a hybrid large-scale dataset sourced from both high-fidelity digital twin and real-world experiments. By anticipating upcoming tactile states, DreamTacVLA acquires a rich model of contact physics and conditions its actions on both real observations and imagined consequences. Across contact-rich manipulation tasks, it outperforms state-of-the-art VLA baselines, achieving up to 95% success, highlighting the importance of understanding physical contact for robust, touch-aware robotic agents.

cs.RO↗