arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.36426

Electric Vehicle Scheduling and Carbon-Aware Energy Dispatch for Charging Stations

Fulong Yao·Yiming Xu·Maurizio Albano·Liana Cipcigan·Naeima Hamed·Shangyin Weng·Omer Rana
View original source ↗Read source document ↗Export metadata ↓

Abstract

Electric vehicle (EV) charging stations integrating photovoltaic (PV) generation, battery storage, and bidirectional grid exchange must coordinate access to limited chargers with energy supply while considering both energy cost and carbon emissions. This paper proposes a solver-free greedy heuristic (SFGH) for dynamic vehicle scheduling (VS) and a twin delayed deep deterministic policy gradient (TD3) controller for carbon-aware energy dispatch (ED). SFGH assigns EVs according to reductions in service delays, and TD3 controls battery operation to balance energy costs and carbon emissions while meeting the resulting charging demand. The model allows both PV and battery exports, accounting for export revenue and carbon credits. Simulations on year-long case studies show that SFGH--TD3 achieves the lowest accumulated service delay, energy cost, and carbon emissions among the evaluated heuristic and multi-agent deep reinforcement learning (DRL) configurations.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fulong Yao, Yiming Xu, Maurizio Albano, Liana Cipcigan, Naeima Hamed, Shangyin Weng, Omer Rana. 2026-10-27. Electric Vehicle Scheduling and Carbon-Aware Energy Dispatch for Charging Stations. https://arxiv.org/abs/2610.36426

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Phase-Coordinated Model Predictive Control for AI Training Power Smoothing

Periodic power fluctuations from artificial intelligence (AI) training workloads can excite oscillations in power systems. This paper proposes a model predictive control (MPC) framework that exploits short start-time delays to mitigate power fluctuations at the computing source. By coordinating the relative phases of independent training jobs, the proposed method reduces the superposition of oscillatory power components without interrupting running jobs or requiring additional power-smoothing hardware. To obtain a tractable optimization formulation, cosine and sine projections are employed to quantify the dominant oscillatory power components, and their magnitudes are used to construct a convex quadratic power-smoothing objective. The receding-horizon framework updates launch decisions as new workload information becomes available while maintaining scheduling feasibility under limited computation time. Numerical results demonstrate reductions of 74.39\% in mean-square power fluctuations within the 0.2--2-Hz band and 46.6\% in power standard deviation, with an average launch delay of 2.188~s. All launch deadlines are satisfied, and the maximum end-to-end computation time is 0.390~s, below the 0.50-s MPC update period.

eess.SY↗
arXiv2026

A Topology-Aware Neural Network for Fault Location With Missing Measurements

This paper proposes a topology-aware neural network-based fault locator (TANFL) for radial distribution feeders, which uses voltage and current phasors obtained after the decay of fault induced transients, as well as feeder connection relationships and line parameters, as inputs. The shared bus encoder, bus readout module, and gated line readout module work together to identify the faulty bus or line and estimate the continuous fault location on the selected line. During training, explicit missing data indicators and random bus data block masking are introduced, enabling a single trained model to handle both complete measurement sets and scenarios where any permitted bus measurement device fails. On the IEEE 15 bus feeder, this paper compares TANFL with a conventional multilayer perceptron (MLP) and the formula-based localization method under identical data, measurement availability scenarios, and evaluation metrics. On the test partition, TANFL outperforms the conventional MLP; with complete measurements, its line fault location performance is slightly lower than that of the formula-based method, but in the average results for scenarios with one missing bus measurement block, its accuracy is the highest among the three methods at a 5% tolerance.

eess.SY↗
arXiv2026

Thermal-Mass Coupled Modeling and Optimal Scheduling of Aluminum Smelting Loads for Safe Demand Response Participation

Aluminum smelting loads (ASLs) offer substantial flexibility potential, yet their actual participation in demand response remains conservative owing to the risk of operational failures. Power adjustments disturb the electrolyte temperature and superheat, which may lead to electrolyte freeze-out or yield loss. Existing ASL demand response methods often rely on oversimplified dynamic models of the electrolytic cell's thermal behavior, such as linear models and the Equivalent Thermal Parameter (ETP) model, which may either violate temperature constraints or underestimate the available flexibility. To address this limitation, this paper proposes a Thermal-Mass Coupled (TMC) dynamic model. The model captures the essential physical mechanisms of electrolytic cells, including alumina feed dynamics, ledge phase-change dynamics, and state-dependent current efficiency. The resulting nonlinear relations are reformulated into a tractable mixed-integer linear programming (MILP) model using Taylor approximations and McCormick-envelope reformulations. In the illustrative PBDR and IBDR case studies, the nonlinear reference-model assessment shows that the TMC model achieves net economic improvements 122.4% and 325.1% higher, respectively, than the ETP model. The proposed framework can therefore support deeper demand response participation by aluminum smelters while explicitly assessing adherence to operational safety constraints.

eess.SY↗