arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.30498

CARS: a centerline-anchored attention surrogate for coronary blood flow on skeleton-generated lumen geometries

Reza Akbarian Bafghi·Sukirt Thakur·Maziar Raissi
View original source ↗Read source document ↗Export metadata ↓

Abstract

When the parameter of a PDE surrogate is the flow domain itself, the key/value set of an attention model must encode that domain. We present CARS (Coronary Artery Rapid Surrogate), a learned surrogate for the finite-volume solution map of the steady incompressible Navier-Stokes equations on coronary lumens built from image-derived centerlines. CARS maps a centerline with per-point lumen radius and a scalar inlet flow rate to pressure and velocity at arbitrary query points. The attention focal set is the case's own centerline, so geometry fusion costs $O(N n_f)$ rather than $O(N^2)$ in the number of evaluation points. Trained per territory on $2{,}700$ OpenFOAM solutions with synthetic focal lesions, CARS reaches relative $\ell_2$ errors of $0.120/0.149$ (pressure/velocity) on left-coronary and $0.063/0.119$ on right-coronary test sets, in $87$~ms per case against a solver wall-clock of $572$-$1{,}063$~s. It outperforms four parameter-matched neural operators, and accuracy saturates eightfold below the operating focal count. Fractional flow reserve derived from the predicted pressure matches the CFD label at Pearson $r = 0.941/0.993$ and reproduces the $\mathrm{FFR}\le 0.8$ decision in $97.7\%/96.3\%$ of held-out cases. The predicted velocity does not satisfy continuity closely enough for derived quantities, and the weights are territory-specific.

Explore related subjects

cs.CEphysics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Reza Akbarian Bafghi, Sukirt Thakur, Maziar Raissi. 2026-10-21. CARS: a centerline-anchored attention surrogate for coronary blood flow on skeleton-generated lumen geometries. https://arxiv.org/abs/2610.30498

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Marking strategies for adaptive mesh refinement: An efficiency-focused benchmark study for steady solid and fluid mechanics problems

Adaptive mesh refinement (AMR) is indispensable for efficient finite element analyses. However, its performance depends not only on the refinement itself but also on strategy to mark elements for refinement and the way it is tuned. This work compares classical marking methods (maximum, Dörfler bulk-chasing, quantile) with non-classical, statistically based approaches (z-score, Isolation Forest), all driven by the residual-based Kelly error estimator and tested on steady solid and fluid mechanics problems. The study finds quantile and z-score markings to be the most robust, Dörfler effective for large bulk parameters, and maximum marking sensitive to irregular fields. Isolation Forest can rival top classical methods with a high contamination level but may fail under aggressive settings. These results offer practical guidance for selecting marking strategies that balance refinement aggressiveness and computational cost in adaptive FEM workflows.

cs.CE↗
arXiv2026

Hyperreduction accelerates finite element model updating for the discovery of neural materials

Finite element model updating is among the most general approaches to discover constitutive models from structural experiments: since the displacement field is computed rather than measured, it accommodates arbitrary geometries, boundary conditions, and sparse or noisy data. However, every loss evaluation requires a nonlinear finite element solve per load step, and training neural materials requires many such evaluations. Intrusive model order reduction lowers this cost while retaining boundary conditions and variational structure. How can a reduced model remain accurate while the network weights change at every training step? We combine proper orthogonal decomposition and energy-conserving sampling and weighting with adjoint sensitivities of the reduced model, and adapt both the trial space and the sampled elements along the optimization path. The constitutive law is a polyconvex neural network: a logarithmic normalization term, together with a zero-anchored input convex architecture and a growth term, renders the energy polyconvex, coercive, and non-negative by construction, independent of the trained weights. We demonstrate the approach on two experimental datasets and one synthetic three-dimensional example. For a two-phase specimen, training time decreases from nine hours to 41 minutes compared with a full-order identification, without loss of accuracy. In the three-dimensional example, six modes replace 48 672 degrees of freedom, 116 of 15 625 elements suffice to evaluate the internal forces, and training takes 13 minutes. In all cases, the identified material reproduces the measured reaction force and predicts the displacement field from the force alone. Hyperreduction makes the discovery of neural materials from structural data affordable while retaining the advantages of finite element model updating.

cs.CE↗
arXiv2026

Structure-preserving reduced-order models of thin panels in supersonic and hypersonic flow

We build structure-preserving reduced-order models for both challenge problems of the AePW-4 High-Speed Working Group. They are a clamped thin panel at Mach 1.92 (RC-19) and a cantilever plate at Mach 5.85 (HyMAX). The published data for each case hold no time-resolved response and no repeated runs. The physics must therefore be carried by the form of the model. One construction gives two models per problem. A Ritz-Galerkin reference model describes the plate. A learned model keeps the reference model's exact potential, fits the remaining generalized forces, and trains only a dissipation that cannot add energy. Its energy balance holds for any weights by construction. On the trained model the worst relative residual is 2.2e-15. On RC-19, shock relations predict a pressure ratio of 1.521 across the panel. Pressure-sensitive paint measured the same value. Thirty runs of the learned model place the mean dominant frequency within 1.0% of the measured 236 Hz. At one periodic and one chaotic condition, the learned model reproduces the response regime of a published reduced-order model in all sixteen runs. It does so without that model's 113 Hz spectral peak, which the measurements do not show. Measured displacements can also correct the chaotic response through one more force that respects the energy balance. We tested this on synthetic data at the experiment's 5 kHz sampling rate. The state error is 1.25% of the panel thickness without noise and 3.5% with 10 micrometers of noise. On HyMAX the learned model follows the reference model's trailing-edge displacement for 65 ms with a relative error of 3.7%. These results show that a model whose structure carries the physics can match measured flutter behavior when the available data cannot train it.

cs.CE↗