arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.26630

Sensitivity and Identifiability of Tumor-Related Changes in Longitudinal Microwave Breast Imaging

Somayeh B. Shafiei·Ian Jeffrey·Vahab Khoshdel·Joe LoVetri
View original source ↗Read source document ↗Export metadata ↓

Abstract

Microwave imaging could monitor breast tumor response to neoadjuvant chemotherapy, but between-visit changes in breast positioning and normal tissue may confound tumor-related changes. We use eight patient-specific dielectric models from longitudinal MRI of two patients at four time points. For each model, 24-port S-parameters were simulated from 1 to 3 GHz, and Jacobians computed for tumor permittivity and loss, fibroglandular tissue (FGT) permittivity, and breast rotation and translation. 1 mm positioning changes produced changes 20 to 50 times larger than a 10% tumor permittivity change above 2 GHz. Nevertheless, tumor sensitivity patterns were weakly aligned with positioning patterns, tumor-FGT similarity exceeded 0.8 at only some visits, and the Jacobians remained well conditioned. Tumor responses are thus small but separable; monitoring will require positioning correction, frequency selection, and noise-aware detectability analysis.

Explore related subjects

physics.med-pheess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Somayeh B. Shafiei, Ian Jeffrey, Vahab Khoshdel, Joe LoVetri. 2026-10-19. Sensitivity and Identifiability of Tumor-Related Changes in Longitudinal Microwave Breast Imaging. https://arxiv.org/abs/2610.26630

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Three-dimensional stochastic retinal models for synthetic eye-models

Purpose: Current eye models often assume a fixed spherical retinal curvature of 12 mm, which does not reflect the anatomical variability observed in vivo. This study proposes an extension incorporating the stochastic relationship between axial length and three-dimensional (3D) retinal curvature, enabling more realistic 3D eye models. Methods: Axial length and 3D retinal curvature data from 94 subjects, split into five subsets for cross-validation, were used to construct two probabilistic models: a Single Gaussian Model (SGM) and two-component Multi Gaussian Mixture Model (MGMM). Both were converted into conditional forms to estimate retinal curvature for a specific axial length, and evaluated against measured data distributions. Results: All models produced radii of curvature comparable to measured data (median difference <0.2 mm). Non-conditionally, the MGMM described the distribution slightly better than SGM, with higher density overlap (>94% vs. >86%), but similar variance (worst f-test (p-value) 1.05 (0.71) vs. 1.05 (0.73)). Conditioned on axial length, both models performed similarly with overlap exceeding 93% and the worst f-test 1.02 (0.84). Given its simplicity and robustness, the conditional SGM was selected, achieving similar validation results: median difference (<0.10 mm), overlap (>92%), and a non-significant worst f-test (1.02 (0.85)). Conclusions: The conditional SGM enables accurate generation of anatomically realistic 3D retinal curvatures based on axial length, supporting improved stochastic eye modeling for visual optics and population-based simulations of healthy eyes. Translational relevance: Replacing the fixed 12 mm retina assumption with a population-based stochastic model improves anatomical accuracy of eye models used in optical design and treatment planning.

physics.med-ph↗
arXiv2026

Implementing the EIT complete electrode model through Robin boundary conditions

Objective. Medical electrical impedance tomography systems prescribe electrode currents. Accurate voltages, even on passive electrodes, require the complete electrode model (CEM), the most accurate model known for skin electrodes. Its current constraints specify total electrode currents, whereas standard finite element boundary interfaces impose local conditions. We describe how to implement the CEM through Robin boundary conditions, which are available in standard FEM packages. Approach. Prescribed electrode potentials give Robin problems whose unit-potential responses define an electrode transadmittance matrix. We prove equivalence to the conventional augmented CEM and formalise the discrete energy, equivalence and reference arguments in Lean 4. Numerical comparisons use two-dimensional P1 finite elements in DOLFINx, FreeFEM, GetFEM, MFEM and NGSolve, with the same nodal reference potential as EIDORS. Main results. For identical assembled blocks, the two procedures have the same solution set whenever the Robin matrix is invertible. Across the five packages in dimensionless test cases, maximum absolute electrode-potential differences from EIDORS were below $5\times10^{-13}$ (2692 nodes), and errors against an exact rational-arithmetic reference were below $1.1\times10^{-13}$ (2535 nodes). Significance. Standard Robin solves and consistent electrode-current integration provide a portable route to the current-driven CEM, with current constraints enforced through a small electrode system.

physics.med-ph↗
arXiv2026

Attenuation corrected activity reconstruction for listmode TOF-PET data

Time-of-flight (TOF) positron emission tomography (PET) emission data allow joint estimation of the activity and attenuation images. The methods proposed so far rely on reconstructions from TOF histograms of the measurements. However, with the rapid data increase of total-body (TB) scanners and the ever improving TOF and intrinsic resolutions, more memory and computation efficient techniques for joint reconstruction need to be developed. In this work, a modified version of the maximum likelihood activity and attenuation correction factors algorithm (MLACF) is presented, that jointly estimates the activity image together with the attenuation factors (AFs) from listmode emission data. The method does not require TOF histogramming of the data, however it still relies on a coarsely sampled (i.e. mashed) non-TOF histogram of the emission data. The activity distribution is subsequently quantified by reconstructing and enforcing known expected tissue attenuation on an attenuation reconstruction from the estimated AF values. The algorithm is evaluated using 3D simulations as well as clinical TOF-PET measurements of a patient scan and compared to reference reconstructions. As could be expected, we find the reconstruction accuracies improve with an "optimal" histogramming of the TOF emission data, increasing the signal to noise ratio of the data used for joint estimation. With an "optimal" histogramming of the measurements, the attenuation corrected activity distributions from TOF emission data only are comparable to the gold-standard in PET/CT.

physics.med-ph↗