Separating mixtures of single-fiber orientation distributions for increased sensitivity to crossing white matter fibers

Adam M. Saunders; Gaurav Rudravaram; Michael E. Kim; Elyssa M. McMaster; Yifan Shuai; Warren Boschen; Sophie Lin; Suzana Herculano-Houzel; Daniel C. Colvin; Yurui Gao; Kurt G. Schilling; Adam W. Anderson; Bennett Landman

arXiv · 2610.20974

Separating mixtures of single-fiber orientation distributions for increased sensitivity to crossing white matter fibers

Adam M. Saunders·Gaurav Rudravaram·Michael E. Kim·Elyssa M. McMaster·Yifan Shuai·Warren Boschen·Sophie Lin·Suzana Herculano-Houzel·Daniel C. Colvin·Yurui Gao·Kurt G. Schilling·Adam W. Anderson·Bennett Landman

View original source ↗Read source document ↗Export metadata ↓

Abstract

Intro: Diffusion MRI allows for in vivo probing of brain tissue architecture via micron-level diffusion aggregated at the millimeter scale, but crossing white matter fibers decrease the sensitivity of downstream tasks such as microstructural modeling and tractography. Current fixel-based methods for identifying the number, orientation, and spread of fibers rely on finding the peaks of fiber orientation distributions from constrained spherical deconvolution. However, this method is biased by the spreads of nearby fibers and fails at angular separations lower than approximately 40-50 degrees. Methods: In this work, we perform a constrained nonlinear optimization called fiber segmentation by signal splitting and iterative least squares estimation (FISSILE), modeling each voxel as a mixture of single-fiber distributions. We use FISSILE to fit axially symmetric fibers in simulations and on three in vivo human subjects from the Human Connectome Project, an ex vivo raccoon brain, as well as the same human subject scanned twice at two different signal-to-noise ratios (SNRs). Results: On simulated data, FISSILE successfully identifies fibers at an angular separation of 40° and a volume fraction of 0.1 at an SNR as low as 30, while MRtrix3's fod2fixel is limited to 60° separation and 0.1 volume fraction at the same SNR. On acquired data, FISSILE identified 85.8% of white matter voxels on average in human brains and 79.4% in the raccoon with at least one fiber crossing, whereas fod2fixel identified 30.1% and 44.5%. The number of white matter fiber crossings was mildly sensitive to different noise levels in the human subject with two acquisitions. Conclusion: A method that models the crossing fiber phenomenon as an unmixing problem increases sensitivity to individual fibers for more precise characterization of anatomy.

Explore related subjects

eess.IV q-bio.QM

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Adam M. Saunders, Gaurav Rudravaram, Michael E. Kim, Elyssa M. McMaster, Yifan Shuai, Warren Boschen, Sophie Lin, Suzana Herculano-Houzel, Daniel C. Colvin, Yurui Gao, Kurt G. Schilling, Adam W. Anderson, Bennett Landman. 2026-10-14. Separating mixtures of single-fiber orientation distributions for increased sensitivity to crossing white matter fibers. https://arxiv.org/abs/2610.20974

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

SLIM: Semantic-based Low-bitrate Image compression for Machines

In recent years, the demand of image compression models for machine vision has increased dramatically. However, the training frameworks of image compression still focus on the vision of human, preserving unnecessary details and limiting bitrate efficiency for machine vision tasks. In this paper, we propose Semantic-based Low-bitrate Image compression for Machines, termed SLIM. This proposed framework consists of two key components: RoI-focused latent compression and semantic latent enhancement with dual cues. First, the latent compressor is trained to focus on Region-of-Interest (RoI) areas that are semantically and functionally important for machine vision tasks in the latent space, while requiring no explicit masks during inference. Second, to compensate for severe information loss at extremely low bitrates, a diffusion-based semantic decoder enhances the compressed latent with a pretrained diffusion model guided by two complementary cues provided by an RoI-focused latent and text-based semantic guidance. This design preserves RoI details that are critical for machine perception while maintaining semantically coherent and artifact-suppressed non-RoI regions under extremely low bitrates. Experimental results show that SLIM consistently achieves strong performance across diverse machine vision tasks under the same bits per pixel condition, compared to conventional image compression models for machines. Our code is available at https://github.com/mcml-official/SLIM

eess.IV↗

arXiv2026

Severity-Channel Conditioning: An Injection-Level Study for Consumer-Device Deblurring

Motion-deblurring models lose substantial accuracy when transferred from professional cameras to smartphone-derived imagery. This paper studies whether a severity descriptor, partly derived from the paired sharp target, helps adaptation on the iPhoneBlur consumer-device benchmark. Under a shared update budget, input concatenation of a severity map is compared with global feature modulation by capture metadata, spatial feature modulation by the severity map, and a tier-contrastive output objective, together with an unconditioned spectral-loss control, all fine-tuned from the same domain-adapted latent-diffusion baseline. The primary experiment is an oracle diagnostic: target-derived information is supplied at inference. For the evaluated model pair, input concatenation improves overall peak signal-to-noise ratio from 31.23 to 31.30 dB, whereas feature modulation, the contrastive objective, and the spectral-loss control do not exceed the baseline. The gain is positive on 87.2% of test images and on 14 of 15 held-out source videos; this video-level analysis describes the evaluated checkpoint pair and does not establish robustness to retraining, and three training seeds are reported separately. The input-level gain recurs on a transformer backbone. In one exploratory run, zeroing the channel at inference retains most of the gain in peak signal-to-noise ratio but lowers structural similarity below the baseline. A normalized-step diagnostic does not support the expected larger-gradient explanation. The results characterize the evaluated configurations and do not establish injection location as the sole cause, a spatial-locality mechanism, or a reliable deployment advantage.

eess.IV↗

arXiv2026

CryoSplat: Gaussian Splatting for Cryo-EM Homogeneous Reconstruction

As a critical modality for structural biology, cryogenic electron microscopy (cryo-EM) facilitates the determination of macromolecular structures at near-atomic resolution. The core computational task in single-particle cryo-EM is to reconstruct the 3D electrostatic potential of a molecule from noisy 2D projections acquired at unknown orientations. Gaussian mixture models (GMMs) provide a continuous, compact, and physically interpretable representation for molecular density and have recently gained interest in cryo-EM reconstruction. However, existing methods rely on external consensus maps or atomic models for initialization, limiting their use in self-contained pipelines. In parallel, differentiable rendering techniques such as Gaussian splatting have demonstrated remarkable scalability and efficiency for volumetric representations, suggesting a natural fit for GMM-based cryo-EM reconstruction. However, off-the-shelf Gaussian splatting methods are designed for photorealistic view synthesis and remain incompatible with cryo-EM due to mismatches in the image formation physics, reconstruction objectives, and coordinate systems. Addressing these issues, we propose cryoSplat, a GMM-based method that integrates Gaussian splatting with the physics of cryo-EM image formation. In particular, we develop an orthogonal projection-aware Gaussian splatting, with adaptations such as a view-dependent normalization term and FFT-aligned coordinate system tailored for cryo-EM imaging. These innovations enable stable and efficient homogeneous reconstruction directly from raw cryo-EM particle images using random initialization. Experimental results on real datasets validate the effectiveness and robustness of cryoSplat over representative baselines. The code will be released at https://github.com/Chen-Suyi/cryosplat.

eess.IV↗