arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.17287

Active noise cancellation extends the benefit of AI speech enhancement in real hearing-aid recordings

Andrew T. Sabin·Linkai Li
View original source ↗Read source document ↗Export metadata ↓

Abstract

Active noise cancellation (ANC) is common in headphones but rare in hearing aids, and its value for understanding speech in noise is not established. Algorithms that improve signal-to-noise ratio (SNR) act only on the hearing aid's amplified path, while unprocessed sound also reaches the eardrum directly through the vent, limiting the SNR improvement that is realized. Our earlier simulations predicted that attenuating this direct path with ANC would substantially increase the benefit of such processing. We tested that prediction in three hardware conditions: a standard receiver-in-canal (RIC) hearing aid, and an ANC-capable RIC with ANC off and on. Each was fit to NAL-NL2 targets for an N3 hearing loss and recorded on KEMAR with an AI speech-enhancement algorithm (AI-SE) off and on, in seven realistic scenes above 70 dB SPL. Speech and noise spectra were estimated from each recording with a binary time-frequency mask derived from the clean speech. AI-SE produced a similar peak benefit of about 4 dB in the high frequencies in all three conditions, but that benefit stayed at or above 1 dB only above 1500, 600, and 130 Hz for the standard RIC, ANC RIC (ANC off), and ANC RIC (ANC on), respectively, closely tracking the measured attenuation of the direct path. With AI-SE on, ANC RIC (ANC on) improved SII-weighted SNR by 5.1 dB relative to the open ear, compared with 3.3 dB for ANC RIC (ANC off) and 1.6 dB for the standard RIC. With AI-SE off, enabling ANC added only 0.2 dB. ANC is therefore an enabling technology: on its own it added little, but by attenuating the direct path it allowed SNR-enhancing processing to deliver substantially greater benefit at the eardrum, extending that benefit to much lower frequencies.

Explore related subjects

eess.AS

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Andrew T. Sabin, Linkai Li. 2026-10-12. Active noise cancellation extends the benefit of AI speech enhancement in real hearing-aid recordings. https://arxiv.org/abs/2610.17287

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Uncertainty Quantification and Risk Control for Multiple Sound Source Localization

Reliable Sound Source Localization (SSL) plays an essential role in many downstream tasks, where informed decision making depends not only on accurate localization but also on the confidence in each estimate. This need for reliability becomes even more pronounced in challenging conditions, such as reverberant environments and multi-source scenarios. However, existing SSL methods typically provide only point estimates, offering limited or no Uncertainty Quantification (UQ). We leverage the Conformal Prediction (CP) framework and its extensions for controlling general risk functions to develop two complementary UQ approaches for SSL. The first assumes that the number of active sources is known and constructs prediction regions that cover the true source locations. The second addresses the more challenging setting where the source count is unknown, first reliably estimating the number of active sources and then forming corresponding prediction regions. We evaluate the proposed methods on extensive simulations and real-world recordings across varying reverberation levels and source configurations. Results demonstrate reliable finite-sample guarantees and consistent performance for both known and unknown source-count scenarios, highlighting the practical utility of the proposed frameworks for uncertainty-aware SSL.

eess.AS↗
arXiv2026

DELTA-TTS: Adapting Autoregressive Model into Diffusion Language Model for Text-to-Speech

Autoregressive (AR) text-to-speech (TTS) models generate discrete speech tokens sequentially, which makes inference slow and can degrade robustness, since local errors propagate to later positions and can escalate into hallucination. This limitation stems from their left-to-right AR commitment: each token must be determined before future speech-token context is available. However, such ordering is not an inherent requirement for TTS, since the model receives the full input text before synthesis. In this paper, we introduce DELTA-TTS, a lightweight LoRA-based adaptation framework that converts a pretrained AR TTS model into a discrete diffusion language model (dLLM) for confidence-ordered speech-token decoding. To better capture the local structure of speech, DELTA-TTS incorporates a convolution module that injects local acoustic context, together with a 1/t-weighted training objective and a time-shifted inference schedule that together defer low-confidence positions to later steps. Trained on only 585 hours of LibriTTS, DELTA-TTS achieves a 1.75% WER on Seed-TTS test-en, outperforming its AR backbone while generating tokens 3.3 times faster. Further analysis shows that DELTA-TTS produces sharper text-speech alignment, increases overall decoding confidence, and mitigates the hallucinations observed in AR generation. Audio samples, inference code, and model weights are available at https://slpr-lab.github.io/DELTA-TTS.

eess.AS↗
arXiv2026

Modeling and Design of a Diaphragm-Integrated Photonic Waveguide Microphone

Can an integrated optical readout improve the useful operating range of a miniature microphone? We address this question with an analytical model of a diaphragm carrying the sensing arm of a Mach-Zehnder interferometer (MZI). The model links pressure-induced bending to waveguide elongation and then to photocurrent, allowing mechanical sensitivity and optical detection limits to be assessed separately. Optical shot noise and back-cavity thermomechanical noise set the pressure resolution, while a 10% total harmonic distortion criterion defines acoustic overload. Two operating regimes are examined: a compact MEMS microphone with 1 mW optical input and a measurement microphone with 100 mW optical input. For the compact case, a 1 mm diameter, 1 micrometer thick, stress-free silicon diaphragm and 100% modulation efficiency give a predicted signal-to-noise ratio of 78 dB and acoustic overload pressure of 124 dB. The higher-power case lowers the modeled noise floor and increases dynamic range relative to the selected measurement microphone benchmark. These estimates rely on favorable assumptions and do not establish a substantial overall advantage in conventional microphone applications. Remote optical interrogation offers a separate motivation for harsh-environment sensing, but the temperature tolerance of the proposed sensing head remains unverified. The analysis identifies the design tradeoffs and measurements needed to test the predicted performance.

eess.AS↗