Surfactant-induced Marangoni stresses and surface viscosity in Faraday instability

Bochang Wang; C. Ricardo Constante-Amores

Home/Archive/arXiv

arXiv · 2610.14983

Surfactant-induced Marangoni stresses and surface viscosity in Faraday instability

Bochang Wang·C. Ricardo Constante-Amores

View original source ↗Read source document ↗Export metadata ↓

Abstract

We investigate the influence of insoluble-surfactant elasticity and Boussinesq-Scriven surface viscosity on the parametric instability of an interface separating two viscous fluids. The two-fluid Floquet formulation of Kumar& Tuckerman (J. Fluid Mech., vol. 279, 1994, pp. 49-68) is extended to include surfactant transport, Marangoni stresses and surface viscosity. For the parameter range considered, both mechanisms increase the onset acceleration relative to the clean interface state, but through distinct responses: Marangoni elasticity produces a non-monotonic threshold, whereas surface viscosity yields a monotonic increase towards saturation. Analysis of the corresponding unforced gravity-capillary modes shows that both mechanisms modify modal damping and natural frequency. Wavenumber selection reduces the detuning from subharmonic resonance by approximately an order of magnitude relative to that evaluated at the clean interface critical wavenumber. Along the selected branches, variations in the onset acceleration closely follow those in modal damping, with residual detuning playing a secondary role. Despite their distinct interfacial stress mechanisms, both Marangoni elasticity and surface viscosity suppress tangential interfacial motion in the strong-rheology limit, approaching a common tangentially immobilized condition.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Bochang Wang, C. Ricardo Constante-Amores. 2026-10-10. Surfactant-induced Marangoni stresses and surface viscosity in Faraday instability. https://arxiv.org/abs/2610.14983

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Gas radiation and the gravity limit of flicker in a co-flowing hydrogen jet diffusion flame

Although weak at normal gravity, gas radiation sets the gravity at which a co-flowing hydrogen jet diffusion flame stops flickering. Flamelet-based simulations with unity Lewis numbers, which reproduce the flicker frequency measured by femtosecond coherent anti-Stokes Raman scattering within 4%, are combined with local stability analysis. At one tenth of normal gravity, the adiabatic flame flickers, the radiating flame does not, and switching the emission off restores flicker. Radiation acts through two mechanisms that do not weaken at reduced gravity. The hot outer layer loses buoyancy in proportion to the gas residence time, and a disturbance that displaces the flame also displaces its emission, which damps the disturbance on the lean flank (displaced-emission damping). Freezing the radiative source, which removes only its response to disturbances, slows the downstream recession of the oscillation more than tenfold. Both mechanisms slow the upstream spreading of disturbances. This spreading, competing with the co-flow, sets the onset location and the critical co-flow. Without radiation, the spreading speed scales with the square root of gravity; its radiative reduction does not. At reduced gravity, the flicker limit therefore becomes a straight line relating the square root of the co-flow Froude number to a radiation number, the ratio of buoyant to radiative time scales. The calibrated line places the critical gravity for the experimental co-flow at 0.13 times normal gravity, 2.6 times the adiabatic value. It correctly predicted whether two further flames keep flickering. Beyond the limit, transient wave packets can mimic flicker throughout a short drop-tower test.

physics.flu-dyn↗

arXiv2026

High-fidelity Three-Dimensional Flow Field Reconstruction Driven by Turbulent Fluid Dynamics

High-fidelity three-dimensional turbulent flow fields are essential for scientific and engineering analyses, yet obtaining them through direct numerical simulation or high-resolution measurements remains expensive. Super-resolution reconstruction from coarse-grained data therefore offers a promising alternative, but remains fundamentally challenging because fine-scale structures are intrinsically three-dimensional and dynamically coupled across scales. Existing data-driven approaches still struggle to recover multiscale volumetric structures and their coherent temporal evolution. To address these limitations, we propose a turbulence-aware framework for time-resolved three-dimensional flow reconstruction. The framework couples a multiscale neural operator, designed to recover volumetric structures, with a state space model to promote temporal consistency in the reconstructed dynamics. In addition, Navier-Stokes residuals are incorporated as soft constraints to regularize the reconstruction toward physically plausible dynamics. A mixture-of-experts mechanism is also introduced to support unsupervised adaptation to unknown coarse-graining. Across evaluations on canonical turbulent systems and atmospheric reanalysis data, the proposed framework reduces reconstruction errors relative to learning-based and classical baselines, while better preserving multiscale spatial structure and coherent temporal evolution. These results validate the effectiveness of the proposed framework in reconstructing high-fidelity three-dimensional flow fields from coarse-grained data.

physics.flu-dyn↗

arXiv2026

One-way pressure-independent valves with hysteresis and chattering

We propose a model for the one-dimensional isothermal gas flow through a valve in a pipe. The valve aims at keeping the outgoing flow in an assigned interval; moreover, its opening and closing depend on a further parameter. The model is realized by a system of two conservation laws with suitable conditions coupling the ingoing and the outgoing flow. We study the corresponding Riemann problem, where non-classical shocks show up. Although simple, the model allows to study two key oscillatory behaviors of the flow, which are due, respectively, to the chattering of the valve, especially seen in the numerical simulations, and to the stabilizing hysteresis induced by the valve operation. We characterize the states leading to chattering and show how they depend on the parameters of the model. Through several numerical simulations, we study the interplay between the two above phenomena.

physics.flu-dyn↗