arXiv Science⌕ Search

arXiv · 2610.14516

UAV SAR Imaging via Diffusion Posterior Sampling under Non-Ideal Motion in ISAC Systems

Abstract

Unmanned aerial vehicle-enabled synthetic aperture radar (SAR) offers significant potential for providing communication services to ground users while sensing the surrounding environment in low-altitude integrated sensing and communication (ISAC) systems. However, its practical deployment is challenged by known non-ULM trajectories and unknown position errors, which violate conventional SAR assumptions and cause severe image defocusing. We address these non-ideal impacts by formulating the ISAC SAR imaging as an exact linear inverse problem to accurately model arbitrary trajectories with multiple-input multiple-output orthogonal frequency division multiplexing waveforms. Based on this formulation, we develop a diffusion posterior sampling (DPS)-based super-resolution SAR framework, where a pre-trained diffusion model provides a data-driven image prior and the exact physical model enforces measurement consistency during posterior inference. The inference process is further accelerated for practical implementation. For unknown position errors, we develop a joint iterative DPS and motion compensation (MoCo) optimization algorithm with discrete cosine transform reparameterization and coarse-to-fine spectral scheduling. Simulations demonstrate that our framework achieves high-accuracy reconstruction across diverse trajectories and remarkable super-resolution, maintaining greater than 21.3 dB peak signal-to-noise ratio (PSNR) even under half physical resolution truncation. Under unknown motion errors, the joint DPS and MoCo algorithm achieves 23.65 dB PSNR with a residual position-error estimation error of 0.19 cm.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Keying Zhu, Le Liang, Jie Yang, Fan Liu, Shi Jin. 2026-10-10. UAV SAR Imaging via Diffusion Posterior Sampling under Non-Ideal Motion in ISAC Systems. https://arxiv.org/abs/2610.14516

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Covariance Learning for Direction-of-Arrival Estimation with Sparse Linear Arrays

Covariance learning (CL) estimates source powers and sensor-noise variance by minimizing the Type-II (marginal) negative log-likelihood of the array measurements. We develop both grid-based and gridless CL direction-of-arrival (DOA) estimators applicable to arbitrary sparse linear array (SLA) geometries. The grid-based DOA estimator minimizes the Type-II objective on an angular grid via successive convex approximation (SCA) and estimates the noise variance by a scalar bisection search. The gridless DOA estimator then refines each grid-based DOA over the continuum using a Newton method. Simulations on a six-sensor nested array, including an underdetermined case with nine sources, show that the proposed DOA estimators outperform state-of-the-art methods, despite jointly estimating the sensor noise variance.

eess.SP↗

Two-Layer Microwave Linear Analog Computer (MiLAC)-Aided Multi-User MIMO Networks

Microwave linear analog computer (MiLAC)-aided beamforming, which performs signal processing directly in the analog domain, has recently emerged as a promising alternative to fully digital and hybrid beamforming for multi-antenna systems. However, existing studies have shown that a single lossless and reciprocal MiLAC at the transmitter cannot, in general, attain the performance of fully digital beamforming in multi-user scenarios. To overcome this limitation, we propose a two-layer MiLAC-aided transmit beamforming architecture for downlink multi-user multiple-input multiple-output (MIMO) networks. Leveraging multiport microwave network theory, we first establish a general physics-compliant model of the proposed architecture, and then derive a simplified model under the assumptions of unilateral and perfectly matched amplifiers. We prove that, with lossless and reciprocal MiLACs, the two-layer MiLAC-aided transmitter can realize any fully digital transmit beamformer, while a single-layer MiLAC-aided receiver can attain the same achievable rate as a fully digital linear combiner. We then derive closed-form mappings from fully digital transmit beamformers and receive combiners to their corresponding MiLAC-aided analog implementations. Based on these equivalence results, we formulate a sum-rate maximization problem for the considered multi-user MIMO network and develop an optimization framework for jointly designing the power allocation and scattering matrices of the MiLAC-aided transceivers. Numerical results validate the theoretical analysis and show that the proposed two-layer MiLAC-aided design attains the same sum-rate performance as its fully digital counterpart.

eess.SP↗

Efficient Localization of Directional Emitters via Joint Beampattern Estimation

Localization methods designed for omnidirectional emitters degrade on directional sources, where directive beampatterns induce pronounced received signal strength (RSS) modulations. We present a direct position determination (DPD) approach that augments standard angle of arrival (AOA) and time difference of arrival (TDOA) measurements with RSS modulation to jointly estimate emitter position and beampattern parameters. Two algorithms reduce the four-dimensional search to two dimensions: a block coordinate ascent (BCA) method that alternates between position and beampattern subproblems, and a profile likelihood method that concentrates the beampattern parameters out via a generalized eigenvalue solve, a weighted least squares fit, and Newton refinement on the constrained Rayleigh quotient. We derive the Cramér--Rao lower bound (CRLB) and benchmark against an AOA-TDOA baseline and a prior-art approach that assumes known beamwidth and estimates only the orientation. The profile likelihood method approaches the CRLB, substantially outperforms all baselines at low signal-to-noise ratio (SNR), and remains robust under model mismatch with the assumed von Mises template. A sensitivity analysis shows performance peaks when receivers lie on the main-lobe edges where RSS gradients are maximized.

eess.SP↗