arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.13118

The value of information and the emergence of communication in evolved e-puck robots

Fernando Montes-Gonzalez
View original source ↗Read source document ↗Export metadata ↓

Abstract

We study when communication emerges between autonomous agents and what role an innate action selection architecture plays. Two e-puck robots, reconstructed in PyBullet from their Webots model and validated against it, must find a feeding zone that can only be detected when a robot passes over it. Each robot can emit a one-bit signal whose direction is detected by the receiver. Control is provided by a GRU recurrent network with a residual path, either operating alone or as a channel within an Embedded Action Selection Architecture (EASA). Fitness measures only the time the robots spend over the food. When the robots receive a compass pointing to the food, use of the signal disappears completely. Without a compass, in a small arena, three independent runs achieved similar performance using different strategies: a referential signal, a permanent beacon, or no use of the signal. As the arena expands, the strategy based on a referential signal generalizes best. In contrast, evolving directly in the large arena does not increase the frequency of communication, but it does separate the strategies, and the referential signal clearly outperforms solitary searching. Within EASA, innate reflexes constrain the network and reduce performance. As its priorities evolve, evolution consistently weakens those reflexes. The results suggest that communication emerges in proportion to the value of the information it transmits, and that an innate scaffolding designed for isolated agents can be an impediment in a social task.

Explore related subjects

cs.ROcs.MAcs.NE

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fernando Montes-Gonzalez. 2026-10-09. The value of information and the emergence of communication in evolved e-puck robots. https://arxiv.org/abs/2610.13118

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Development of a Low-Cost Prosthetic Hand Using Electromyography and Machine Learning

Electromyography (EMG) is a measure of muscular electrical activity and is used in many clinical/biomedical disciplines and modern human computer interaction. Myo-electric prosthetics analyze and classify the electrical signals recorded from the residual limb. The classified output is then used to control the position of motors in a robotic hand and a movement is produced. The aim of this project is to develop a low-cost and effective myo-electric prosthetic hand that would meet the needs of amputees in developing countries. The proposed prosthetic hand should be able to accurately classify five different patterns (gestures) using EMG recordings from three muscles and control a robotic hand accordingly. The robotic hand is composed of two servo motors allowing for two degrees of freedom. After establishing an efficient signal acquisition and amplification system, EMG signals were thoroughly analyzed in the frequency and time domains. Features were extracted from both domains and a shallow neural network was trained on the two sets of data. Results yielded an average classification accuracy of 94.8% and 93.2% for the time and frequency domains respectively. Furthermore, results showed a faster computation and response for the time domain analysis; hence, it was adopted for the classification system. A wrist rotation mechanism was designed and tested to add significant functionality to the prosthetic. The mechanism is controlled by two of the five gestures, one for each direction. Which added a third degree of freedom to the overall design. Finally, a tactile sensory feedback system which uses force sensors and vibration motors was developed to enable sensation of the force inflicted on the hand for the user.

cs.RO↗
arXiv2026

Injecting Hallucinations in Autonomous Vehicles: A Component-Agnostic Safety Evaluation Framework

Perception failures in autonomous vehicles (AV) remain a major safety concern because they can directly compromise decision-making and contribute to unsafe behavior. To study how these failures affect safety, researchers typically inject artificial faults into real-world or simulated components and observe the resulting outcomes. However, existing fault injection (FI) studies often target a single sensor within the machine perception (MP) module, resulting in siloed frameworks that are difficult to generalize or integrate into unified simulation environments. This work addresses that limitation by reframing perception failures as hallucinations, that is, false perceptions that distort an AV's situational awareness and may trigger unsafe control actions. Building on this concept, we propose a configurable, component-agnostic hallucination injection framework that induces six plausible hallucination types in an open-source simulation environment. A total of 18,356 simulations (8,695 baseline and 9,661 with hallucinations injected) were executed while AVs crossed an unsignalized intersection with transversal traffic. The results statistically validate the framework and quantify the impact of each hallucination type on collisions and on the minimum distance between the AV and the nearest vehicle, used as a continuous proxy for the safety margin. Certain hallucinations, especially missed detection, blind region, angular drift, phantom perception, and latency, significantly increase the odds of collision, while linear drift significantly reduces minimum distances without producing a statistically significant increase in collision odds in the evaluated scenario. The proposed framework provides a scalable and statistically grounded method for evaluating AV safety under perception distortions and supports future research on fault tolerance and resilient AV design.

cs.RO↗
arXiv2026

DeFM: Learning Foundation Representations from Depth for Robotics

Depth sensors are widely deployed across robotic platforms, and advances in fast, high-fidelity depth simulation have enabled robotic policies trained on depth observations to achieve robust sim-to-real transfer for a wide range of tasks. Despite this, representation learning for depth modality remains underexplored compared to RGB, where large-scale foundation models now define the state of the art. To address this gap, we present DeFM, a self-supervised foundation model trained entirely on depth images for robotic applications. Using a DINO-style self-distillation objective on a curated dataset of 60M depth images, DeFM learns geometric and semantic representations that generalize to diverse environments, tasks, and sensors. To retain metric awareness across multiple scales, we introduce a novel input normalization strategy. We further distill DeFM into compact models suitable for resource-constrained robotic systems. When evaluated on depth-based classification, segmentation, navigation, locomotion, and manipulation benchmarks, DeFM achieves state-of-the-art performance and demonstrates strong generalization from simulation to real-world environments. We release all our pretrained models, which can be adopted off-the-shelf for depth-based robotic learning without task-specific fine-tuning. Webpage: https://de-fm.github.io/

cs.RO↗