arXiv Science⌕ Search

arXiv · 2610.11824

SmartBike: A Low-Power Edge IoT System for Cycling Safety and Real-Time Awareness

Abstract

Urban cycling is a sustainable mode of transportation, but cyclists remain highly vulnerable in dense traffic because of limited situational awareness and the lack of active safety assistance on conventional bicycles. This paper presents SmartBike, a low power Internet-of-Things (IoT) platform for cyclist safety, combining blind spot monitoring, rider usage detection, localization, and wireless edge-to-gateway communication. The proposed system consists of a bike-mounted IoT node and a gateway assisted monitoring interface. The node integrates three time-of-flight sensors for blind spot detection, an IMU module for motion sensing and on-board speed estimation, a GNSS module for localization, and a saddle mounted piezo-electric transducer for event-driven wake up. To satisfy the energy constraints of the IoT node, the design employs piezo-triggered activation, application specific sensing rates, and compact connectionless Bluetooth Low Energy (BLE) advertisements for low overhead transmission. The firmware is implemented in Zephyr RTOS using a lightweight state machine architecture, while the gateway performs passive BLE scanning, payload decoding, and real-time dashboard visualization. The BLE payload is reduced to 11 bytes, and power analysis shows that sensing accounts for more than 90% of the total energy budget, while wireless communication represents less overall consumption. With a 12600 mWh battery, the estimated lifetime reaches approximately 21 months under typical commuting conditions (Average 40 min per day).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sogand Hashemi, Gonçalo Sarabanda Neves Loureiro, Catarina Pereira De Freitas Lima, Lyssa Ramaut, Liesbet Van der Perre. 2026-10-08. SmartBike: A Low-Power Edge IoT System for Cycling Safety and Real-Time Awareness. https://arxiv.org/abs/2610.11824

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Secure Over-the-Air Computation Against Multiple Eavesdroppers using Correlated Artificial Noise

Over-the-air (OtA) computation enables scalable analog aggregation by exploiting the superposition property of wireless channels, making it an attractive joint communication and computation paradigm for distributed sensing and learning. However, the uncoded nature of analog transmission exposes the computation result to eavesdropping, and the fundamental security limits of OtA computation against multiple cooperating adversaries remain poorly understood. In this paper, we develop an estimation-theoretic framework for analyzing the security of analog OtA computation in the presence of multiple distributed eavesdroppers that may jointly process their observations. We first derive the optimal estimator for cooperating eavesdroppers and bounds on the achievable estimation accuracy of both the legitimate receiver and the adversaries. Our analysis reveals a key insight: while random channel phase misalignment provides significant inherent MSE-security against individual eavesdroppers, this protection largely disappears once multiple eavesdroppers cooperate. Motivated by this observation, we propose a correlated artificial noise design based on zero-forcing that preserves the aggregation accuracy at the legitimate receiver while maximizing the estimation error at the cooperative eavesdroppers. Numerical results demonstrate that the proposed design substantially reduces the security advantage gained through eavesdropper cooperation and achieves security close to uncorrelated artificial-noise schemes without sacrificing computation accuracy. These results provide both a theoretical characterization of the security limits of analog OtA computation and a practical design guideline for its secure deployment in real-world wireless systems.

eess.SP↗

Distributed Riemannian Optimization in Geodesically Non-convex Environments

This paper studies the problem of distributed Riemannian optimization over a network of agents whose cost functions are geodesically smooth but possibly geodesically non-convex. Extending a well-known distributed optimization strategy called diffusion adaptation to Riemannian manifolds, we show that the resulting algorithm, the Riemannian diffusion adaptation, provably exhibits several desirable behaviors when minimizing a sum of geodesically smooth non-convex functions over manifolds of bounded curvature. More specifically, we establish that the algorithm can approximately achieve network agreement in the sense that Fréchet variance of the iterates among the agents is small. Moreover, the algorithm is guaranteed to converge to a neighborhood of a first-order stationary point for general geodesically non-convex cost functions. When the global cost function additionally satisfies the local Riemannian Polyak-Lojasiewicz (PL) condition, we also show that it converges linearly under a constant step size up to a steady-state error. Finally, we apply this algorithm to decentralized robust principal component analysis (PCA) and low-rank matrix completion problems and illustrate its convergence and performance through numerical simulations.

eess.SP↗

Integrated sensing and communications in the 3GPP New Radio: sensing limits

Integrated Sensing and Communications (ISAC) is regarded as a key element of the beyond-fifth-generation (5G) and sixth-generation (6G) systems, raising the question of whether current 5G New Radio (NR) signal structures can meet the sensing accuracy requirements specified by the Third Generation Partnership Project (3GPP). This paper addresses this issue by analyzing the fundamental limits of range and velocity estimation through the Cramér-Rao lower bound (CRLB) for a monostatic unmanned aerial vehicle (UAV) sensing use case currently under consideration in the 3GPP standardization process. The study focuses on standardized signals and also evaluates the potential performance gains achievable with reference signals specifically designed for sensing purposes. The compact CRLB expressions derived in this work highlight the fundamental trade-offs between estimation accuracy and system parameters. The results further indicate that information from multiple slots must be exploited in the estimation process to attain the performance targets defined by the 3GPP. As a result, the 5G NR positioning reference signal (PRS), whose patterns may be suboptimal for velocity estimation when using single-slot resources, becomes suitable when multislot estimation is employed. Finally, we propose a two-step iterative range and radial-velocity estimator that attains the CRLB over a significantly wider range of distances than conventional maximum-likelihood (ML) estimators, for which the well-known threshold effect severely limits the distance range over which the accuracy requirements imposed by the 3GPP are satisfied.

eess.SP↗