arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.11474

Net drag reduction in turbulent pipe flow by airfoil-section grids concentrated near the wall

Takuya Masuda
View original source ↗Read source document ↗Export metadata ↓

Abstract

The frictional drag of turbulent pipe flow is responsible for enormous energy consumption in water and natural gas distribution systems. Flow straighteners can reduce this drag by suppressing turbulence, but they generally induce a pressure loss that exceeds the reduction; similarly, large-eddy breakup devices installed in pipes have not achieved a net drag reduction. In this study, a grid of NACA0006 airfoils was adopted as a flow straightener to suppress the pressure loss, and its net drag reduction was evaluated by numerical simulations using the $k$-$ω$ shear stress transport model of the axisymmetric Reynolds-averaged Navier-Stokes equations with periodic boundary conditions. The model was validated against fully developed turbulent pipe flow and a previous experiment on a large-eddy breakup device in a pipe. Under a pressure difference corresponding to a Reynolds number ($\mathit{Re}$) of approximately $10^5$, a grid pattern of concentric rings concentrated near the wall at an axial spacing of 0.5 m increased the flow rate by up to 9.0%, and the flow rate increase remained positive for $5 \times 10^{4} \leq \mathit{Re} \leq 2 \times 10^{5}$. The grid pattern reduced the area-integrated Reynolds shear stress by 29% and brought the velocity profile closer to a laminar one. The effectiveness of the near-wall placement is consistent with the Fukagata-Iwamoto-Kasagi identity, which weights the Reynolds shear stress more heavily closer to the wall.

Explore related subjects

physics.flu-dyn

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Takuya Masuda. 2026-10-08. Net drag reduction in turbulent pipe flow by airfoil-section grids concentrated near the wall. https://arxiv.org/abs/2610.11474

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Geometric Mechanics of Real-Space Energy Transfer in Turbulence

How the local energy transfer across scales in turbulence is encoded in the instantaneous deformation of fluid elements remains a fundamental question. We exploit the spherical geometry of the real-space energy cascade at length scale $\ell$. An exact derivation shows that it can be decomposed locally by strain self-amplification and vortex stretching, with a coefficient equal to the specific moment of inertia $2/5(\ell/2)^2$ of a spherical fluid neighborhood. Direct numerical simulations show that this contribution captures the dominant local transfer and defines a statistical boundary separating forward- and inverse-cascade events. A further longitudinal and transverse decomposition reveals that the longitudinal transfer underlying Kolmogorov's $4/5$ law is governed solely by strain self-amplification, whereas vortex stretching enters through the transverse component. These results establish a purely mechanical connection between turbulent energy cascade and the local rotational and deformational dynamics of fluid elements.

physics.flu-dyn↗
arXiv2026

Inertialess instability of elasto-viscoplastic circular Couette flow

An exploration is presented of two-dimensional, circular Couette flow of an elasto-viscoplastic fluid described by Saramito's (Bingham) constitutive law. Axisymmetrical base states are constructed. As has been noted previously, such states are not unique, with stresses over any plugs depending on the initial polymer stress, and the shear rate and stress may jump discontinuously across the yield surfaces. We show that base states with continuous stress profiles are linearly unstable at zero Reynolds number when they contain regions with relatively low shear rate. Unstable modes become stronger and localized to the yield surfaces as the azimuthal wavenumber increases. We report numerical simulations exploring the nonlinear dynamics of the instability. The linear unstable modes saturate at finite amplitude to create spatio-temporally complicated states. Polymer stress diffusion is added to ease these numerical simulations, eliminating normal-stress discontinuities and instability at the shortest wavelengths. Instability and transition to complex dynamics occur whenever the base flow contains regions with relatively low shear rate.

physics.flu-dyn↗
arXiv2026

Propagating fronts of convection rolls in Rayleigh-Bénard convection

We investigate the propagation of counter-rotating convection rolls in Rayleigh-Bénard convection initiated locally in a quiescent fluid layer under supercritical conditions. The velocity of the front separating quiescent fluid from the forming convection rolls, and the wavenumber of the convection rolls remaining behind the front, are explored. We numerically investigate fronts of forming convection rolls over five orders of magnitude of the reduced Rayleigh number, $ε$, in 2D and 3D domains, for a broad range of boundary conditions, and for different front initiation approaches. In all cases, the front velocity increases as $ε^{1/2}$ with increasing $ε$ for $ε\lesssim 1$ in agreement with predictions using the amplitude equation. The amplitude equation description of the front velocity remains accurate for $ε\lesssim 10$ except when the Prandtl number is large which yields a velocity that is faster than predicted for a fluid layer far from threshold. The wavenumber of the convection rolls increases linearly with $ε$ in agreement with the wavenumber that maximizes the growth rate of perturbations in the linear regime. Farther from onset, the wavenumber growth transitions to a reduced scaling of $ε^{1/4}$ in agreement with predictions using the Swift-Hohenberg equation in the large $ε$ limit. The scalings describing the wavenumber variation with $ε$ are independent of the domain geometry, boundary conditions, and front initiation method. However, the front-selected wavenumber at criticality does not equal the critical wavenumber of the bulk instability, in general, and depends significantly upon these details. We compare our results with experimental measurements where possible.

physics.flu-dyn↗