arXiv Science⌕ Search

arXiv · 2610.09674

Real-time Tokamak Equilibrium Reconstruction Under Limited Experimental Data via Physics-Grounded Synthetic Pre-training

Abstract

Real-time equilibrium reconstruction is essential for tokamak plasma control. Data-driven surrogates are usually trained on high-quality labeled experimental data, but producing a large amount of labeled data sufficient for surrogate learning requires many expensive discharge shots, and few exist at the start of a new campaign or the operation of a new device. To reduce this cost, we propose to pre-train on simulated equilibria, generated at low cost by physics-based simulation, then fine-tune on limited real data. We evaluate under three settings with increasing difficulties, i.e., in-distribution, out-of-distribution (shape), and cross-campaign (temporal) splits, which mirror how reconstruction is actually deployed. Experimental results validate that synthetic pre-training is highly effective when few real labels are available: fine-tuning on only 1% of the full available real dataset cuts the per-sample normalized root-mean-square error (nRMSE) of the reconstructed poloidal flux by roughly 58% under out-of-distribution shapes and 64% under cross-campaign extrapolation, compared to a model trained from scratch on the same amount of real data. These realistic evaluations show that synthetic pre-training improves equilibrium reconstruction accuracy in the data-scarce regime that real tokamak campaigns face.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mingdong He, Qixian Hu, Tengfei Xu, Tailin Wu, Zheng Xiong. 2026-10-07. Real-time Tokamak Equilibrium Reconstruction Under Limited Experimental Data via Physics-Grounded Synthetic Pre-training. https://arxiv.org/abs/2610.09674

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Solution to an unsolved problem in diodes: Limiting current for small emission area and low emission energy

The maximum current that can be extracted from a diode is a central question in electronic devices, especially for the generation of radiation from microwaves to x-rays. The challenge in its prediction increases significantly when the electron emission is restricted to a small area for which the classical one-dimensional Child-Langmuir law is no longer applicable. We address this unsolved problem using a model that simultaneously includes a small emission area and a small electron emission velocity. New scaling laws are presented for this difficult regime. These results are obtained from three vastly different approaches: a differential equation formulation which provides extremely high resolution, an integral equation formulation which leads to the scaling laws, and a particle-in-cell simulation which shows the temporal-spatial evolution. Comparisons of the predicted maximum current among these three approaches are performed over a large range of parameters, paying special attention to the resolution of the potential minimum in the immediate vicinity of the cathode surface. Corroborations of the scaling laws with experiments on thermionic cathodes and on photoinjectors are indicated. The model consists of a periodic array of electron sheets of finite width in a planar diode, all emitted from a cathode with the same energy. Electron motion is restricted to the direction normal to the cathode. This problem is of interest to the electron device, accelerator, pulsed power, aerospace, and applied mathematics communities.

physics.plasm-ph↗

On the particle and electromagnetic boundary conditions in a mesothermal plasma flow

The fully kinetic modeling of mesothermal plasma flows presents significant challenges in the description of boundary conditions for the electrons and the electromagnetic field. Due to their higher mobility compared to ions, electrons extend downstream of the ions, which hinders the implementation of the outflow boundary conditions during transient states. Although the electron drift velocity, $u_e$, is usually neglected as $u_e \simeq u_i < v_{th,e}$, where $u_i$ is the bulk velocity of the ions and $v_{th,e}$ is the thermal velocity of the electrons, we will show how accounting for it, both at the injection of particles and at the outflow boundary condition, is of great importance to achieve quasi-neutrality of charge and current densities. A new partial reflection model for electrons is presented to represent quasi-steady and transitory states. Additionally, we will show how we can employ Ampere-Maxwell's law to better represent the transitory electric field at the outflow boundary compared to the classical `zero-field' Neumann boundary without requiring any numerical parameters. With these new boundary conditions, we improve the quasi-steady and transitory descriptions of expanding mesothermal plasmas.

physics.plasm-ph↗

Implementation and verification of the avalanche source in a 3D full-f particle-in-cell model of relativistic electrons for studies of tokamak disruptions

Tokamak disruptions may lead to the acceleration of some electrons to relativistic energies. These so-called runaway electrons (REs) can multiply exponentially via knock-on collisions with thermal electrons. As the resulting RE avalanche is exponentially sensitive to the pre-disruption plasma current, multi-MA RE beams may form in large future devices, risking severe localized wall damage. In this work, an energy and momentum conserving knock-on collision operator is implemented in the 3D nonlinear MHD code JOREK for the full-f relativistic hybrid fluid-kinetic model that describes the REs using the particle-in-cell (PiC) approach both for full-orbit and drift-kinetic markers, which will enable accurate modeling of the RE phase-space dynamics in realistic 3D electromagnetic fields. Such a self-consistent treatment of the RE avalanche and competing losses in the stochastic fields of MHD-active plasmas is required to further the understanding of RE transport and phase-space dynamics in self-consistent interaction with the 3D plasma evolution, which is needed for developing reliable predictions as well as reliable mitigation methods. To make such novel high-fidelity simulations computationally viable, a resampling technique was also implemented to restrict the number of markers. The avalanche model is verified using analytical expressions from literature and applied to a JET-like termination scenario, demonstrating its applicability to realistic 3D MHD active scenarios. Future work on porting to accelerated high-performance computing systems will be needed to cross the long time scales involved, e.g., in periodic termination and re-avalanching that could occur in large devices like ITER.

physics.plasm-ph↗