arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.09069

Localized Thermal Management of Induction-Heated Microrobots for Hyperthermia Applications

Advika Balaji·Miguel F. Arevalo-Castiblanco·Aaron T. Becker
View original source ↗Read source document ↗Export metadata ↓

Abstract

Induction-heated microrobots face a fundamental thermal management challenge: the alternating magnetic fields required for localized hyperthermia simultaneously generate parasitic ohmic heating within the actuation coils. Conventional cooling approaches can fail because conductive cooling structures placed near the coil can couple to the time-varying field, generating additional electromagnetic losses. This paper addresses this architectural limitation by evaluating two liquid-cooling frameworks designed to isolate the electromagnetic workspace: an indirect configuration utilizing an external copper water block, and a direct architecture routing coolant internally through a hollow helical coil. Evaluated over a 100~s window with multi-point thermocouple telemetry, the indirect water-block configuration failed due to secondary inductive coupling with the block itself, acting as an unintended susceptor that drove the block temperature to an extreme peak of 805$^{\circ}$C. In contrast, the direct internal cooling architecture successfully extracted ohmic losses at the source, sustaining a localized ablation tip temperature of 63.4$^{\circ}$C while strictly restricting surrounding fluid and boundary surfaces below defined thresholds of 33.9$^{\circ}$C and 37.6$^{\circ}$C, respectively. These results establish coil-level fluidic integration as a key design principle for thermally isolated microrobot actuation and provide a hardware foundation for future spatially controlled hyperthermia.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Advika Balaji, Miguel F. Arevalo-Castiblanco, Aaron T. Becker. 2026-10-06. Localized Thermal Management of Induction-Heated Microrobots for Hyperthermia Applications. https://arxiv.org/abs/2610.09069

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Global Geolocated Realtime Data of Interfleet Urban Transit Bus Idling

Urban transit bus idling is a contributor to ecological stress, economic inefficiency, and medically hazardous health outcomes due to emissions. The global accumulation of this frequent pattern of undesirable driving behavior is enormous. In order to measure its scale, we propose GRD-TRT-BUF-4I (Ground Truth Buffer for Idling) an extensible, realtime detection system that records the geolocation and idling duration of urban transit bus fleets internationally. Using live vehicle locations from General Transit Feed Specification (GTFS) Realtime, the system detects approximately 200,000 idling events per day from over 50 cities across North America, Europe, Oceania, and Asia. This realtime data was created dynamically to serve operational decision-making and fleet management to reduce the frequency and duration of idling events as they occur, as well as to capture its accumulative effects. Civil and Transportation Engineers, Urban Planners, Epidemiologists, Policymakers, and other stakeholders might find this useful for emissions modeling, traffic management, route planning, and other urban sustainability efforts at a variety of geographic and temporal scales.

eess.SY↗
arXiv2026

Confidence-Aware Safe and Stable Control of Control-Affine Systems

Designing control inputs that satisfy safety requirements is crucial in safety-critical nonlinear control, and this task becomes particularly challenging when full-state measurements are unavailable. In this work, we address the problem of synthesizing safe and stable control for control-affine systems via output feedback (using an observer) while reducing the estimation error of the observer. To achieve this, we adapt control Lyapunov function (CLF) and control barrier function (CBF) techniques to the output feedback setting. Building upon the existing CLF-CBF-QP (Quadratic Program) and CBF-QP frameworks, we formulate two confidence-aware optimization problems and establish the Lipschitz continuity of the obtained solutions. To validate our approach, we conduct simulation studies on two illustrative examples. The simulation studies indicate both improvements in the observer's estimation accuracy and the fulfillment of safety and control requirements.

eess.SY↗
arXiv2026

Collision Avoidance for Convex Primitives via Differentiable Optimization Based High-Order Control Barrier Functions

Ensuring the safety of dynamical systems is crucial, where collision avoidance is a primary concern. Recently, control barrier functions (CBFs) have emerged as an effective method to integrate safety constraints into control synthesis through optimization techniques. However, challenges persist when dealing with convex primitives and tasks requiring torque control, as well as the occurrence of unintended equilibria. This work addresses these challenges by introducing a high-order CBF (HOCBF) framework for collision avoidance among convex primitives. We transform nonconvex safety constraints into linear constraints by differentiable optimization and prove the high-order continuous differentiability. Then, we employ HOCBFs to accommodate torque control, enabling tasks involving forces or high dynamics. Additionally, we analyze the issue of spurious equilibria in high-order cases and propose a circulation mechanism to prevent the undesired equilibria on the boundary of the safe set. Finally, we validate our framework with three experiments on the Franka Research 3 robotic manipulator, demonstrating successful collision avoidance and the efficacy of the circulation mechanism.

eess.SY↗