arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.09006

Electric Racing Kart with BLDC Drive, LiFePO4 Battery System, Traction Control and Regenerative Braking

Johannes Stockhammer·Tom Rettenwander·Philipp Huber
View original source ↗Read source document ↗Export metadata ↓

Abstract

This diploma thesis documents the conversion of a petrol-powered go-kart into a battery-electric kart with a 10 kW BLDC drive, a LiFePO$_4$ traction battery with battery management system, a slip-based traction control and regenerative braking. The traction control estimates the slip of the driven rear axle from three Hall-effect wheel-speed sensors as $λ= (v_R - v_F)/v_R$ and reduces the torque command of the throttle pedal when the axle slips. It runs on a 32-bit ARM Cortex-M3 microcontroller (SAM3X8E) in the signal path between pedal and motor controller, with galvanic isolation and an emergency stop. Regenerative braking uses the generator mode of the motor controller in three stages: motor brake on throttle release, light braking via a steering-wheel button, and blended braking with the hydraulic brake. Drivetrain calculations show that the kart is traction-limited. At rated torque, the drive force at standstill exceeds the transmissible traction force by a factor of 1.7 to 2.0, up to approx. 27 to 43 km/h. Traction control is therefore a functional requirement of the drivetrain. The calculated top speed is approx. 65 km/h. Regenerative braking reaches approx. 0.45 g and could cover up to about 30 % of the energy demand on a winding track. With 80 % of the nominal battery energy, approx. 44 min of driving at 50 % motor load result, so the target of one hour is missed. The initial charging measurement quantifies the flat LiFePO$_4$ voltage plateau at 0.7 to 1.8 mV per percent state of charge, which makes voltage-based state-of-charge estimation unreliable. Cold cells showed a voltage sag under load that triggered the low-voltage alarm. Validation of the control functions by instrumented driving tests is the main open point.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Johannes Stockhammer, Tom Rettenwander, Philipp Huber. 2026-10-06. Electric Racing Kart with BLDC Drive, LiFePO4 Battery System, Traction Control and Regenerative Braking. https://doi.org/10.5281/zenodo.23072034

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Global Geolocated Realtime Data of Interfleet Urban Transit Bus Idling

Urban transit bus idling is a contributor to ecological stress, economic inefficiency, and medically hazardous health outcomes due to emissions. The global accumulation of this frequent pattern of undesirable driving behavior is enormous. In order to measure its scale, we propose GRD-TRT-BUF-4I (Ground Truth Buffer for Idling) an extensible, realtime detection system that records the geolocation and idling duration of urban transit bus fleets internationally. Using live vehicle locations from General Transit Feed Specification (GTFS) Realtime, the system detects approximately 200,000 idling events per day from over 50 cities across North America, Europe, Oceania, and Asia. This realtime data was created dynamically to serve operational decision-making and fleet management to reduce the frequency and duration of idling events as they occur, as well as to capture its accumulative effects. Civil and Transportation Engineers, Urban Planners, Epidemiologists, Policymakers, and other stakeholders might find this useful for emissions modeling, traffic management, route planning, and other urban sustainability efforts at a variety of geographic and temporal scales.

eess.SY↗
arXiv2026

Confidence-Aware Safe and Stable Control of Control-Affine Systems

Designing control inputs that satisfy safety requirements is crucial in safety-critical nonlinear control, and this task becomes particularly challenging when full-state measurements are unavailable. In this work, we address the problem of synthesizing safe and stable control for control-affine systems via output feedback (using an observer) while reducing the estimation error of the observer. To achieve this, we adapt control Lyapunov function (CLF) and control barrier function (CBF) techniques to the output feedback setting. Building upon the existing CLF-CBF-QP (Quadratic Program) and CBF-QP frameworks, we formulate two confidence-aware optimization problems and establish the Lipschitz continuity of the obtained solutions. To validate our approach, we conduct simulation studies on two illustrative examples. The simulation studies indicate both improvements in the observer's estimation accuracy and the fulfillment of safety and control requirements.

eess.SY↗
arXiv2026

Collision Avoidance for Convex Primitives via Differentiable Optimization Based High-Order Control Barrier Functions

Ensuring the safety of dynamical systems is crucial, where collision avoidance is a primary concern. Recently, control barrier functions (CBFs) have emerged as an effective method to integrate safety constraints into control synthesis through optimization techniques. However, challenges persist when dealing with convex primitives and tasks requiring torque control, as well as the occurrence of unintended equilibria. This work addresses these challenges by introducing a high-order CBF (HOCBF) framework for collision avoidance among convex primitives. We transform nonconvex safety constraints into linear constraints by differentiable optimization and prove the high-order continuous differentiability. Then, we employ HOCBFs to accommodate torque control, enabling tasks involving forces or high dynamics. Additionally, we analyze the issue of spurious equilibria in high-order cases and propose a circulation mechanism to prevent the undesired equilibria on the boundary of the safe set. Finally, we validate our framework with three experiments on the Franka Research 3 robotic manipulator, demonstrating successful collision avoidance and the efficacy of the circulation mechanism.

eess.SY↗