arXiv Science⌕ Search

arXiv · 2609.38663

Self-verifying time-resolved multicomponent gas analysis from raw sensor signals

Abstract

Gas sensor arrays can estimate the composition of gas mixtures from their response patterns. However, when a sensor is used outside the laboratory, the true gas concentrations are unknown, so there is usually no direct way to determine whether the estimated result is reliable. Here, we develop a physics-constrained neural network that estimates time-varying gas concentrations and reconstructs the corresponding sensor signals at the same time. We tested the method with a twelve-channel membrane-type surface stress sensor array exposed to water-ethanol mixtures whose concentrations changed over time. The model reconstructed the concentration profiles of both components from the raw signals. Artificial offsets and sensitivity changes in one channel were detected from disagreement between the measured and reconstructed signals. Deletion or replacement of part of a measurement record was detected from violations of the sorption and mechanical equations. This approach enables time-resolved multicomponent gas analysis with self-verification from a single measurement.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

YingCheng Zhou, Kosuke Minami, Genki Yoshikawa. 2026-09-29. Self-verifying time-resolved multicomponent gas analysis from raw sensor signals. https://arxiv.org/abs/2609.38663

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Absolute Calibration of a Broadband Transmission Grating Spectrometer from 5 to 400 nm with Uncertainty Estimates

We present the absolute calibration of a transmission grating spectrometer (TGS) with uncertainty estimates in the 5--400 nm range using synchrotron radiation at the BEAR beamline at Elettra light source in Trieste, Italy. Firstly, the spectral responsivity of a Si photodiode in the spectrometer was absolutely calibrated with respect to the absolutely-calibrated beamline photodiode. Subsequently, this photodiode was used to calibrate the transmittance of Zr and Al thin-film filters, along with bulk MgF$_2$ and UV-grade fused silica windows at their operating positions in the spectrometer to minimize mounting-induced uncertainties. Next, the quantum efficiency of the spectrometer's CCD camera was calibrated over the 5--400 nm range. Lastly, three gratings with line densities of 10000, 3000, and 1000 lines/mm were calibrated for spectroscopy in the ranges extending from soft X-ray to extreme-, vacuum- and deep-ultraviolet (DUV) wavelengths, respectively. The combination of various filters and gratings enables absolutely calibrated spectroscopy with high versatility across a broad wavelength range from soft X-rays to DUV.

physics.app-ph↗

A State-Variable Theory of Evolving Material Symmetry

Material architecture can evolve during loading, yet its mechanically expressed symmetry depends on both the structural state and the constitutive coupling. We connect these quantities through one parent-invariant free energy with a symmetric traceless internal tensor $\mathbf Q$. Its stabilizer distinguishes isotropic, uniaxial, and biaxial states, and projected gradient kinetics satisfies the structural dissipation inequality. Parent invariance generally guarantees only symmetry inheritance. For an explicit two-coupling elastic potential, we derive a stiffness-contraction reconstruction of $\mathbf Q$ and prove equality of the structural and tangent rotational symmetries for every nonzero coupling pair. The associated acoustic tensor links residual symmetry to protected transverse degeneracies. For a small uniaxial state, the leading squared-speed gap is $|γ_2s|\sin^2\vartheta/(2ρ_0)$; coupling selectivity and residual protection can suppress this term. We also derive a directional acoustic-trace reconstruction and state calibrated and nuisance-aware inverse conditions. Dimensionless structural-field, acoustic, transient finite-element, and synthetic inverse examples illustrate the predictions. The framework connects state evolution, mechanically expressed symmetry, and conditional observability without assigning independent dynamics to a group label.

physics.app-ph↗

Controlled spin-torque driven domain wall motion using staggered magnetic nanowires

The growing demand for storage, due to big data applications, cannot be met by hard disk drives. Domain wall (DW) memory devices such as racetrack memory offer an alternative route to achieve high capacity storage. In DW memory, control of domain wall positions and their motion using spin-transfer torque are important challenges. In this paper, we demonstrate controlled domain wall motion using spin-transfer torque in staggered magnetic nanowires. The devices, fabricated using electron-beam lithography, were tested using a magneto-optical Kerr microscopy and electrical transport measurements. The depinning current, pinning potential and thermal stability were found to depend on the device dimensions of the staggering nanowires. Thus, the proposed staggering configuration helps to fine-tune the properties of domain wall devices for memory applications.

physics.app-ph↗