arXiv Science⌕ Search

arXiv · 2609.36889

All Roads Lead to Rome: Flow-driven Multi-Anchor Exploration for Open-Environment Active 3D Mapping

Abstract

To advance the development of embodied intelligence, Open-Environment Active 3D Mapping has attracted increasing attention, aiming to perform a long-horizon and shortest trajectory exploration for reconstructing unseen scenarios. Since only limited information about unseen environments is available, methods built on the closed-set assumption, i.e., assuming that the test environments are similar to those seen during training, cannot generalize satisfactorily. In existing active mapping methods, long-horizon exploration is often guided by predicting a coarse long-range goal and then converting it into an executable path. However, this stage is usually formulated as single-point prediction. Under partial observability, the same local observation may correspond to multiple plausible exploration directions, making such deterministic prediction prone to brittle decisions and degraded performance in unseen scenarios. Our experiments further verify that this is a key factor underlying their weak generalization. To address this issue, we reformulate long-horizon target prediction as conditional multimodal anchor generation using Conditional Flow Matching.Instead of predicting a single goal, our method learns a conditional distribution over coarse exploration anchors from the current mapping state. These anchors are first converted into executable candidate paths through obstacle-aware planning. We then apply exploration-mode clustering to compress geometrically similar trajectories and reduce candidate redundancy. Finally, a hierarchical selection module selects the most promising mode and reranks paths within it to produce the final executable trajectory. Experiments show that our method improves generalization and reconstruction efficiency in open environments.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Yang Li, Aming Wu, Zihao Zhang, Ziju Han, Sijia Zhang, Yahong Han. 2026-09-29. All Roads Lead to Rome: Flow-driven Multi-Anchor Exploration for Open-Environment Active 3D Mapping. https://arxiv.org/abs/2609.36889

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

An Real-Sim-Real (RSR) Loop Framework for Generalizable Robotic Policy Transfer

The sim-to-real gap remains a critical challenge in robotics, hindering the deployment of algorithms trained in simulation to real-world systems. We propose a flexible Real-to-Sim-to-Real (RSR) framework whose central contribution is an information-theoretic cost function that explicitly accounts for sim-to-real discrepancies. This cost balances two objectives, completing the task and steering the policy to collect real-world samples that are maximally informative for improving transfer. It can be integrated seamlessly into existing reinforcement learning algorithms (e.g., PPO, SAC) and ensures a balanced exploration of critical regions in the real domain. The framework treats differentiable simulation as optional: when a differentiable simulator is available, the collected informative data can also be used to tune simulator parameters. We implement the framework with the MuJoCo MJX platform and demonstrate its generality by evaluating on both manipulation tasks with a 6-DOF robotic arm and locomotion tasks on a legged robot. Empirical results show that our RSR loop yields more efficient data acquisition and substantially improves task performance in real-world that achieves a smoother sim-to-real transfer.

cs.RO↗

Learning-Based Progressive Barrier Control for Robot Manipulators with Initial Errors Outside Prescribed Tracking Bounds

Robot manipulators may start a new task with a tracking error larger than the prescribed tolerance. Conventional barrier controllers generally require the initial error to lie within this tolerance, which prevents their direct use under such conditions. This paper develops a progressive barrier controller that gradually contracts an initial error bound to the required value within a prescribed time. The robot can therefore start outside the final bound, while the direct joint-position error satisfies it after the transition. The closed-form control law combines progressive barrier feedback with an online adaptive torque term based on an actor--critic structure. A Lyapunov analysis establishes bounded closed-loop signals and gives sufficient conditions for satisfaction of the final tracking bound. Two-link simulations consider large initial errors, actuator saturation, dynamic variations, disturbances, and measurement errors. The adaptive term reduces the median root-mean-square tracking error by 45.1\% compared with the zero-weight progressive barrier controller. The simulations also map the initial errors that can be handled at different transition times under fixed torque limits. Finally, an experiment on a Niryo Ned3 Pro illustrates tracking performance using measured position and motor-current data.

cs.RO↗

BIM Informed Visual SLAM for Construction Environments

Monitoring building construction sites requires comparing the as-planned design with the as-built state, which can be estimated in real time using Simultaneous Localization and Mapping (SLAM) techniques. However, visual SLAM is prone to trajectory drift in construction environments, producing maps that are geometrically inaccurate with the actual environment. To address this limitation, we augment an existing RGB-D SLAM system with structural priors derived from the Building Information Model (BIM). The system associates detected walls with their BIM counterparts and includes these correspondences as geometric constraints in the back-end optimization, reducing drift and enhancing global consistency. The proposed method operates in real time and is validated on multiple real construction sites, achieving an average trajectory error reduction of 25.23% and a 7.14% improvement in map accuracy over state-of-the-art baselines. Robustness analyses further demonstrate resilience to incomplete BIM data and geometric discrepancies between as-planned models and the as-built environment.

cs.RO↗