arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2609.34531

Frequency Measurement Practices for Inertia Assessment in Inverter Based Resources Dominated Power Systems

Christos M. Nikolakakos·Hassan Haes Alhelou·Nikos Hatziargyriou
View original source ↗Read source document ↗Export metadata ↓

Abstract

Transmission system operators and protective relays compute the rate of change of frequency (RoCoF) from frequency averaged over tens to hundreds of milliseconds, as standards and grid codes specify. Any response delivered inside that window lowers the measured RoCoF, so the inferred inertia depends on the window and the responses in service. This paper defines the windowed inertia estimate and derives an exact identity the system inertia divided by one minus the fraction of the disturbance energy delivered inside the window and a closed-form prediction that applies the same estimator to the trajectory of a linear response model. Eleven IEEE 9-bus RMS runs synchronous, grid-following and grid-forming configurations, disturbance sizes and parameter sweeps are reproduced by that model, and the identity closes on the measured response powers. Fast frequency response inflates the estimate most: at 500 ms a grid-following system with 20 % less synchronous inertia reports the same value as the all-synchronous system, the grid-forming system a higher one. On a reduced Greek transmission system the 500ms estimate exceeds the inertia by 17-26%, and a scenario with 10% less synchronous inertia reports more than the all-synchronous scenario's inertia. Operators can thus compute what their measurement reports.

Explore related subjects

eess.SYcs.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christos M. Nikolakakos, Hassan Haes Alhelou, Nikos Hatziargyriou. 2026-09-28. Frequency Measurement Practices for Inertia Assessment in Inverter Based Resources Dominated Power Systems. https://arxiv.org/abs/2609.34531

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Reinforcement Learning to Initialize Newton-Raphson for AC Power Flow with Quantum Annealing-Based Environment Updates

The Newton-Raphson (NR) method is widely used for solving power flow (PF) equations due to its quadratic convergence. However, its performance deteriorates under poor initialization or extreme operating scenarios, e.g., high levels of renewable energy penetration. We propose the use of reinforcement learning (RL) to optimize the initialization of NR, and introduce a quantum-enhanced RL environment update mechanism that addresses the combinatorially large action space at each RL timestep by formulating the voltage adjustment task as a Quadratic Unconstrained Binary Optimization (QUBO) problem, solved with an Ising machine. RL initialization is benchmarked against flat start and start from the DC (linearized) PF solution on a standard 4-bus system, Iwamoto's ill-conditioned 11-bus system, and the IEEE 118-bus system under normal and stressed loading and reactive power limits, with verified operational solutions. On all systems, a supervised initializer refined by RL requires fewer NR iterations than flat and DC starts and than the same initializer without RL, for all seeds. For example, on the 118-bus system under normal and stressed loading, it reached 2.04 and 2.86 NR iterations, compared with 3.02 and 5.13 from DC start and 2.61 and 3.09 without RL. In wall-clock time, this pays off only for an initializer integrated into the solver and reused for many solves on a fixed topology. On the 4-bus system, a quantum-enhanced RL agent with a quantum-inspired annealer moved challenging initial states that required 29 and 44 NR iterations to initializations that required three NR iterations within one RL timestep.

eess.SY↗
arXiv2026

Safety for Weakly-Hard Control Systems via Graph-Based Barrier Functions

Despite significant advancement in technology, communication and computational failures are still prevalent in safety-critical engineering applications. Often, networked control systems experience packet dropouts, leading to open-loop behavior that significantly affects the behavior of the system. Similarly, in real-time control applications, control tasks frequently experience computational overruns and thus occasionally no new actuator command is issued. This article addresses the safety verification and controller synthesis problem for a class of control systems subject to weakly-hard constraints, i.e., a set of window-based constraints where the number of failures are bounded within a given time horizon. The results are based on a new notion of graph-based barrier functions that are specifically tailored to the considered system class, offering a set of constraints whose satisfaction leads to safety guarantees despite such failures. Subsequent reformulations of the safety constraints are proposed to alleviate conservatism and improve computational tractability, and the resulting trade-offs are discussed. Finally, several numerical case studies including linear and polynomial systems demonstrate the effectiveness of the proposed approach.

eess.SY↗
arXiv2026

Model-Free Output Feedback Stabilization via Policy Gradient Methods

Stabilizing a dynamical system is a fundamental problem that serves as a cornerstone for many complex tasks in the field of control systems. The problem becomes challenging when the system model is unknown. Among the Reinforcement Learning (RL) algorithms that have been successfully applied to solve problems pertaining to unknown linear dynamical systems, the policy gradient (PG) method stands out due to its ease of implementation and can solve the problem in a model-free manner. However, most of the existing works on PG methods for unknown linear dynamical systems assume full-state feedback. In this paper, we take a step towards model-free learning for partially observed linear dynamical systems with output feedback and focus on the fundamental stabilization problem of the system. We propose an algorithmic framework that stretches the boundary of PG methods to the problem without global convergence guarantees. We show that by leveraging zeroth-order PG update based on system trajectories and its convergence to stationary points, the proposed algorithms return a stabilizing output feedback policy for discrete-time linear dynamical systems. We also explicitly characterize the sample complexity of our algorithm and verify the effectiveness of the algorithm using numerical examples.

eess.SY↗