Nonlinear Participation Factor-based Power System Model Reduction Addressing Near-Resonance Conditions

Mahsa Sajjadi; Kai Sun

Home/Archive/arXiv

arXiv · 2609.33654

Nonlinear Participation Factor-based Power System Model Reduction Addressing Near-Resonance Conditions

Mahsa Sajjadi·Kai Sun

View original source ↗Read source document ↗Export metadata ↓

Abstract

This paper proposes an adaptive model reduction approach based on nonlinear participation factors (NPFs) which determines the most effective selection of unimportant generators in a power system to be linearized to accelerate time-domain simulation for the entire system. The method enables a dynamic transition between the full-order model, and a hybrid reduced model. It uses modal energies to rank system modes under contingencies, and computes NPFs for highly energized modes based on Normal Form theory. To accelerate the computation of NPFs and make it achievable online, a tensor contraction technique is introduced. The proposed approach is tested on a 48-machine, 140-bus NPCC system using both partitioned and unpartitioned strategies. It demonstrates significant simulation speedup while preserving better accuracy than a linear participation factor-based method if the nonlinear behaviors of the system cannot be ignored, especially when a near-resonance condition is presented.

Explore related subjects

eess.SY cs.SY math.DS

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Mahsa Sajjadi, Kai Sun. 2026-09-27. Nonlinear Participation Factor-based Power System Model Reduction Addressing Near-Resonance Conditions. https://arxiv.org/abs/2609.33654

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Reinforcement Learning to Initialize Newton-Raphson for AC Power Flow with Quantum Annealing-Based Environment Updates

The Newton-Raphson (NR) method is widely used for solving power flow (PF) equations due to its quadratic convergence. However, its performance deteriorates under poor initialization or extreme operating scenarios, e.g., high levels of renewable energy penetration. We propose the use of reinforcement learning (RL) to optimize the initialization of NR, and introduce a quantum-enhanced RL environment update mechanism that addresses the combinatorially large action space at each RL timestep by formulating the voltage adjustment task as a Quadratic Unconstrained Binary Optimization (QUBO) problem, solved with an Ising machine. RL initialization is benchmarked against flat start and start from the DC (linearized) PF solution on a standard 4-bus system, Iwamoto's ill-conditioned 11-bus system, and the IEEE 118-bus system under normal and stressed loading and reactive power limits, with verified operational solutions. On all systems, a supervised initializer refined by RL requires fewer NR iterations than flat and DC starts and than the same initializer without RL, for all seeds. For example, on the 118-bus system under normal and stressed loading, it reached 2.04 and 2.86 NR iterations, compared with 3.02 and 5.13 from DC start and 2.61 and 3.09 without RL. In wall-clock time, this pays off only for an initializer integrated into the solver and reused for many solves on a fixed topology. On the 4-bus system, a quantum-enhanced RL agent with a quantum-inspired annealer moved challenging initial states that required 29 and 44 NR iterations to initializations that required three NR iterations within one RL timestep.

eess.SY↗

arXiv2026

Safety for Weakly-Hard Control Systems via Graph-Based Barrier Functions

Despite significant advancement in technology, communication and computational failures are still prevalent in safety-critical engineering applications. Often, networked control systems experience packet dropouts, leading to open-loop behavior that significantly affects the behavior of the system. Similarly, in real-time control applications, control tasks frequently experience computational overruns and thus occasionally no new actuator command is issued. This article addresses the safety verification and controller synthesis problem for a class of control systems subject to weakly-hard constraints, i.e., a set of window-based constraints where the number of failures are bounded within a given time horizon. The results are based on a new notion of graph-based barrier functions that are specifically tailored to the considered system class, offering a set of constraints whose satisfaction leads to safety guarantees despite such failures. Subsequent reformulations of the safety constraints are proposed to alleviate conservatism and improve computational tractability, and the resulting trade-offs are discussed. Finally, several numerical case studies including linear and polynomial systems demonstrate the effectiveness of the proposed approach.

eess.SY↗

arXiv2026

Model-Free Output Feedback Stabilization via Policy Gradient Methods

Stabilizing a dynamical system is a fundamental problem that serves as a cornerstone for many complex tasks in the field of control systems. The problem becomes challenging when the system model is unknown. Among the Reinforcement Learning (RL) algorithms that have been successfully applied to solve problems pertaining to unknown linear dynamical systems, the policy gradient (PG) method stands out due to its ease of implementation and can solve the problem in a model-free manner. However, most of the existing works on PG methods for unknown linear dynamical systems assume full-state feedback. In this paper, we take a step towards model-free learning for partially observed linear dynamical systems with output feedback and focus on the fundamental stabilization problem of the system. We propose an algorithmic framework that stretches the boundary of PG methods to the problem without global convergence guarantees. We show that by leveraging zeroth-order PG update based on system trajectories and its convergence to stationary points, the proposed algorithms return a stabilizing output feedback policy for discrete-time linear dynamical systems. We also explicitly characterize the sample complexity of our algorithm and verify the effectiveness of the algorithm using numerical examples.

eess.SY↗