Site-Selective Yttrium Substitution in Ti3AlC2 Enables Interlayer Engineering and Li Transport in Ti3C2Tx cathodes for High-Power Energy Storage

Tetiana Boichuk; Andrii Boichuk; Mahesh Eledath Changarath; Joao Fonseca; Said Agouram; Marie Finas; Alejandro Molina-Sanchez; Juan F. Sanchez-Royo

arXiv · 2609.32707

Site-Selective Yttrium Substitution in Ti3AlC2 Enables Interlayer Engineering and Li Transport in Ti3C2Tx cathodes for High-Power Energy Storage

Tetiana Boichuk·Andrii Boichuk·Mahesh Eledath Changarath·Joao Fonseca·Said Agouram·Marie Finas·Alejandro Molina-Sanchez·Juan F. Sanchez-Royo

View original source ↗Read source document ↗Export metadata ↓

Abstract

In this work, we introduce a precursor-level strategy by substitutionally doping the Ti3AlC2 MAX precursor with a small amount of Yttrium during top-down MAX preparation. This allows permanent structural changes that are retained in the resulting Ti3C2Tx MXene. Density functional theory (DFT) calculations identify the outer Ti(4f) site, facing the Al layer, as the preferred incorporation site for Y under the Al-excess synthesis conditions used here, rather than the inner Ti(2a) or Al(2b) sites. This site-specific substitution is consistent with the experimentally observed lattice expansion and carbide-like Y bonding and provides a microscopic basis for the structural changes retained in the resulting Ti3C2Tx MXene. Y incorporation expands the MXene interlayer spacing due to an increase in the amount of hydroxyl surface terminations, creating more favorable pathways for lithium-ion transport. Comprehensive structural characterization (including XRD, XPS and TEM) confirms these modifications. As a result, the Y-doped Ti3C2Tx cathode shows diffusion-controlled charge storage with a Li diffusion coefficient of 10-9-10-11 cm2/s. It delivers a reversible capacity of about 130 mAh/g at 0.2 C and retains 74 mAh/g after 1000 cycles at 2 C with nearly 100% Coulombic efficiency. The electrode also achieves a high power density of up to 3970 W/kg, outperforming the undoped MXene and previously reported multilayered MXene cathodes. These results show that substitutional doping of the MAX precursor is a promising strategy for controlling the interlayer structure of MXenes and improving ion transport, providing a new route for the development of high-power energy-storage electrodes.

Explore related subjects

cond-mat.mtrl-sci physics.chem-ph

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Tetiana Boichuk, Andrii Boichuk, Mahesh Eledath Changarath, Joao Fonseca, Said Agouram, Marie Finas, Alejandro Molina-Sanchez, Juan F. Sanchez-Royo. 2026-09-26. Site-Selective Yttrium Substitution in Ti3AlC2 Enables Interlayer Engineering and Li Transport in Ti3C2Tx cathodes for High-Power Energy Storage. https://arxiv.org/abs/2609.32707

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Crystal Dislocations as Atomic Scale Ratchets

The symmetry of a system's response to external stimuli is a fundamental concept in physics and materials science. At the microscopic scale, breaking this symmetry to achieve a rectified response is exceptionally difficult to engineer and remains rare in nature. Conventional micromechanics models of crystalline solids often assume a symmetric response to applied stress, where reversing the load simply inverts the direction of defect velocity without altering its magnitude. In this work, we report an atomic-scale, geometry-rooted mechanism that breaks this symmetry. Molecular dynamics simulations of face-centered cubic nickel reveal that dislocations containing atomic-scale jogs exhibit asymmetric mobility under opposite applied stresses: reversing the loading direction triggers significantly higher drag. This asymmetry arises from the coupling of two internal variables with different transformation parity: a non-affine displacement of an atom at the jog core, and a strain-like tensor associated with the advance of the dislocation. Because jogs are ubiquitous structures in plastic deformation, this discovery challenges classical descriptions of plastic deformation mechanisms, with direct implications for cyclic creep, and opens new pathways for defect engineering to enhance fatigue resistance.

cond-mat.mtrl-sci↗

arXiv2026

The WEST code for large-scale excited-state materials simulations

We present WEST, an open-source plane-wave pseudopotential code for large-scale excited-state materials simulations, and describe its theoretical foundations, software architecture, and capabilities. WEST implements full-frequency GW, quantum defect embedding theory, the Bethe-Salpeter equation, and time-dependent density functional theory within a common algorithmic framework that avoids the explicit computation of virtual electronic states. By combining density functional and density matrix perturbation theory, low-rank representations of the dielectric screening and exact exchange, and localization techniques, WEST achieves favorable computational scaling with system size. The code supports the calculation of quasi-particle and neutral excitation energies, optical and photoluminescence spectra, excited-state forces, and non-adiabatic couplings, with interoperable workflows connecting to quantum chemistry, vibronic coupling, and quantum computing packages. A hierarchical parallelization strategy and GPU acceleration deliver near-ideal strong scaling to thousands of GPUs, enabling accurate excited-state simulations of systems with more than a thousand atoms. Representative applications, spanning the full optical cycle of solid-state spin defects, self-trapped excitons in metal-halide perovskites, and the optical response of liquid water and ice, demonstrate the accuracy and versatility of the code across diverse material classes. The capabilities implemented in WEST establish the code as a scalable platform for predictive excited-state simulations, high-throughput materials discovery, and the generation of high-fidelity datasets for machine learning in computational materials science.

cond-mat.mtrl-sci↗

arXiv2026

Symmetry-Based Design Rules for Second-Harmonic Generation in Stacked and Twisted MoS2 Bilayers

Understanding how stacking controls the nonlinear optical response of two-dimensional materials is key to designing van der Waals heterostructures with tailored functionalities. Here, we establish a comprehensive symmetry-based framework mapping the structural configuration of MoS2 bilayers across four point groups (D3h, D3d, C3v, C3) to their second-order susceptibility tensor chi^(2). Using group-theory arguments benchmarked against first-principles response-function calculations, we demonstrate how symmetry breaking controls the activation and suppression of individual tensor elements in these systems. We show that the emergence of the in-plane component chi_xxx in twisted configurations (C3 group) induces a rigid azimuthal rotation of the second-harmonic generation polar lobes, which remains frequency-independent across the entire optical spectrum, locking to half of the structural twist angle. Our findings establish a direct, wavelength-independent optical route for twist-angle determination and provide a clear roadmap for engineering nonlinear optical responses in two-dimensional materials.

cond-mat.mtrl-sci↗