arXiv Science⌕ Search

arXiv · 2609.32568

Spall Failure of Coral Skeleton beneath Gas-Laden Canopies: An Idealized Blast-Fishing Model

Abstract

Improvised explosives used for fishing on shallow Indonesian reefs shatter coral skeleton, yet the damage they cause has been described largely through empirical radii and ecological surveys. We formulate an idealized model of how free gas held within a coral canopy modifies the shock loading that such a charge delivers to skeletal plates. The canopy is treated as a relaxed bubbly mixture whose shock impedance follows from the conservation of mass and momentum, and the reef is represented as a layered column of water, canopy, skeletal plate, and canopy struck at normal incidence. Three closed-form results emerge. Above a crossover pressure set by the void fraction and the stiffness of seawater, the canopy becomes nearly transparent to the shock. The impulse transmitted through any lossless layered stack is independent of the canopy, so gas redistributes the pulse in time without changing its total push. A plate carries tension after reflection from its lower face only when the canopy impedance falls below a threshold fixed by the plate thickness and the pulse duration, which defines a critical thickness. For a one-kilogram charge directly overhead, a gas-rich canopy more than triples the standoff at which a twelve-centimeter plate spalls while shortening the standoff at which it is crushed. A prescribed daily cycle of photosynthetic gas makes the same charge markedly more damaging at noon than at night. Bubble dynamics show that the canopy does not reach equilibrium within the pulse, so the results are best read as upper bounds.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sandy Hardian Susanto Herho, Agus Wahyu Jatmiko, Rizki Dimas Permana, Iwan Pramesti Anwar, Alfita Puspa Handayani, Faruq Khadami, Karina Aprilia Sujatmiko, Rusmawan Suwarman, Deny Juanda Puradimaja, Dasapta Erwin Irawan. 2026-09-26. Spall Failure of Coral Skeleton beneath Gas-Laden Canopies: An Idealized Blast-Fishing Model. https://arxiv.org/abs/2609.32568

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Leading-edge noise reduction by perforated and porous inserts: a compressible finite-chord prediction without fitted constants

Porous and perforated leading edges reduce turbulence-interaction noise, but predictions of the reduction have relied on material impedances adjusted to the acoustic data. This paper removes that adjustment. The finite-chord scattering problem is solved in compressible subsonic flow for an arbitrary chordwise admittance, with the shed wake, the Kutta condition and permeability-dependent edge singularities, and closed to the far field with the finite span and the array aperture represented. The admittance of a perforated insert is derived from the Rayleigh conductivity of one aperture with three computed corrections: plate thickness, interaction between neighbouring apertures, and Howe's grazing-flow blockage evaluated at the aperture-averaged velocity of the boundary layer. A bulk porous insert is represented by its measured permeability and pore-fluid inertia. For three perforates at four flow conditions the prediction agrees with measurements to 2.5 dB rms over 84 comparisons, against 4.4 dB with the unscaled impedance used previously. Although the Mach number is 0.05, the chord is acoustically non-compact, and an incompressible solution rises where the measurement falls. Two of three bulk porous inserts are predicted to within 1.7 dB rms where interaction noise dominates. Narrow, equally spaced peaks measured on perforated plates are reproduced by none of the admittances tested; their spacing implies a source convecting at 0.62 of the free-stream speed, absent from a frozen-gust model. A parameter study shows that the perforate geometry acts almost entirely through one low-frequency admittance group, in which the hole radius cancels for holes buried in the laminar boundary layer.

physics.flu-dyn↗

Adjoint-based shape optimization of a ship hull using a Conditional Variational Autoencoder (CVAE) assisted propulsion surrogate model

Adjoint-based shape optimization of ship hulls is a powerful tool for addressing high-dimensional design problems in naval architecture, particularly in minimizing the ship resistance. However, its application to vessels that employ complex propulsion systems introduces significant challenges. They arise from the need for transient simulations extending over long periods of time with small time steps and from the reverse temporal propagation of the primal and adjoint solutions. These challenges place considerable demands on the required storage and computing power, which significantly hamper the use of adjoint methods in the industry. To address this issue, we propose a machine learning-assisted optimization framework that employs a Conditional Variational Autoencoder-based surrogate model of the propulsion system. The surrogate model replicates the time-averaged flow field induced by a Voith Schneider Propeller and replaces the geometrically and time-resolved propeller with a data-driven approximation. Primal flow verification examples demonstrate that the surrogate model achieves significant computational savings while maintaining the necessary accuracy of the resolved propeller. Optimization studies demonstrate that neglecting the propulsion system can result in hull designs whose performance is inferior to that of the initial shape when subsequently validated using a numerically resolved propulsor. In contrast, the proposed method produces shapes that actually achieve more than an 8% reduction in resistance.

physics.flu-dyn↗

Control of deterministic breakdown to turbulence of hypersonic boundary layer with spanwise non-uniform surface temperature

Direct Numerical Simulation (DNS) of a Mach 6 boundary layer over a flat plate is performed to assess the effect of spanwise non-uniform surface temperature on breakdown to turbulence under deterministic forcing. The streamwise location of laminar to turbulent transition in hypersonic boundary layers has a significant influence on viscous drag and aerodynamic heating of external surfaces of hypersonic vehicles. Previous work investigated the stabilization of hypersonic boundary layers by optimally growing streaks. More recently, DNS for a hypersonic boundary layer showed that it is possible to generate streaks through a spanwise non-uniform surface temperature distribution. The laminar computations showed the control method can stabilize the second Mack mode and it is robust across a range of Mach numbers and wall temperature ratios. In this work, two scenarios are investigated where two-dimensional (second Mack mode) and oblique (first Mack mode) disturbances dominate the initial linear stage of transition. It is found that weak control streaks with amplitude below 5% of the freestream velocity can reduce high-frequency shear-stress due to the second Mack mode by approximately 30% relative to the uncontrolled configuration, and delay transition. For first Mack mode dominated breakdown, the control streaks have no effect on transition location, but the peak amplitude of the spanwise-integrated wall heat flux is reduced. For the first and second Mack mode-dominated scenarios, the mean and high-frequency peak heat transfer are reduced approximately by 15% and 34%, respectively. The dominant mechanisms are identified and attributed to the pressure work contribution to turbulent kinetic energy and the second Mack mode dilatation work.

physics.flu-dyn↗