arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2609.28426

Shape matters: DEM investigation of geometry-controlled mechanical response in irregular rock fragments under static and dynamic loading

Athena Bahramiyarahmadi·Rick Chalaturnyk
View original source ↗Read source document ↗Export metadata ↓

Abstract

Mechanical characterization of subsurface rock formations typically requires standardized cylindrical core specimens, which are often unavailable from fractured or unconventional reservoir sequences. This study uses a Discrete Element Method (DEM) framework calibrated to Sulphur Mountain Formation siltstone to investigate how fragment geometry governs mechanical response in irregular rock particles, which are direct analogues of drill cuttings. Nineteen specimens (18 procedurally generated irregular geometries and one reference Brazilian disk), normalized to a 10 mm bounding sphere radius, were tested under quasi-static (Brazilian-type) and dynamic (Short Impact Load Cell) loading modes. Four mechanical outputs of failure force (Ff), apparent strength (σf), apparent stiffness (Ka), and stiffness (E) were regressed against seven retained shape descriptors. Results show that force-based quantities are strongly controlled by the surface-area-to-volume (SA/V) ratio under static loading (Adj. R2 = 0.69), while area-normalized quantities (σf and E) are geometrically insensitive. Dynamic loading amplifies geometric sensitivity for failure force and introduces an independent role for surface concavity depth. These findings establish a preliminary quantitative framework for interpreting mechanical measurements from irregular rock fragments when a standardized core is unavailable.

Explore related subjects

physics.geo-phcond-mat.mtrl-sciphysics.app-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Athena Bahramiyarahmadi, Rick Chalaturnyk. 2026-09-23. Shape matters: DEM investigation of geometry-controlled mechanical response in irregular rock fragments under static and dynamic loading. https://arxiv.org/abs/2609.28426

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Assessing foundational atomistic models for iron alloys under Earth's core conditions

We assess the capability of recently developed foundational atomistic models (FAMs) to simulate iron alloys under the extreme pressures and temperatures of Earth's core. Static equations of state for hexagonal close-packed (hcp) and body-centered cubic (bcc) iron, computed using 17 FAMs, are benchmarked against ab initio calculations. Two representative models, MatterSim and MACE, are further evaluated for their ability to reproduce phonon spectra, liquid structure, and melting relations of iron at core conditions. While both models capture several key properties, MACE substantially overestimates the stability of bcc iron and fails to correctly describe the stability of hcp iron. Their performance is also examined for binary liquids, superionic phases, and a seven-component Fe-Ni-Si-S-O-H-C liquid. Although these FAMs were not explicitly trained on data from core conditions, they can reproduce several structural and dynamical properties across a wide range of compositions. However, none of the tested models consistently reproduces all first-principles benchmarks. By analyzing the origins of these discrepancies, we identify several limitations of current FAMs, particularly the lack of an explicit treatment of thermal electronic excitations, which significantly affect phase stability and thermodynamic properties under core conditions. We further discuss directions for improving FAMs to enable predictive simulations of core-forming materials under extreme conditions.

physics.geo-ph↗
arXiv2026

Time-Resolved Surface-Fault Displacement During the 2026 Kumamoto Earthquake From Near-Fault Video

Video recordings can reveal how rapidly fault displacement develops at the Earth's surface, but camera motion and recording artifacts can obscure the ground signal. We analyze a secondary copy of security-camera footage that captured surface displacement during the 28 July 2026 Kumamoto earthquake; the native recording was unavailable and could not be recovered. Two independent image-tracking methods were used. Optical flow follows identifiable image features, whereas normalized cross-correlation (NCC) template matching follows fixed image patches by their similarity. Both measured target-region motion relative to spatially separated reference regions while correcting motion shared by the recording. Image displacement was calibrated to the magnitude of the field-measured offset vector: 1.05 m right-lateral and 0.90 m east-side-up, or 1.383 m in total. We characterize the principal rise by the time required for displacement to progress from 20% to 80% of the selected final level. Across prespecified endpoint choices, optical flow gives 0.866-0.901 s and NCC gives 0.910-0.928 s. These durations correspond to average rates of 0.920-0.958 and 0.895-0.912 m/s, respectively. Checks using independently published tracking windows reproduce the displacement scale, although exact timing is more sensitive in spatially restricted tests. The record also shows an early apparent peak and decline followed by renewed apparent horizontal displacement. Because that later motion may represent either continued ground displacement or the geometry of the secondary recording, neither the permanent endpoint nor physical overshoot can be determined. The most robust conclusion is that the central part of the surface displacement developed in approximately 0.9 s at an average rate near 0.9 m/s.

physics.geo-ph↗
arXiv2026

Parameter-Efficient Adaptation of Pre-Trained Vision Foundation Models for Active and Passive Seismic Data Denoising

The demand for high-resolution subsurface imaging and continuous Earth monitoring has driven rapid growth in active and passive seismic data from dense geophone deployments, distributed acoustic sensing (DAS) arrays, and large-scale 2D and 3D surveys. This expansion makes complex noise suppression increasingly challenging, especially when signal fidelity must be preserved. Conventional supervised deep learning methods are often task-specific, require large paired datasets, and can suffer from domain shift under new acquisition conditions. Foundation models offer a promising alternative, but pre-training seismic foundation models from scratch requires massive domain-specific data and substantial computation. We propose an efficient framework that repurposes general-purpose Vision Foundation Models (VFMs) for geophysical tasks through Parameter-Efficient Fine-Tuning. The architecture uses a pre-trained VFM, a DINOv3 encoder, adapted with Low-Rank Adaptation (LoRA) to enable effective feature adaptation with few additional parameters. To improve robustness under unseen field conditions without ground truth, we introduce a kurtosis-guided unsupervised test-time adaptation module that updates only LoRA parameters during inference. This module self-calibrates the model to site-specific noise by identifying information-rich regions via kurtosis and performing self-training without labeled data. Experiments on public exploration seismic images and DAS vertical seismic profiling data from the Utah FORGE site show that the framework matches or outperforms domain-specific models. Tests on unseen cross-site data from a land survey in China and the Groß Schönebeck geothermal site in Germany further demonstrate strong generalization and effective signal-noise separation. These results highlight the potential of adapting pre-trained VFMs to data-intensive problems in exploration seismology.

physics.geo-ph↗