arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2609.28052

Towards Energy-Neutral IoT Sensors: Low-Cost Chirp-Based Backscattering Node Using a COTS Microcontroller and Multi-Load Front-End

Tijl Schepens·Liesbet Van der Perre·Gilles Callebaut
View original source ↗Read source document ↗Export metadata ↓

Abstract

Backscatter communication has proven to be a key enabler for energy-neutral sensor nodes in the IoT. It allows ultra-low-power nodes to transmit sensor data by reflecting incident RF signals. Practical large-scale deployment requires hardware solutions that are both cost-efficient and widely available. This paper investigates the practical limits of implementing backscatter transmitters exclusively using COTS components. We compare a two-load and multi-load architecture in terms of hardware requirements, complexity and spectral efficiency highlighting the most important trade-offs. A multi-load backscatter architecture is developed using a resource constrained low-power microcontroller, levering DMA to achieve high switching speeds while minimizing processing overhead. Furthermore, we present a layout agnostic load design methodology based on scattering parameters, allowing precise control of the reflection coefficients. A prototype implementation demonstrates a successful backscatter transmission of a single-sideband chirp with reduced harmonic distortion. Measurement results show suppression of the backscattered carrier and the second sideband by 10 dBm. This demonstrates that low-cost sensor nodes can be built using COTS components enabling remote monitoring at extended lifetimes.

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tijl Schepens, Liesbet Van der Perre, Gilles Callebaut. 2026-09-23. Towards Energy-Neutral IoT Sensors: Low-Cost Chirp-Based Backscattering Node Using a COTS Microcontroller and Multi-Load Front-End. https://arxiv.org/abs/2609.28052

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Towards optimal algorithms for the recovery of low-dimensional models with linear rates

We consider the problem of recovering elements of a low-dimensional model from linear measurements. From signal and image processing to inverse problems in data science, this question has been at the center of many applications. Lately, with the success of models and methods relying on deep neural networks, there has been a multiplication of different algorithms and recovery results. Comparing the performance of recovery algorithms becomes a complex task without a unifying framework. In this article, as a first step for the study of general algorithms for low-dimensional recovery, we study a class of generalized projected gradient descent algorithms that can recover a given low-dimensional model with linear rates. The obtained rates decouple the impact of the quality of the measurements with respect to the model from the geometry of the properties of the chosen generalized projection: we can directly measure performance through a restricted Lipschitz constant of the projection with respect to the low dimensional model. By optimizing this constant, we define an optimal generalized projected gradient descent. Our general approach provides an optimality result in the case of sparse recovery. Moreover, our framework allows for a common interpretation of linear rates of recovery in the context of both sparse models and models induced by some ``plug-and-play'' imaging methods that rely on deep neural networks. These rates of recovery are observed in experiments on synthetic and real data.

eess.SP↗
arXiv2026

Tracking Driving Stressors through Multimodal Physiological Monitoring

Understanding and mitigating driving stress is important for improving road safety and driver well-being. Reliable estimation, however, requires distinguishing biobehavioral responses to individual stressors from gradual physiological and contextual changes. We collected physiological data and vehicle telemetry from 31 participants across 44 simulated-driving sessions containing controlled stressor events. Under cross-validation, a multimodal classifier achieved an AUROC of 0.768 when distinguishing the stressor phase from an earlier baseline, reflecting both stressor effects and temporal drift. Controlling for drift retained an AUROC of 0.661, but revealed stronger responses to sustained than brief stressors, and shifted feature attribution toward phasic cardiac and electrodermal markers. We further quantified the interaction between model-estimated physiological stress and observable changes in vehicle control through simulation telemetry. Our findings show that stressor-aware modeling can identify physiologically grounded responses that correspond to meaningful changes in driving behavior.

eess.SP↗
arXiv2026

Resolution-Aliasing Trade-off in Near-Field Localisation

Extremely Large-scale MIMO (XL-MIMO) systems operating in Near-Field (NF) introduce new degrees of freedom for accurate source localisation, but make dense arrays impractical. Sparse or distributed arrays can reduce hardware complexity while maintaining high resolution, yet sub-Nyquist spatial sampling introduces aliasing artefacts in the localisation ambiguity function. This paper presents a unified framework to jointly characterise resolution and aliasing in NF localisation and study the trade-off between the two. Leveraging the concept of local chirp spatial frequency, we derive analytical expressions linking array geometry and sampling density to the spatial bandwidth of the received field. We introduce two geometric tools--Critical Antenna Elements (CAEs) and the Non-Contributive Zone (NCZ)--to intuitively identify how individual antennas contribute to resolution and/or aliasing. Our analysis reveals that resolution and aliasing are not always strictly coupled, e.g., increasing the array aperture can improve resolution without necessarily aggravating aliasing. These results provide practical guidelines for designing NF arrays that optimally balance resolution and aliasing, supporting efficient XL-MIMO deployment.

eess.SP↗