arXiv · 2609.25294
Controller-Only False Confirmation in Passive RF UAV Link Detection
Abstract
Passive radio frequency (RF) sensing is widely used for counter-unmanned-aerial-vehicle (counter-UAV) detection. Existing studies commonly report high accuracy against background RF or WiFi/Bluetooth interference, but rarely isolate controller-only operation without a linked aircraft. We present a dual-band software-defined radio (SDR) measurement study with ambient, controller-only, and linked states for three commercial UAV platforms (DJI Phantom 3 4K, Hubsan H501S, DJI Mavic Mini). Two USRP B210 receivers simultaneously scan eight 2.4 GHz and twelve 5.8 GHz observation windows across twenty rounds. We first train an energy-based detector using linked and ambient scans only. At four ranked concurrent dwell steps (8 s), it achieves 0.992 linked-versus-ambient balanced accuracy but false-confirms 30 out of 60 controller-only scans (FCRctrl = 0.500). We then include controller-only scans in training and use confirm, reject, and defer outputs under an explicit controller-only false-confirmation-rate (FCR) constraint. For the pooled all-platform analysis, the constraint reduces observed FCRctrl from 0.350 to 0.050, while confirm-linked TPR decreases from 0.900 to 0.400 and 42.1% of scans are deferred. The corresponding compact scan performs substantially better for Hubsan and Mavic than for Phantom. A hardware-in-loop experiment reduces measured wall-clock time from 82.9 s to 28.9 s. These measurements show that linked-versus-background accuracy does not measure controller-only false confirmation and that this error should be reported separately.
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
Rajendra Upadhyay, Rajendra Paudyal, Al Nahian Bin Emran, Duminda Wijesekera. 2026-09-21. Controller-Only False Confirmation in Passive RF UAV Link Detection. https://arxiv.org/abs/2609.25294
Cite the original work for its findings. Save a collection to share your selection of sources.