A Vision Based Framework Integrating Attention and Action Cues for Interpretable Cognitive Workload Assessment in Human-Robot Collaborative Assembly

Junyan Xiong; Naiyi Feng; Xingke Xia; Qihang Fan; Suchang Chen; Daqiang Guo

Home/Archive/arXiv

arXiv · 2609.15232

A Vision Based Framework Integrating Attention and Action Cues for Interpretable Cognitive Workload Assessment in Human-Robot Collaborative Assembly

Junyan Xiong·Naiyi Feng·Xingke Xia·Qihang Fan·Suchang Chen·Daqiang Guo

View original source ↗Read source document ↗Export metadata ↓

Abstract

The introduction of human-robot collaboration (HRC) in industrial assembly operations is revolutionizing the manufacturing landscape. In this evolving environment, operators are required to seamlessly coordinate their manual tasks with real-time task information and robotic behaviors. These demands fluctuate during operation, yet conventional workload assessments depend on body-worn physiological sensors that complicate practical deployment. Here, we present a vision-based attention--action framework for continuous and interpretable workload-related assessment in HRC assembly. The framework combines RGB-D observations with robot states and calibrated task-related areas to construct a temporally confirmed representation of operator behavior. This representation identifies where task demand is concentrated and explains how it develops when attention and action diverge, the task context changes, or the operator hesitates. We evaluated the framework in a three-level collaborative gearbox assembly experiment with ten participants, using subjective ratings and synchronized physiological signals as independent references. Raw NASA-TLX ratings confirmed increasing perceived workload across conditions, with significant effects on overall workload and its mental and temporal dimensions. The vision-derived HRC-CWL output was significantly associated with ECG-derived features in seven of nine participants with complete correlation data. Synchronized interaction episodes further showed temporal correspondence between detected hesitation and physiological activity. Real-time deployment demonstrated that the framework can operate without requiring operators to wear additional sensors. These findings support HRC-CWL as an interpretable behavioral proxy for cognitive ergonomics analysis and adaptive robot assistance, rather than a direct psychophysiological measure of workload.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Junyan Xiong, Naiyi Feng, Xingke Xia, Qihang Fan, Suchang Chen, Daqiang Guo. 2026-09-15. A Vision Based Framework Integrating Attention and Action Cues for Interpretable Cognitive Workload Assessment in Human-Robot Collaborative Assembly. https://arxiv.org/abs/2609.15232

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO↗

arXiv2026

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO↗

arXiv2026

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO↗