Inverse Maxwell-Based Wall-Aware OFDM-ISAC for Slow-Moving Target Sensing

Abstract

In this paper, we study integrated sensing and communication (ISAC) for short-range indoor orthogonal frequency-division multiplexing (OFDM) systems in which the sensing path crosses a building wall. The target is a slow-moving user equipment behind the wall, and its echo is embedded in the wall reflection and static indoor clutter. Because the wall adds excess propagation length, attenuation, and internal reflections, a conventional delay transform reports an apparent range. We therefore formulate physical-range estimation as an inverse Maxwell problem for the known wall: the range operator is the distorted-Born Jacobian of the discretized one-dimensional Helmholtz equation, assembled offline from the calibrated wall and applied online as a per-snapshot range inversion, so that the range-Doppler map is indexed by physical rather than apparent range. We then prove that this operator carries a structural limitation: when the two-way wall factor has constant magnitude and linear phase, the wall-aware range image is identically the free-space image on a translated grid, for every ridge level, taper, and noise realization. A free-space branch translated by the same excess length is therefore a required comparison. Sensing-only numerical results for a representative layered wall, with every branch on one range grid and a common post-FFT CSI model, show that the proposed inverse removes the range bias that wall-unaware processing cannot, and that a scalar-corrected free-space inverse tracks it closely, the two differing only marginally in empirical range RMSE and detection probability across the tested sweep.