arXiv ScienceSearch

arXiv · 2607.29229

Space-charge compensation of a low-energy He2+ beam with fluorine-containing gases

Abstract

This study investigates the space-charge compensation (SCC) of a low-energy He2+ beam by introducing fluorine-containing gases into the low-energy beam transport line (LEBT) of the RIKEN Heavy-Ion Linear Accelerator. The introduction of SF6, C3F8, and CHF3 improved beam transmission through the LEBT, and the largest improvement was obtained using SF6. In contrast, the increase in the beam current with Kr was relatively small, and its effect was less pronounced than that of the fluorine-containing gases. The introduction of fluorine-containing gases increased the rise time of the chopped beam to approximately 10 ms. Experiments performed without the prebuncher confirmed that the prebuncher was largely responsible for this slow rise. Furthermore, the substantial difference in the rise time between Kr and the fluorine-containing gases suggests that different charge carriers may contribute to the SCC in these two cases. Based on the results, a new grid-type beam chopper was installed immediately upstream of the radio-frequency quadrupole linac (RFQ). This configuration allows short beam pulses to be generated immediately before the RFQ while maintaining a direct-current beam in the LEBT, thereby achieving both an effective SCC and a fast beam-current rise. In an acceleration test using the new chopper, a 19.3 micro A He2+ beam was successfully and stably accelerated to the radioisotope-production beamline at a duty factor of 10%. This corresponds to approximately 193 micro A in continuous-wave mode operation, demonstrating that the proposed method is effective for realizing the acceleration of a 200 micro A-class He2+ beam.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Takashi Nagatomo, Yasuyuki Morita, Osamu Kamigaito. 2026-08-07. Space-charge compensation of a low-energy He2+ beam with fluorine-containing gases. https://arxiv.org/abs/2607.29229

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Approximate solution of an adapted Bethe transport equation for electron scattering in foils

A new semi-analytical model for electron scattering in foils is presented valid for thin foils and electron-beam kinetic energies up to roughly $100$ keV and from 20 keV at a dimensionless foil thickness of $20$, and higher energies for thinner foils. To perform calculations, an approximate solution is constructed by Hankel transforms of an adapted Bethe transport equation for electron scattering. The Wentzel differential cross section is used in the Bethe transport Eq. and resulting integrals are solved analytically or approximated. These approximate solutions of the transport Eq.'s were compared to the Goudsmit-Saunderson solutions in gold, for thin samples with dimensionless thicknesses $λ=5,10,20$. We also compare to the Kawrakow \cite{Kawr} model, which uses the small angle approximation. We show that in the regime of $20$ to $100$ keV beam energies, our model performs better than Kawrakow's model and this is opposite above about 100 keV. Exactly, some angularly distributed beams and the influence of energy loss of the beam can be simulated with our model.

physics.acc-ph

Reconstruction of Beam Transverse Parameters in the Fermilab Side-Coupled Linac Using a Normalized Coordinate Framework

Quadrupole scans are a commonly used tool for beam second moment reconstruction. Limitations in the strength of the magnets and layout of the beamline elements frequently preclude simple quadrupole-drift-detector scans from collecting sufficient data for reconstruction. Using a normalized coordinate framework, we characterize the prerequisites for a robust simple quadrupole scan and expand these prerequisites to reconstruction from more complex optics. The beam second moments are investigated at two locations in the Fermilab Side-Coupled Linac under simple and complex optics, using this framework to maximize information gained from wire scanner profile measurements.

physics.acc-ph

Impedance of multilayer cylindrical structures with a material-filled beam region

Beam-coupling impedances in material media are relevant for ionization-cooling channels of a future muon collider, where the beam propagates in matter rather than vacuum. We extend the cylindrical field-matching formalism for multilayer structures to the case of a material-filled beam region surrounded by external layers with arbitrary electromagnetic properties. Relative to the vacuum formulation, the usual factor $1/γ^2$ is replaced by the material-dependent factor $F=1/\varepsilon_1-μ_1β^2$, and the radial propagation constant is modified accordingly. Analytical expressions are obtained for the monopolar longitudinal and dipolar transverse impedances, with the surrounding structure encoded through reflection coefficients determined by field matching. The formalism reduces to the known vacuum and perfectly conducting limits in the appropriate cases. Representative calculations are presented for absorber-relevant configurations, illustrating the dependence on the material properties of both the beam region and the surrounding layers. In particular, a finite beam-region conductivity can generate a real impedance component and reverse the sign of the imaginary space-charge impedance, while sufficiently high permittivity can give rise to resonant structures associated with oscillatory radial fields. The effect of finite-conductivity surroundings is also examined, showing the approach towards the perfectly conducting limit as the external conductivity is increased. The applicability of the infinite-length approximation is also discussed by comparison with finite-length mode-matching results.

physics.acc-ph