arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2607.19585

Characterising the response of an International LOFAR Station

Letizia Vincetti·Sai C. Susarla·Owen A. Johnson·Evan F. Keane·David J. McKenna·Tobia D. Carozzi·Gavin Ramsay·Oisin Creaner·Peter T. Gallagher·Joe McCauley
View original source ↗Read source document ↗Export metadata ↓

Abstract

Phased-array radio interferometers with fixed antennas are a highly scalable design which can achieve a large gain. However they are complex systems and challenging to calibrate. Here we examine the response of an International LOFAR Station, the high-band antennas of the Irish LOFAR station. In modelling our measured responses, we account for projection effects, the frequency-dependence of the aperture efficiency and pulsar spectra, as well as sky and instrumental noise contributions. We perform long-track observations of 11 bright pulsars as they move across the sky, apply RFI mitigation and determine the signal-to-noise ratio response as a function of time, elevation and azimuth. We use the DreamBeam software to model the beam response of the station to compare with what is observed. The sensitivity map so obtained was validated using observations of PSR B0329+54 on the Swedish LOFAR station. As expected, the sensitivity is higher near the zenith. However, an asymmetry with respect to the zenith point is detected. Characterising the instrumental response in azimuth reveals a better performance as the targets rise, as compared to when they set. This trend is seen for all pulsars and is consistent with other International Stations. The magnitude of the effect can exceed 20%. We consider variations in the beam model and noise level, both frequency- and time- dependent, to try to account for this. A possible explanation for the hysteresis-like response in elevation could be an imbalanced signal weighting of the polarisation components. This work addresses the importance of accurate beam modelling and noise evaluation for the LOFAR 2.0 system upgrade as well as being relevant to the under-construction SKA-Low facility.

Explore related subjects

astro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Letizia Vincetti, Sai C. Susarla, Owen A. Johnson, Evan F. Keane, David J. McKenna, Tobia D. Carozzi, Gavin Ramsay, Oisin Creaner, Peter T. Gallagher, Joe McCauley. 2026-07-21. Characterising the response of an International LOFAR Station. https://doi.org/10.33232/001c.165435

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Scale-Vector Alignment: A Scale-Aware Framework for Spatially Resolved Morphological Similarity in Astronomical Images

Astronomical maps made with different tracers are not expected to have identical morphology. Excitation, optical depth, chemistry, radiation, and ISM phase alter the response of a tracer, and the resulting differences can depend on both position and spatial scale. We propose scale-vector alignment, a scale-aware method based on Constrained Diffusion Decomposition (CDD). CDD decomposes an image into localized scale components; at each position, their amplitudes define a scale vector that describes how the measured intensity is distributed over spatial scale. We define the pixel-wise similarity $\Spix(x,y)$ as the normalized alignment of two local scale vectors. The normalization removes the overall amplitude, so $\Spix$ compares relative scale composition rather than absolute flux. We also define the scale-wise similarity $\Sscale(l)$ by comparing the two CDD component maps at each spatial scale. Spatial shifts are used to construct an empirical shifted reference distribution for $\Spix$. In Orion~A, the tracer with the highest similarity to the dust-derived column-density map changes from $^{12}$CO to $^{13}$CO to C$^{18}$O toward higher column density. In NGC~6334I(N), the line--continuum similarity decreases locally around the brightest compact structures, where radiative-transfer effects can alter the observed line morphology. In NGC~3627, CO is most similar to 21~$μ$m emission, and $\Sscale$ reaches its maximum at an intermediate sub-kpc scale. The method measures where two tracers have similar multiscale structure and at which scales their spatial distributions agree. The implementation is publicly available at https://github.com/meng-ke/Scale-Vector-Alignment.

astro-ph.IM↗
arXiv2026

Fast and accurate astronomical source deblending with Density-Peak Clustering

Source deblending is a fundamental challenge for current and forthcoming astronomical surveys, where increasing source density and image depth lead to a growing number of overlapping detections. Accurate deblending is essential for reliable measurements of source morphology and photometry, as well as for cosmological analyses. We present a redesign of the Advanced Density Peak (ADP) clustering algorithm, tailored to the identification and separation of blended astronomical sources within detection regions. We develop a validation framework combining realistic image simulations, automatically generated ground-truth segmentation, and label-invariant metrics. ADP is assessed against ASTErIsM, an established density-based astronomical deblender, using pairwise simulations, synthetic multi-source images, and Euclid Q1 public data. In pairwise simulations, the methods show comparable performance across a broad range of source separations and flux ratios, with photometric differences typically below 1% and reaching 5-7% in the most challenging cases, without systematic bias. In multi-source simulations, ADP recovers approximately 8% more ground-truth sources, while the positions of sources identified by both methods agree at the sub-pixel level. On Euclid Q1 public data, the methods show strong agreement in segmentation area, ellipticity, position angle, and photometry, with the largest differences for the smallest and faintest sources. ADP also provides a substantial computational advantage: end-to-end benchmarks on 19200 x 19200 pixel Euclid images require approximately 16-200 s, corresponding to speedups of 12-156x relative to ASTErIsM, with median and mean improvements of 36x and 54x, respectively. These results show that ADP provides scientifically competitive deblending at substantially lower computational cost, making it a promising approach for large-scale astronomical imaging surveys.

astro-ph.IM↗
arXiv2026

IceCube Upgrade status and perspectives

The IceCube Neutrino Observatory instruments one cubic kilometer of deep-glacial ice between 1450 m and 2450 m below the surface at the geographic South Pole to detect neutrinos via Cherenkov radiation of relativistic charged particles produced in their interactions. This detector is responsible for a number of key observations in neutrino astrophysics, which include the discovery of a high-energy astrophysical neutrino flux and, more recently, the galactic plane. During the austral summer of 2025/26, five new strings equipped with new photosensor designs were deployed as a dense infill in the middle of the existing detector. The science goals of this detector are twofold: Firstly, given the higher photocathode density, an improved atmospheric neutrino event selection and reconstruction at a few GeV can be achieved for enhanced capabilities to study neutrino oscillations. Secondly, novel calibration devices will improve the knowledge of the optical properties of the glacial ice and the detector response. These new calibration results will be applied to archival IceCube data, improving angular and spatial resolution of all detected astrophysical neutrino events. The IceCube Upgrade also serves as a first step towards the next-generation neutrino telescope at the South Pole, called IceCube-Gen2.

astro-ph.IM↗