Calibrated Multichannel Monocular Ranging From Standardized License Plates With Metrology-Exact Validation

Abstract

Longitudinal driver assistance depends on the distance to the vehicle ahead, a quantity normally supplied by radar, laser scanner, or stereo pair. However, a low-cost camera can estimate the distance as well, taking the rear license plate as a metric reference, including standards fix both the plate envelope and the regulated character height, so the pinhole projection converts either one into a distance. This research presents a approach and validates it. Plate localization now withstands the low-contrast and cluttered frames that previously drew the detector onto the vehicle body, or onto the character cluster of a sparsely lettered plate. Character height, plate outline, and mounting-hole span form three distance channels, merged by a consensus gated inverse-variance fusion that discards a corrupted channel before it can bias the result, with each channel separately corrected for the foreshortening of the direction along which it is measured, the correction following from the plate's recovered attitude. Finally, an innovation gate protects the temporal filter, so that a single bad detection cannot become a false warning. Evaluation is carried out in a metrology-exact testbed in which the commanded distance is the true distance, through 51 USA registries with distances of 1 to 12 m and viewing angles to 30 degrees under five lighting conditions. The plate is located in every frame. Mean absolute percentage error is 4.32% for the outline channel, while the fusion returns 5.79% mean and 2.17% median, without any of its single-channel failure modes. Roll is recovered to within one degree; the two out-of-plane tilts only to within several. The algorithm can provide a solid foundation for low-cost distance estimation which can serve as an emergency backup for other sensors.