arXiv ScienceSearch

arXiv · 2606.02038

Uncertainty-Aware Graph Neural Reconstruction of Urban Temperature Fields from Sparse Sensors under Deployment Constraints

Abstract

Reconstructing spatially continuous daily temperature fields from sparse observations is important for urban climate monitoring and heat-risk analysis, but practical deployments are limited by sensor budgets and spacing constraints. This study proposes an uncertainty-aware graph neural network (GNN) framework for reconstructing daily maximum temperature fields from sparse sensors while supporting distance-constrained sensor placement and probabilistic exceedance mapping. The model predicts both the temperature field and a spatially varying predictive uncertainty field using a graph-attention-based mean-residual architecture trained with a Gaussian negative log-likelihood. Sensor placement is addressed using a Proper Orthogonal Decomposition with QR factorization (POD-QR) strategy with a 4 km minimum inter-sensor distance constraint and is compared with random feasible placement and farthest-point sampling. The framework is evaluated over a Montreal-area polygon using Daymet v4.1 daily temperature data (1 km resolution) under a strict temporal hold-out protocol (training: 2020-2023; testing: 2024). Across sensor budgets (10-40 sensors), the proposed GNN consistently outperforms inverse distance weighting and ordinary kriging in RMSE and MAE on unobserved nodes. Sensor-placement effects are most pronounced at low budgets and diminish at higher budgets, with a practical saturation regime emerging around 30 sensors under the imposed spacing constraint. Probabilistic evaluation further shows improved uncertainty calibration with increasing sensor density and a better sharpness-calibration trade-off than kriging. These results support the proposed framework as an effective tool for uncertainty-aware temperature field reconstruction and decision-oriented heat-risk mapping.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Reda Snaiki, Abdelatif Merabtine. 2026-06-01. Uncertainty-Aware Graph Neural Reconstruction of Urban Temperature Fields from Sparse Sensors under Deployment Constraints. https://arxiv.org/abs/2606.02038

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

RCS angular control with gradient metasurfaces: design and measurement

This letter proposes the design and measurement of a periodic metasurface that achieves anomalous reflection with reduced RCS in a given parasitic direction. A previous study proposed a semi-analytical model to predict the RCS behavior of such a metasurface. However, this first study did not include any experimental exploration to verify the theoretical results. To complete this study, this work presents an experimental validation of the proposed design, with a focus on manufacturing and measurement issues. The synthesis, design specifications, fabrication method and experimental setup are presented and discussed. Measurement results are also examined in detail, highlighting some limitations in metasurfaces RCS measurements. The proposed metasurface effectively achieves the predicted RCS level reduction in the considered parasitic direction. The agreement between simulation and experimental results demonstrates the accuracy of the modelling and the efficiency of the optimisation procedure.

physics.app-ph

Maximum-Power-Transfer Power Coordinates for Fully Coupled Multiport Thévenin Sources

A power-normalized scattering representation is developed at a fixed frequency for a passive linear time-invariant multiport load driven by a fully coupled multiport Thévenin source. The source is obtained by reducing, at the load reference planes, an independent-source network whose suppressed internal impedance is passive, together with an intervening passive matching network. No diagonal-reference, uncoupled-source-channel, reciprocity, or commutation assumption is required. With $R_s=\mathrm{Herm}\{Z_s\}\succ\mathbf{0}$, completing the square in accepted power identifies the available-power current and motivates the coordinates $\mathbf{a}=\frac12R_s^{-1/2}(\mathbf{V}+Z_s\mathbf{I})$, $\mathbf{b}=\frac12R_s^{-1/2}(\mathbf{V}-Z_s^H\mathbf{I})$. They satisfy $\|\mathbf{a}\|_2^2-\|\mathbf{b}\|_2^2=\Re\{\mathbf{I}^H\mathbf{V}\}$ and yield $\mathbf{S}=R_s^{-1/2}(Z_{load}-Z_s^H)(Z_{load}+Z_s)^{-1}R_s^{1/2}$. An exact operator identity establishes passivity--contractivity equivalence and gives excitation-specific, reachable-subspace, and complete conjugate-matching conditions. On the physically reachable incident subspace, singular values characterize the best- and worst-case source-normalized port-reflection TARC, while a restricted Frobenius norm gives the basis-averaged squared TARC. Equal-magnitude phase-only control is formulated separately as a constant-modulus problem, with generator-side constraints mapped through the coupled source network before power normalization. For antenna loads and excitations with $P_{acc}>0$, $P_{rad}/P_{av}=η_{rad}(1-\mathrm{TARC}^2)$, so terminal scattering data alone do not determine radiation efficiency. When $R_s$ is singular, finite available power exists exactly for $\mathbf{E}\in\mathrm{range}(R_s)$, and the construction applies on the positive-resistance support.

physics.app-ph

Bimorph Lithium Niobate Thickness-Shear Overtone Film Bulk Acoustic Resonator

High quality factor ($Q$) and overtone operation enable narrow-linewidth acoustic devices with multiple discrete frequencies in a single cavity. Maintaining both high $Q$ and sufficient electromechanical coupling at higher mode orders remains challenging. Here, we demonstrate a bimorph periodically poled piezoelectric film (P3F) lithium niobate (LN) platform for high-order thickness-shear (TS) overtone excitation. The device comprises a bonded 80-$μ$m-thick single-crystal X-cut LN bimorph with opposite polarizations, patterned top and floating bottom electrodes, and a suspended air cavity. The P3F configuration mitigates charge cancellation from the alternating stress distribution of higher-order TS modes, enabling measurable coupling across a broad sequence of overtones. The thick LN acoustic cavity and increasingly confined high-order mode profiles support low-loss operation. Measured TS overtones extend to 1.75 GHz. At room temperature, representative overtones at 0.77 and 0.89 GHz exhibit 3-dB $Q$ values of 11,338 and 11,917, corresponding to $fQ$ products of $8.74\times10^{12}$ and $1.06\times10^{13}$ Hz, respectively. Cooling from 297 to 12 K systematically enhances $Q$, yielding a peak 3-dB $Q$ of 20,507 at 779 MHz and a maximum $fQ$ product of $1.98\times10^{13}$ Hz at 1.379 GHz. These results establish bimorph P3F LN as a promising platform for high-$Q$, frequency-scalable micro-acoustic resonators in the sub-GHz and low-GHz regimes.

physics.app-ph