Transonic flow past the complex cavity-sub-cavity configurations

Abstract

The study investigates the physics of unsteady flow in complex cavity geometries operating in the transonic regime. A two-dimensional Detached Eddy Simulation (DES) approach is used for the preliminary analysis. The cavity configuration examined in this work arises from the integration of a scramjet engine with a launch vehicle. In this integrated geometry, the isolator section serves as a deep sub-cavity, while the Single Expansion Ramp Nozzle (SERN) constitutes the primary cavity. The combined arrangement therefore constitutes a complex cavity-sub-cavity system, which is referred to as such throughout the paper. The qualitative analysis revealed a feedback loop within the complex cavity-sub-cavity system, leading to high-pressure oscillations across the geometry. A monotonic increase in pressure loading is observed with increasing Mach number. Varying the cavity topology demonstrated that modifications to the primary cavity geometry strongly alter shear-layer dynamics and significantly affect the pressure distribution within the cavity-sub-cavity system. To mitigate adverse pressure oscillations, passive control strategies, including trailing-edge wall chamfering and a ventilated (slotted) sub-cavity, are investigated. Among the configurations studied, the slotted sub-cavity case exhibits the most pronounced suppression of pressure loads, particularly on the sub-cavity end wall. Spectral Proper Orthogonal Decomposition (SPOD) analysis also revealed the restructuring of dominant coherent modes in response to topological variations and to the implementation of passive control, providing insight into the underlying governing mechanism.