Acoustic Black Hole Damper for Thermoacoustic Instability Control in a Hydrogen Combustor

Bayu Dharmaputra; Klejsi Curumi; Nicolas Noiray

Home/Archive/arXiv

arXiv · 2603.28231

Acoustic Black Hole Damper for Thermoacoustic Instability Control in a Hydrogen Combustor

Bayu Dharmaputra·Klejsi Curumi·Nicolas Noiray

View original source ↗Read source document ↗Export metadata ↓

Abstract

Thermoacoustic instabilities remain a major challenge in the operation and development of modern gas turbine combustors for power generation and propulsion. In laboratory environments, such instabilities can also hinder the accurate characterization of key thermoacoustic properties of the flames. Many modern combustors therefore employ wall-mounted acoustic dampers, such as Helmholtz or quarter-wave resonators; however, these devices are typically effective only over narrow frequency ranges. In this study, the application of perforated acoustic black holes (ABHs) as broadband passive dampers for thermoacoustic instability mitigation is investigated. Several ABH designs are additively manufactured and experimentally characterized through scattering matrix measurements. A reduced-order model based on the transfer matrix method is developed and is shown to be in good agreement with the experimental results. Using this validated model, a damper design is optimized to maximize acoustic dissipation over the frequency range 500-2000 Hz. The optimized perforated ABH damper is installed in the plenum section of the combustor test rig, and its thermoacoustic performance is evaluated over a range of equivalence ratios and outlet boundary conditions. Across all operating conditions considered, the ABH damper leads to a substantial reduction of the amplitude of the acoustic pressure oscillations. These results demonstrate the potential of perforated ABH-based dampers as a robust and broadband passive solution for mitigating thermoacoustic instabilities in hydrogen-fueled combustors.

Explore related subjects

physics.flu-dyn

Keep this discovery

BibTeX RIS

Bayu Dharmaputra, Klejsi Curumi, Nicolas Noiray. 2026-03-30. Acoustic Black Hole Damper for Thermoacoustic Instability Control in a Hydrogen Combustor. https://arxiv.org/abs/2603.28231

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Correlative effects of induced magnetic field-buoyancy on reactive solute dispersion dynamics in couple-stress fluids

We investigate the dispersion of a reactive solute in a couple-stress fluid flowing between two parallel plates under the combined effects of pressure-driven flow, buoyancy, and an induced magnetic field. The model incorporates first-order heterogeneous reactions at both channel walls alongside a bulk reaction. Using Mei's multiscale homogenization technique accurate to third order, we develop a higher-order asymptotic formulation to determine the effective longitudinal dispersion coefficient and concentration field. Analytical predictions are complemented by Brownian dynamics simulations and finite-difference solutions, while the Aris method of moments quantifies transient mean displacement, spatial variance, and effective dispersivity. The hydrodynamic analysis reveals a singular branch in the velocity solution when the Hartmann number equals half the couple-stress parameter and identifies a characteristic quarter-power scaling between the Hartmann number and couple-stress parameter, separating couple-stress- and magnetically dominated regimes. The model recovers classical Taylor-dispersion behavior in the non-reactive Newtonian limit and agrees well with experimental measurements. Couple-stress rheology and magnetic damping suppress shear-induced dispersion, whereas buoyancy enhances dispersion through additional transverse velocity gradients. A distinct saturation regime of the dispersion coefficient emerges with an increasing couple-stress parameter, while unequal wall absorption induces persistent transverse asymmetry, and stronger absorption enhances solute removal near the source. Numerical and stochastic results validate the analytical framework while resolving higher-order concentration structures and particle-scale wall adsorption.

physics.flu-dyn↗

arXiv2026

DiffSWE2d: a differentiable Shallow Water Equations solver for end-to-end flood and tsunami modelling

Solving inverse and optimisation problems with traditional shallow water equations (SWE) solvers can be computationally expensive, particularly when gradients with respect to model inputs or parameters must be estimated through repeated forward simulations. In this paper, we introduce DiffSWE2d, an open-source differentiable shallow water equations solver for end-to-end flood and tsunami modelling implemented in PyTorch. By leveraging automatic differentiation, DiffSWE2d represents the time-marching physics as a differentiable computational graph, enabling gradients to be propagated directly through the numerical solver. We validate the solver against two established benchmark cases and demonstrate its application to tsunami waveform inversion, showing its ability to infer model inputs through gradient-based optimisation. DiffSWE2d provides a flexible framework for integrating physics-based hydrodynamic modelling with modern optimisation and machine learning methods. The source code and reproducible examples are publicly available at: https://github.com/ZhonghouXu/DiffSWE2d

physics.flu-dyn↗

arXiv2026

Low inertia limit of elasto-inertial turbulence

Pipe and channel flows of viscoelastic fluids display chaotic dynamics at unusually low speeds, a phenomenon referred to as elasto-inertial turbulence, EIT. First reported in experiments a century ago, recent theoretical studies and model computations predict a variety of scenarios for the phenomenon's origin, ranging from hoop stress modes to center modes and to Tollmien-Schlichting waves. Lacking experimental confirmation, the relevant scenario in actual flows of polymer solutions remains unknown. We here determine the transition threshold of EIT in pipe experiments, covering three decades in elasticity number. Across this entire parameter range, the transition features center mode structures at onset. Eventually the instability diverges at a lower inertia (upper elasticity) limit, which is a robust signature of this center mode scenario. Finally, we report the first experimental observation of a traveling wave in viscoelastic pipe flow, and the sequences of localized structures found, are in excellent agreement with a center mode traveling wave, the "arrowhead" solution, discovered in model simulations.

physics.flu-dyn↗