arXiv ScienceSearch

arXiv · 2603.26613

On the Codesign of Scientific Experiments and Industrial Systems

Abstract

The optimization of large experiments in fundamental science, such as detectors for subnuclear physics at particle colliders, shares with the optimization of complex systems for industrial or societal applications the common issue of addressing the inter-relation between parameters describing the hardware used in data production and parameters used to analyse those data. While in many cases this coupling can be ignored -- when the problem can be successfully factored into simpler sub-tasks and the latter addressed serially -- there are situations in which that approach fails to converge to the absolute maximum of expected performance, as it results in a mis-alignment of the optimized hardware and software solutions. In this work we consider a few use cases of interest in fundamental science collected primarily from particle physics and related areas, and a pot-pourri of industrial and societal applications where the matter is similarly of relevance. We discuss the emergence of strong hardware-software coupling in some of those systems, as well as co-design procedures that may be deployed to identify the global maximum of their relevant utility functions. We observe how numerous opportunities exist to advance methods and tools for hardware-software co-design optimization, bridging fundamental science and industry through application- and challenge-driven projects, and shaping the future of scientific experiments and industrial systems.

Explore related subjects

Keep this discovery

BibTeXRIS

Tommaso Dorigo, Pietro Vischia, Shahzaib Abbas, Tosin Adewumi, Lama Alkhaled, Lorenzo Arsini, Muhammad Awais, Maxim Borisyak, András Bóta, Florian Bury, Sascha Caron, James Carzon, Long Chen, Prakash C. Chhipa, Paul Christakopoulos, Jacopo De Piccoli, Andrea De Vita, Zlatan Dimitrov, Michele Doro, Luigi Favaro, Francesco Ferranti, Santiago Folgueras, Rihab Gargouri, Nicolas R. Gauger, Andrea Giammanco, Christian Glaser, Tobias Golling, João A. Gonçalves, Hui Han, Hamza Hanif, Lukas Heinrich, Yan Chai Hum, Florent Imbert, Andreas Ipp, Michael Kagan, Noor Kainat Syeda, Rukshak Kapoor, Aparup Khatua, Eduard J. Kerkhoven, Jan Kieseler, Tobias Kortus, Ashish Kumar Singh, Marius S. Köppel, Daniel Lanchares, Ann Lee, Pelayo Leguina, Christos Leonidopoulos, Giuseppe Levi, Boying Li, Chang Liu, Marcus Liwicki, Karl Lowenmark, Enrico Lupi, Carlo Mancini-Terracciano, Dominik Maršík, Leonidas Matsakas, Hamam Mokayed, Federico Nardi, Amirhossein Nayebiastaneh, Xuan T. Nguyen, Aitor Orio, Jingjing Pan, Jigar Patel, Carmelo Pellegrino, María Pereira Martínez, Karolos Potamianos, Shah Rukh Qasim, Martin Ravn, Luis Recabarren Vergara, Humberto Reyes-González, Hipolito A. Riveros Guevara, Ippocratis D. Saltas, Rajkumar Saini, Fredrik Sandin, Alexander Schilling, Kylian Schmidt, Nicola Serra, Saqib Shahzad, Foteini Simistira Liwicki, Giles C. Strong, Kristian Tchiorniy, Mia Tosi, Andrey Ustyuzhanin, Xabier Cid Vidal, Kinga A. Wozniak, Mengqing Wu, Zahraa Zaher. 2026-03-27. On the Codesign of Scientific Experiments and Industrial Systems. https://arxiv.org/abs/2603.26613

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det