Evaluating the Performance of a Modified Skin Temperature Sensor for Lower Limb Prostheses: An Experimental Comparison

Anirshu Devroy; Gregor Fritz; Mathias Brandstoetter

Home/Archive/arXiv

arXiv · 2511.21068

Evaluating the Performance of a Modified Skin Temperature Sensor for Lower Limb Prostheses: An Experimental Comparison

Anirshu Devroy·Gregor Fritz·Mathias Brandstoetter

View original source ↗Read source document ↗Export metadata ↓

Abstract

Current rehabilitation of lower limb prostheses has significant challenges, especially with skin conditions, irritation and discomfort. Understanding the skin temperature and having comfortable wearable sensors that would monitor skin temperature in a real-time outdoor environment would be useful. The system would help the user and orthopedic technician to provide feedback and changes that might be required in the prosthesis. Hence in this paper, a series of experiments are conducted in order to understand and characterize the system behavior and compare a general thermistor and a modified thermistor as a potential method of temperature measurement for outdoor usage of prostheses. The paper goes on to compare the different modified thermistors behavior with their regular counterpart and highlights the challenges and improvement areas needed for such a modified thermistor for outdoor temperature monitoring in a prosthetic system. Initial results show that some of the modified thermistors showed better temperature recording compared to the rest. Finally, such modified thermistors can be a potential alternative for comfortable temperature measurement embedded in the prosthesis system. Such a system can provide valuable insights into temperature distribution and an early warning system for skin problems

Explore related subjects

eess.SP

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Anirshu Devroy, Gregor Fritz, Mathias Brandstoetter. 2025-11-26. Evaluating the Performance of a Modified Skin Temperature Sensor for Lower Limb Prostheses: An Experimental Comparison. https://arxiv.org/abs/2511.21068

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Multi-Carrier Rydberg Atomic Quantum Receivers with Enhanced Bandwidth Feature for Communication and Sensing

Rydberg atomic quantum receivers (RAQRs) have attracted significant attention in recent years due to their ultra-high sensitivity. Although capable of precisely detecting the amplitude and phase of weak signals, conventional RAQRs face inherent limitations in accurately receiving wideband RF signals, due to the discrete nature of atomic energy levels and their intrinsic instantaneous bandwidth constraints. These limitations hinder their direct application to multi-carrier communication and sensing. To address this issue, this paper proposes a multi-carrier Rydberg atomic quantum receiver (MC-RAQR) structure with five energy levels. We derive the amplitude and phase of the MC-RAQR and extract the baseband electrical signal for signal processing. In terms of multi-carrier communication and sensing, we analyze the channel capacity and accuracy of angle of arrival (AoA) and distance parameters, respectively. Numerical results validate our proposed model, showing that the MC-RAQR can achieve up to a bandwidth of 11.7 MHz, which is 17-fold larger than the conventional RAQRs. As a result, the channel capacity and the resolution for multi-target sensing are improved significantly. Specifically, the channel capacity of MC-RAQR is 110-fold and 2.8-fold larger than the classical RF receivers and RAQRs, respectively. For sensing performance, the RMSE of AoA estimation for MC-RAQR exhibits 7.6-fold reduction, compared with the conventional RAQRs. Furthermore, the RMSE of distance estimation is $634$-fold smaller than that of the root-CRB of classical RF receivers, showing the superior performance of the MC-RAQR. This demonstrates its compatibility with waveforms such as orthogonal frequency-division multiplexing (OFDM) and its significant advantages for multi-carrier signal reception.

eess.SP↗

arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗

arXiv2026

Joint Subcarrier Phase Recovery for Nonlinearity Mitigation

We propose a low-complexity phase recovery scheme that simultaneously mitigates laser phase noise and fiber nonlinearity across several subcarriers. In a long single-span link with Raman amplification, the scheme achieves 0.9 dB gain with 99 real multiplications per complex symbol.

eess.SP↗