arXiv ScienceSearch

arXiv · 2510.19878

Characterising the properties of the atmospheric emission at Teide Observatory in the 10-20 GHz range with QUIJOTE data

Abstract

QUIJOTE is a CMB experiment composed of two telescopes, QT1 and QT2, located at the Teide Observatory in Tenerife, Spain. The MFI instrument (2012-2018), installed on QT1, observed the sky at four frequency bands (11, 13, 17, and 19 GHz) with one degree angular resolution. Its successor, MFI2, began operations in 2024 and operates in the same bands. This paper has two main goals: first, to characterise the atmospheric conditions at Teide Observatory to improve existing models at these frequencies, and second, to empirically characterise atmospheric turbulence using QUIJOTE MFI and MFI2 observations. This work has implications for both atmospheric physics and CMB studies and can support future reanalyses of MFI data or the preparation of upcoming instruments such as the Tenerife Microwave Spectrometer. We used data from GPS antennas, the STELLA observatory, and radio soundings to derive median profiles and distributions of key atmospheric parameters for 2012-2018. MFI data were analysed to compute atmospheric structure functions at 17 and 19 GHz and to study the correlation properties of the atmospheric signal through cross-correlation between horns at the same frequency. MFI2 observations were used to estimate the atmospheric power spectrum and compare it with the structure function derived from MFI data. The water vapour density profile follows an exponential decay with a characteristic half-height of about 1000 m. Median PWV in 2012-2018 is 3.3 mm. For high PWV conditions, the structure function agrees with the Kolmogorov turbulence model. The slope of the power spectrum also matches the model prediction, within the frequency range limited by the outer scale and instrument noise. Finally, from the correlation function, we find that atmospheric conditions remain stable for about 1-2 hours.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Apolline Chappard, José Alberto Rubiño-Martín, Ricardo Tanausú Génova Santos. 2025-10-22. Characterising the properties of the atmospheric emission at Teide Observatory in the 10-20 GHz range with QUIJOTE data. https://arxiv.org/abs/2510.19878

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Surface Stokes drift from compact drifting wave buoys

Surface Stokes drift depends strongly on the energy and directions of short waves, which are incompletely resolved by routine wave observations. We derive surface Stokes drift vectors from wave measurements collected by compact drifting buoys during three deployments in the North-East Atlantic and the Alboran Sea. The calculation uses vertical-acceleration spectra and first directional Fourier moments, which describe the mean wave direction and directional concentration at each frequency; it accounts for the Doppler shift caused by buoy motion relative to the water and adds a calibrated high-frequency tail above an intrinsic frequency of 0.7 Hz. Across 13,139 records, the median estimated speed is 0.081 m/s at a median wind speed of 6.8 m/s. Over the measured band of 0.04-1 Hz, accounting for wave directions reduces the magnitude by a median 39% relative to the unidirectional assumption. The median ratio of the parameterised tail magnitude above 0.7 Hz to the total estimated magnitude is 0.37. Comparisons with WAVEWATCH III and Copernicus Marine MFWAM show strong covariation and similar wind-dependent differences from the buoy-derived estimates. On the station-matched sample from the two Atlantic deployments, WAVEWATCH III directional spectra indicate that these differences within the compared band arise mainly from spectral levels rather than from net directional reduction. The observations provide constraints for model evaluation; the contribution of the unresolved short waves remains sensitive to the assumed spectral tail and its directional spreading.

physics.ao-ph

Unreported large errors from two PAMGuard three-dimensional localizers of whale calls

Confidence intervals of location (CIL) of calling marine mammals, derived from time-differences-of-arrival (TDOA) between receivers, depend on errors of TDOAs, receiver location, clocks, sound speeds, and location method. When these errors are minuscule, simulations yield small errors of PAMGuard's 3D simplex localizer when click sounds of beaked and sperm whales originate in a 1000 x 1000 x 1000 $\mbox{m}^3$ region using five receivers having horizontal and vertical separations of 1000 m and 150 m respectively. Realistic uncertainties of sound speed up to $\pm 10$ m/s lead to errors up to $10^{14}$ m. With clocks maintained by atomic standards and common practice of correcting TDOA from synchronization measurements at the start and end of an experiment, errors of location are up to $10^{4}$ m. Errors up to $10^2$ and $10^3$ m are found when the receiver's locations are uncertain within 10 and 40 m respectively. Errors of PAMGuard's 3D hyperbolic localizer are almost independent of the above uncertainties, yielding errors of location up to about $10^4$ m even when simulated errors are minuscule. Causes of PAMGuard's 3D location errors are unknown. These algorithms are briefly compared to another method designed to yield a reliable CIL.

physics.ao-ph

Tropospheric Ozone Formation Potential and Related Design Considerations for Radiative Coolers

Recently, radiative coolers have been widely explored for reducing cooling loads or lowering temperatures in buildings, and at urban scales as a heat-mitigation measure. However, the potential impacts of radiative cooler deployment on the chemical composition of the atmosphere remain largely unexplored. A defining feature of recently-designed radiative coolers is their high ultraviolet (UV) reflectance, which is required for sub-ambient cooling under strong sunlight. Yet, wide adoption of such UV-reflective radiative coolers could substantially increase the UV actinic flux in the atmosphere above. This, in turn, may affect tropospheric ozone concentrations, particularly in urban atmospheres with high NOx concentrations. Here, as a case study, we use a 0-dimensional photochemical box model, constrained by field measurements of meteorological conditions and chemical concentrations in the urban environment of Houston, Texas, to explore the potential impact of the widespread use of UV-reflective radiative coolers on ozone concentrations. Our calculations show that complete deployment of radiative coolers may increase tropospheric ozone levels by as much as 30% during specific meteorological conditions in Houston. Informed by the wavelength-dependent modelling results, we propose specific designs, namely pigmented radiative coolers with different UV reflectances, and UV-absorptive visible-reemitting fluorescent radiative coolers, that could minimize negative ozone formation while retaining appreciable cooling performance. Our results motivate further study on the effects of widespread deployment of radiative cooling designs like superwhite roof paints on air quality, and materials that simultaneously minimize adverse photochemical impact and maximize cooling performance.

physics.ao-ph