Experimental and numerical study on the influence of extra-depth on cut blasting post-blast damage

Abstract

Cutting is a key factor affecting the speed of blasting excavation. With the continuous advancement of deep-hole blasting technology, determining the optimal extra-depth of the cut relative to the non-cut blast hole is of paramount importance. By combining model experiments and numerical simulations, this study systematically investigates the effect of extra-depth on post-blast damage morphology, damage width, depth, area, and fractal damage. Furthermore, numerical simulations were employed to validate the experimental results from the perspectives of damage evolution and peak pressure at monitoring points. The main findings are as follows: The extra-depth of the cut has a significant nonlinear effect on the blasting outcome. As the extra-depth increases, blasting damage initially increases but decreases beyond a critical depth due to marginal effects, leading to the appearance of residual blast hole features. Under experimental conditions, when the extra-depth was 15 mm, the damage depth, width, and area reached their maximum values of 43.5 mm, 109.9 mm, and 6055.2 mm, respectively, indicating optimal blasting performance. The fractal damage of the specimen also exhibited a significant trend of initially increasing and then decreasing. The maximum fractal damage, obtained by deriving the fitting curve, was 0.75, corresponding to an extra-depth of 13.7 mm. The numerical simulation results are in good agreement with the experimental findings, showing a significant downward shift in the peak pressure points in the damage zone with increasing extra-depth. In summary, an appropriate extra-depth can achieve optimal borehole utilization, while an excessive extra-depth can lead to residual blast hole formation at the bottom of the cut, reducing effectiveness. This study provides theoretical guidance for optimizing the design parameters of extra-depth in deep-hole blasting.